• Fashion & Textile Research Journal
• /
• v.17 no.5
• /
• pp.838-843
• /
• 2015

In this study, a cotton knit was dyed with elm bark extract; subsequently, the dyed fabric was measured according to the types of mordants and the preprocessing cationizers used. Additionally, antibiosis against super bacteria was examined. The results follow. First, the color of the dyed cotton knit appeared reddish and yellowish for fabrics treated with non-mordants and mordants. When preprocessing with a cationizer was conducted, the dyeing properties were the best. Second. even when mordants were not used for dyeing, color fastness after washing, sweating, and rubbing was generally good Grade 4 and 5. Color fastness after exposure to sunlight was the best Grade 4 for fabric prepared with ferrous sulfate as the mordant. Third. as for antimicrobial properties, or resistance to super bacteria, the growth of bacteria was suppressed in a meaningful way for fabrics treated with non-mordants and mordants, compared to the control group fabric. The dyeing methods with the most powerful antimicrobial effects were dyeing after preprocessing with a cationizer and preparing fabric with copper sulfate as the mordant. The results stated above show that in case of dyeing with elm bark extract, preprocessing of the cotton knit with a cationizer and dying with copper mordant displayed high levels of antimicrobial properties that were useful for resisting super bacteria. Of these the dyeing properties were the best when preprocessing with a cationizer.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.154-154
• /
• 2017

In accordance with the opening of the Korean rice market, this study was focused on establishment of database for discriminating the Korean rice varieties and imported brand rices using DNA markers. In this study, the SNP markers were developed using single nucleotide polymorphisms between the reference sequences of japonica and them of 40 brand rices which collected in Australia, China, Thailand, United States and Vietnam. The developed SNP markers were screened to a total of 360 rices including 320 Korean rice varieties and 40 imported brand rices. We selected polymorphic markers among Korean bred rive varieties and imported brand rices. The selected markers were classified into 3 grades. The markers of A grade produced DNA band in 360 rices of 30~40%, B grades produced in 40~60%, and C grades produced bands over 60% rices. First, we tried to set-up the discriminating system using the minimum SNP markers of A grade. Especially, a set of sixteen SNP markers could identify among Korean bred rice varieties and imported brand rices. Additionally, some SNP markers like NSb for Pib gene, JJ80-T for Pi5 and YL155/YL87 for Pita which linked to resistance genes to blast were used to fingerprinting system. These markers were set-up as multiplex set for enhancing the identification efficiency among rice varieties. Finally, the selected SNP markers would be used to the fluidigm assay to construct the database for elaborate discrimination of rice varieties.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.24 no.2
• /
• pp.187-196
• /
• 2021

Purpose: The rising prevalence of childhood obesity in the past decades has caused non-alcoholic fatty liver disease (NAFLD) to become the most common cause of pediatric chronic liver disease worldwide. This study was aimed at determining the effect of vitamin D (Vit D) on ultrasonography and laboratory indices of NAFLD and some blood biochemical indicators in children. Methods: In this interventional study liver ultrasonography was performed in 200 children with overweight and obesity. A 108 had fatty liver among which 101 were randomly divided into two groups of study (n=51) and control (n=50). The study group was treated with Vit D, 50000 U once a week whereas the control group received placebo with the same dose and package, both for 12 weeks. At the end of the intervention lab tests and ultrasound study was performed once again to evaluate the response to treatment. Results: It was found out that Vit D supplementation improved the fatty liver grade in the study group. The mean changes in hemoglobin (Hb), uric acid, highdensity lipoprotein cholesterol (HDL-C), low-density lipoprotein cholesterol (LDL-C), insulin, albumin and alanine aminotransferase (ALT) was significantly higher in the study group compared to controls (p<0.05). After the intervention and means adjustment, a significant difference was obtained in HDL-C, insulin, LDL-C and homeostasis model assessment of insulin resistance (HOMA-IR) between the two groups. Conclusion: Vit D supplementation in addition to improving the fatty liver grade in ultrasonography and increasing the blood Vit D level, increases the HDL and Hb level besides decreasing uric acid, LDL, HOMA-IR, insulin and ALT levels.

