The Properties of Permeability and Freeze-Thaw Resistance of Water-Permeable Paving Brick Using Wastes

Porous ceramics for water-permeable paving brick was prepared by the sintering of mixed materials comprising of sewage sludge ash, waste porcelain fragment, waste glaze and low-grade clay at 1,000$^{\circ}C$ for 2 h, and the physical $.$mechanical properties, the permeability and the freeze-thaw resistance of specimens with preparation parameters were investigated. The physical mechanical properties were increased in specimens while porosity and permeability were decreased with increasing sewage sludge ash content and sintering temperature on the properties of specimens showed the opposite results. The bulk density, porosity, compressive strength and permeability (passed charge) of 30A60F specimens with 30 wt% of sewage sludge ash content, waste porcelain fragment size with 1∼2 mm and sintered at 1,000$^{\circ}C$ for 2 h were 2.17, 46.2%, 221 kgf/$\textrm{cm}^2$ and 3,150 coulombs, respectively. The permeability was increased with increasing waste porcelain fragment size, however compressive strength was decreased. The freeze-thaw resistance of 30A60F specimen with 1∼2 mm of fragment size was superior to that of the other specimens. The 30A60F specimens can be used for the water-permeable paving brick with the high permeability and adequate strength. The heavy metals included in the all specimens showed lower than the standard level.

폐기물을 이용한 투수블록의 투수성 및 동결융해저항 특성

하수슬러지 소각재, 폐도자기 파편, 폐유약 및 저급점토를 이용하여 1,00$0^{\circ}C$에서 2시간 소성하여 투수블록용 다공질 세라믹스를 제조하여 제조인자에 따른 물리 $.$역학적 특성, 투수특성 및 동결음해특성을 조사하였다. 폐도자기 파편의 크기가 동일한 시편은 소성온도와 소각재의 첨가량이 증가함에 따라 부피비중과 압축강도는 증가하였으나, 기공률과 투수성은 감소하였다. 소성온도와 소각재의 첨가량이 동일한 시편은 폐도자기 파편의 크기가 증가하면 부피비중과 압축강도는 감소하고 기공률과 투수성은 증가하였다. 폐도자기 파편의 크기가 1∼2 mm이고 1,00$0^{\circ}C$에서 2시간 소성한 30A60F시편은 부피비중 2.17, 기공률 46.2%, 압축강도 221 kgf/$\textrm{cm}^2$ 및 통과전하량이 3,150 coulombs이었으며, 동결융해 저항성이 우수하여 투수블록으로 사용이 가능하였다. 투수블록 시편에 함유된 중금속은 허용기준치보다 낮아 무해하였다.