• Journal of Technologic Dentistry
• /
• v.14 no.1
• /
• pp.133-138
• /
• 1992

The base of a metal base denture that is made of acrylic resin base and metal in lined by soft liner named silicon rubber and its merits are as follows. 1. It has a good retention and fastness. 2. It has a good comfort and stability. 3. It is easy to mix various kinds of base materials. 4. It is easy to repair. 5. The pressure of bone and mucosal tissue is decreased and bite force is dispersed.

• Journal of the Korean Society for Heat Treatment
• /
• v.23 no.2
• /
• pp.83-89
• /
• 2010

Diamond-like carbon (DLC) coating was studied to be a good tribological problem-solver due to its low friction characteristics and high hardness. However, generally hydrogenated DLC film has shown a weak thermal stability above $300^{\circ}C$. However, the silicon doping DLC process by DC pulse plasma enhanced chemical vapor deposition (PECVD) for the new DLC coating which has a good characterization with thermal stability at high temperature itself has been observed. And we were discussed a process for optimizing silicon content to promote a good thermal stability using various tetramethylsilane (TMS) and methane gas at high-temperature. The chemical compositions of silicon-containing DLC film was analyzed using X-ray photoelectron spectroscopy (XPS) before and after heat treatment. Raman spectrum analysis showed the changed structure on the surface after the high-temperature exposure testing. In particular, the hardness of silicon-containing DLC film showed different values before and after the annealing treatment.

• Journal of the Korean Society for Heat Treatment
• /
• v.25 no.5
• /
• pp.227-232
• /
• 2012

Magnesium alloy have good physical properties such as good castability, good vibration absorption, high strength/weight ratios. Despite the desirable properties, the poor resistance of Mg alloy impedes their use in many various applications. Therefore, magnesium alloy require surface treatment to improve hardness, corrosion and wear resistance. Plasma Electrolytic Oxidation (PEO) is one the surface treatment methods to form oxide layer on Mg alloy in alkali electrolyte. In comparison with Anodizing, there is environmental process having higher hardness and faster deposition rate. In this study, the characteristics of oxide film were examined after coating the AZ31 Mg alloy through the PEO process. We changed concentration of sodium aluminate into $K_2ZrF_6$, KF base electrolyte. The morphologies of the coating layer were characterized by using scanning electron microscopy (SEM). Corrosion resistance also investigated by potentiodynamic polarization analysis. As a result, propertiy of oxide layer were changed by concentration of sodium aluminate. Increasing with concentration of sodium aluminate in electrolyte, the oxidation layer was denser and the pore size was smaller on the surface.

• Journal of the Korean institute of surface engineering
• /
• v.45 no.2
• /
• pp.81-88
• /
• 2012

Probe tip, which should have not only superior electrical characteristics but also good abrasion resistance for numerous contacts with semiconductor pads to confirm their availability, is essential for MEMS probe card. To obtain good durability of probe tip, it needs thick and crack-free rhodium layer on the tip. However, when the rhodium thickness deposited by electroplating increased, unwanted cracks by high internal stress led to serious problem of MEMS probe tip. This article reported the method of thick Rh deposition with Au buffer layer on the probe tip to overcome the problem of high internal stress and studied mechanical and electrical properties of that. MEMS probe tip with double-Rh layer had good contact resistance and durability during long term touch downs.

• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 2003.10a
• /
• pp.104-105
• /
• 2003

In order to breed high yielding good quality leaves mulberry cultivar, which is essential for silkworm rearing, the characteristics of newly bred mulberry strain were surveyed. Materials and Methods: materials -Mulberry Jamgsang 123 which is registered as newly bred mulbery cultivar Suilppong -Sikworm Baegogjam nd Daesungjam were reared for practical leaves quality examination in spring and autumn, respectively by feeding Jamsang 123 leaves (omitted)

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2054-2057
• /
• 2005

In this paper, the application of finite element method to design the shape of load cell as an illustrative case study is described. The relationship between the various shapes of load cell and their stress characteristic were analyzed by COSMOS simulation program. The results obtained from the proposed analysis can be applied to determine the appropriate position of strain gauges for good quality load cell. The experimental results show the good efficiency of the proposed technique.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.768-771
• /
• 2003

Nowadays, the study on the ceramic components and modules used in telecommunication system is being performed. Duplexer is the one of the most important components and has the role of dividing Rx and Tx signal. Duplexer including the FBAR is being done vigorously LTCC is used for package like SAW package, duplexer package. In our research, LTCC material is used for FBAR duplexer package and photo-lithography for the fine line phase shifter. The good characteristics, low loss and good isolation, of duplexer is obtained by the fine line phase shifter having high characteristic impedance of stripline.

• Journal of Convergence for Information Technology
• /
• v.10 no.12
• /
• pp.58-66
• /
• 2020

The purpose of this study was to investigate levels of perception of good death and hospice, and attitude of dying care, to examine relationships among them, and then to investigate predictors affecting of attitude of dying care in nursing students. The participants were 229 nursing students in D city who were surveyed in May to June 2019 using self-report questionnaires. Perception of good death and hospice, and attitude of dying care were related positively among variables. In the multiple regression analysis, perception of good death, and perception of hospice were influential factors significantly associated with the attitude of dying care. Those factors explained 39.3% of the attitude of dying care in nursing students. The most important factor was perception of hospice. In order to encourage and improve positive perception of death and attitude of dying care in nursing students, nursing educators should consider building up and reinforcing the curriculum of nursing college.

• Computers and Concrete
• /
• v.4 no.6
• /
• pp.499-510
• /
• 2007

The densified mixture design algorithm (DMDA) was employed to manufacture high-performance lightweight concrete (LWAC) using silt dredged from reservoirs in southern Taiwan. Dredged silt undergoing hydration and high-temperature sintering was made into a lightweight aggregate for concrete mixing. The workability and durability of the resulting concrete were examined. The LWAC made from dredged silt had high flowability, which implies good workability. Additionally, the LWAC also had good compressive strength and anti-corrosion properties, high surface electrical resistivity and ultrasonic pulse velocity as well as low chloride penetration, all of which are indicators of good durability.

• TTA Journal
• /
• s.86
• /
• pp.89-93
• /
• 2003

TTA(한국정보통신기술협회)는 2003년 2월 28일, 품질인증 제품으로 ㈜하나디에스디의''라이프에듀빌더 v 1.0'', ㈜연성정보기술의''이메일플러스 v 3.0'', ㈜포스정보의''책꽂이KDC v 3.1'', ㈜켈코인의''챌린저 웹진 웹스쿨 v 3.0'' 등 4개의 제품에 대하여 Good Software 마크를 발급하였다. 그리고 2003년 3월 10일에 VeriTest-TTA 인증제품으로 (주)스페이스 인터내셔널의''CD Tower v 3.1''은 VeriTest-TTA Good Quality, Optimized Performance & Internationalized 마크를, ㈜포스데이터의''BizBinder v 1.0''은 VeriTest-TTA Good Quality & Optimized Performance 인증마크를 발급하였다. 본 고에서는 상위의 인증 획득한 제품에 대하여 소개하고자 한다.