• Membrane Journal
• /
• v.32 no.6
• /
• pp.496-513
• /
• 2022

In this study, we sought to verify the applicability of anion exchange membrane water electrolysis system using FAA-3-50, Neosepta-ASE, Sustainion grade T, and Fujifilm type 10, which are commercial anion exchange membranes. The morphology of the commercial membranes and the elements on the surface were analyzed using SEM/EDX to confirm the distribution of functional groups included in the commercial membranes. In addition, mechanical strength and decomposition temperature were measured using UTM and TGA to check whether the driving conditions of the water electrolyte were satisfied. The ion exchange capacity and ion conductivity were measured to understand the performance of anion exchange membranes, and the alkaline resistance of each commercial membrane was checked and durability test was performed because they were driven in an alkaline environment. Finally, a membrane-electrode assembly was manufactured and a water electrolysis single cell test was performed to confirm cell performance at 60℃, 70℃, and 80℃. The long-term cell test was measured 20 cycles at other temperatures to compare water electrolysis performance.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.4
• /
• pp.442-450
• /
• 2012

In this study, fire resistance and residual strength were examined after the addition of PF fiber and bonding fireproofing gypsum board to a high strength concrete-model column of 50 MPa grade. At the beginning of the experiment, all the properties of base concrete appeared to satisfy the target range. In terms of the internal temperature record, a trend of slightly high temperature was shown when the fireproofing gypsum board was not bonding, and when the fireproofing gypsum board was bonding, as PF content increased gradually, the temperature was gradually lowered. In terms of the relationship, as time elapsed a low temperature was shown when fiber was mixed, and when the board was bonding, the trend of lower temperature could be confirmed. Meanwhile, in terms of spalling property, a severe explosive fracture was generated at PF 0%, and falling off was prevented as the fiber content was increased; however, discoloration and a multitude of cracks were discovered, and when the board was bonding, the trend in which the exterior became satisfactory when the content was increased emerged. In terms of the residual compressive strength, measuring of strength could not be performed at PF 0% without bonding of board, and the strength was increased as the fiber content was increased; however, there was a decrease in strength of about 30 ~ 40%, and in the case of PF 0% with the bonding of board, the strength could be measured; however, about an 80% decrease in strength was shown, and only about a 10 ~ 20% decline in strength was displayed, as the range of decrease was reduced as the fiber content was increased. Considering all of these factors, it was determined that a more efficient enhancement of fire resistance was obtained when two methods are applied in combination rather than when the PF fiber content and bonding of fireproofing gypsum board are utilized individually.

• Journal of the Korean Ceramic Society
• /
• v.41 no.3
• /
• pp.210-215
• /
• 2004

Porous ceramics for water-permeable paving brick was prepared by the sintering of mixed materials comprising of sewage sludge ash, waste porcelain fragment, waste glaze and low-grade clay at 1,000$^{\circ}C$ for 2 h, and the physical $.$mechanical properties, the permeability and the freeze-thaw resistance of specimens with preparation parameters were investigated. The physical mechanical properties were increased in specimens while porosity and permeability were decreased with increasing sewage sludge ash content and sintering temperature on the properties of specimens showed the opposite results. The bulk density, porosity, compressive strength and permeability (passed charge) of 30A60F specimens with 30 wt% of sewage sludge ash content, waste porcelain fragment size with 1∼2 mm and sintered at 1,000$^{\circ}C$ for 2 h were 2.17, 46.2%, 221 kgf/$\textrm{cm}^2$ and 3,150 coulombs, respectively. The permeability was increased with increasing waste porcelain fragment size, however compressive strength was decreased. The freeze-thaw resistance of 30A60F specimen with 1∼2 mm of fragment size was superior to that of the other specimens. The 30A60F specimens can be used for the water-permeable paving brick with the high permeability and adequate strength. The heavy metals included in the all specimens showed lower than the standard level.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.4
• /
• pp.42-51
• /
• 2010

The purpose of this study is to analyze the characteristics of environment-friendliness of Root Barrier materials based on comprehensive experiments on harmfulness of Root Barrier materials and fish toxicity of Oryzias latipes mortality to verify eco-toxicity of each method of construction and Root Barrier material, which are to be applied by taking eco-toxicity into account when building ecological flows in upper areas on natural and artificial grounds. As a result, the following conclusions have been reached in this study: 1. In regard of the harmfulness analyzed, each material showed a different result of analytical value in each lab tank. Compared to lab tank, pH (la), DO (lb), T-N (VI) and T-coli (la) were in the same grade, but COD, SS, T-P and F-coli were less than that of control, respectively increased or decreased by material were analyzed. 2. In the experiment of fish toxicity, Barrier sheet was found to have 66.7% of fish mortality, indicating strong fish toxicity. Synthetic rubber system root barrier sheet (20.0%) was analyzed to have medium fish toxicity, while Synthetic resin system root barrier-waterproof sheet (3.3%), Synthetic rubber system membrane root barrier sheet (3.3%) and Synthetic resin system root barrier sheet (0.0%) showed relatively lower mortality and fish toxicity. To sum up such results as found in the experiment mentioned so far, the values of harmfulness and root penetration resistance analyzed were different in each lab tank, but there was absolutely little correlation with the mortality gained from the experiment on fish toxicity. In the experiment of fish toxicity, environment-friendly root barrier materials were analyzed, and it was found that Synthetic resin system root barrier sheet, Synthetic resin system root barrier waterproof sheet and Synthetic rubber system membrane root barrier sheet are highly environment-friendly. In contrast, Synthetic rubber system root barrier sheet was found to have medium-level environment-friendliness. Also, Barrier sheet was analyzed to have low environment-friendliness.

• Fashion & Textile Research Journal
• /
• v.17 no.5
• /
• pp.781-792
• /
• 2015

This study aims to develop a spring/fall motorcycle jacket for quick service transporter. Depending on the results of the previous research, this study produced the tested jacket which was improved in material, pattern, and design. For the tested jacket, 100% polyester fabric excellent in strength, durability and abrasion-resistance was selected as a major material, and Cordura was used as a partial material to improve the strength and abrasion-resistance of the sleeve side lines, elbow and shoulder areas. The retro-reflection material was applied partially in order to improve visibility of the jacket in the night or in a dark place. A total of 7 pockets were composed in the jacket for the sufficient storage spaces. The functional design elements such as the 2-way zipper and the placket at the center front, the action pleats at the upper part of back armholes, the pit-zip at armpit were applied. In addition, the sleeve pattern was bent with the shape of elbow curvature in time of driving and the back length of the jacket was lengthened 4cm. As a result of the appearance assessment, there was a significant difference from the existing jacket in all items but chest size, shoulder width, cuffs circumference, and jacket hemline circumference. In motion adaptability and field activity appropriateness assessments, the assessment grade for all items was found to be commonly higher than that of the existing jacket, and thus, the tested jacket was assessed to be suitable for a motorcycle jacket design for the quick service transporters.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.307-315
• /
• 2002

Major factors affecting the impact resistance of high impact polystyrene (HIPS), the rubber-toughened grade of polystyrene, are rubber-phase particle size and size distribution, molecular weight, morphology, and degree of grafting. Accordingly, it is important to control or investigate these factors. In this study, the effect of solvent content was analyzed by the morphology and particle size distribution of rubber phase, and final properties in bulk-solution polymerization of HIPS. The prepolymerization time was, first, determined by measuring the evolution of particle size distribution of dispersed phase to explain the phase inversion with time. As the solvent content increased, the size of rubber particle increased and then gradually decreased. Rubber-phase morphology was likely to have higher degree of grafting as the solvent content increased. Rheological and mechanical properties decreased as the solvent content increased because of the decrease of matrix molecular weight due to the chain transfer reaction to solvent and the existence of residual solvent. Nevertheless, the impact resistance seemed to increase when the rubber particle size increased.

• Journal of Korean Neurosurgical Society
• /
• v.39 no.1
• /
• pp.20-25
• /
• 2006

Objective : The authors analyze prospectively the result of transcranial doppler[TCD] in normal pressure hydrocephalus and compared its cerebral blood flow parameters to radionuclide cerebrospinal fluid[CSF] flow study, postoperative brain computed tomography[CT] findings and clinical outcome, and studied the relationship between cerebral hemodynamics and clinical performance. Methods : Twenty five patients with hydrocephalus undertook pre- and post-operative TCD but only preoperative CSF flow study was performed. Mean flow velocity[Vm], pulsatility index[PI] and resistance index[RI] were assessed through TCD and changes in ventricle size and cortical gyral atrophy were checked through brain CT. Results : Postoperative hydrocephalus showed an increase in Vm[ACA P=0.037, MCA P=0.034], decrease in PI[ACA P=0.019, MCA P=0.017] and decrease in RI [ACA P=0.017, MCA P=0.021] compared to preoperative TCD parameters in the postoperative improvement group. In the postoperative improvement group, postoperative TCD parameters correlated with CSF flow study grade [Vm : $R^2=-0.75$, PI : $R^2=0.86$, RI : $R^2=0.78$] and ventriculocranial ratio change correlated with PI change [$R^2=0.73$]. The convexity gyral atrophy and initial TCD parameters showed close relationship to outcome. Conclusion : PI and RI can be used as an indicator of post operative prognosis, and with the addition of CSF flow study values, can also be used as a tool to predict pre-op and post-op patient status and successful shunt surgery.