• Journal of Sensor Science and Technology
• /
• v.29 no.2
• /
• pp.93-99
• /
• 2020

A colorimetric paper sensor was used to detect volatile nitrogen-containing compounds emitted from spoiled salmon filets to determine their freshness. The sensing mechanism was based on acid-base reactions between acidic pH-indicating dyes and basic volatile ammonia and amines. A sensing layer was simply fabricated by drop-casting a dye solution of bromocresol green (BCG) on a polyvinylidene fluoride substrate, and its color-change response was enhanced by optimizing the amounts of additive chemicals, such as polyethylene glycol, p-toluene sulfonic acid, and graphene oxide in the dye solution. To avoid the adverse effects of water vapor, both faces of the sensing layer were enclosed by using a polyethylene terephthalate film and a gas-permeable microporous polytetrafluoroethylene sheet, respectively. When exposed to basic gas analytes, the paper-like sensor distinctly exhibited a color change from initially yellow, then to green, and finally to blue due to the deprotonation of BCG via the Brønsted acid-base reaction. The use of ammonia analyte as a test gas confirmed that the sensing performance of the optimized sensor was reversible and excellent (detection time of < 15 min, sensitive naked-eye detection at 0.25 ppm, good selectivity to common volatile organic gases, and good stability against thermal stress). Finally, the coloration intensity of the sensor was quantified as a function of the storage time of the salmon filet at 28℃ to evaluate its usefulness in monitoring of the food freshness with the measurement of the total viable count (TVC) of microorganisms in the food. The TVC value increased from 3.2 × 10⁵ to 3.1 × 10⁹ cfu/g in 28 h and then became stable, whereas the sensor response abruptly changed in the first 8 h and slightly increased thereafter. This result suggests that the colorimetric response could be used as an indicator for evaluating the degree of decay of salmon induced by microorganisms.

• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.539-544
• /
• 2020

A three-dimensional (3D) porous polyaniline (PANI) film was fabricated by a combined photo-and soft-lithography technique based on a large-area nanopillar array, followed by a controlled chemical dilute polymerization. The as-obtained 3D PANI film consisted of hierarchically interconnected PANI nanofibers, resulting in a 3D hierarchical nanoweb film with a large surface and open porous structure. Using electrochemical measurements, the resulting 3D PANI film was demonstrated as a flexible pH sensor electrode, exhibiting a high sensitivity of 60.3 mV/pH, which is close to the ideal Nernstian behavior. In addition, the 3D PANI electrode showed a fast response time of 10 s, good repeatability, and good selectivity. When the 3D PANI electrode was measured under a mechanically bent state, the electrode exhibited a high sensitivity of 60.4 mV/pH, demonstrating flexible pH sensor performance.

• Journal of Food Hygiene and Safety
• /
• v.28 no.1
• /
• pp.56-62
• /
• 2013

Poly (ethylene naphthalate) (PEN), which is likely to be widely used in various application due to good barrier properties, is manufactured by condensation polymerization of 2,6-dimethylnaphthalene dicarboxylate (2,6-NDC) or 2,6-naphthalene dicarboxylic acid (2,6-NDA) with ethylene glycol. In this study, an analytical method to determine monomers in food simulants, which might migrate from PEN food contact materials into food, was developed. The HPLC-UV method was validated for 2,6-NDC and 2,6-NDA. The obtained validation parameters were selectivity, sensitivity, linearity, precision and recovery. The simultaneous HPLC method was considered the be most effective analytical method to determine 2,6-NDC and 2,6-NDA in food simulants.

• The Korean Journal of Pesticide Science
• /
• v.6 no.2
• /
• pp.58-63
• /
• 2002

New photodynamic herbicidal 2,3-dihydro-2,2,4,5,6-pentamethylbenzofuran-5-yl, (I) and 2,3-dihydro-2-ethyl-2,4,5,6-tetramethylbenzofuran-5-yl, (II) substituents in 6-benzofury-2-[1-( alkoxyimino )alkyl]-3 hydroxycyclohex-2-en-1-one derivatives were synthesized and their herbicidal activities against rice plant (Oryza sativa L.), barnyard grass (Echinochloa crus-galli) and pickerel weed (Monochoria vaginalis presl.) were measured under submerged pre and post-emergence conditions. Particularly, a series of (I) compounds showed good selective herbicidal activities between the 3 leaf stage of rice plant and barnyard grass at rates of $0.25{\sim}0.0007kg/ha$. The structure activity relationships (SAR) on the herbicidal activity with changing N-alkoxy groups were discussed quantitatively. According to the SAR results, it was expected that the selectivity factor between seed of rice plant and barnyard grass should be rely on the N-alkoxy groups with bigger dipole moment and bigger (or smaller) $B_3$ constant than optimal value $(B_3)_{opt.}=4.41{\AA}$. Compared with (I), the (II) substituents showed more superior herbicidal activities.

• The Korean Journal of Pesticide Science
• /
• v.6 no.2
• /
• pp.72-79
• /
• 2002

3D-QSAR between fungicidal activitives ($pI_{50}$) against metalaxyl-sensitive (SPC: 95CC7105) or metalaxyl-resisitant (RPC: 95CC7303) isolate of phytophthora blight fungus (Phytophthora capsici), and a set of 3-phenylisoxazole (A) and 3-phenyl-2,5-dihydroisoxazole (B) derivatives as substrates were conducted using comparative molecular field analyses (CoMFA). The antifungal activities of (A) were generally higher than those of (B). And it is assumed that the most stable conformation of the active substrate was approximately planar from conformational search. The CoMFA models proved a good predictive ability and suggested that the electronic field of substrates were higher than hydropohobic field and steric field requirements for recognition forces of the receptor site. And the factors were strongly correlated (cross-validated $q^2>0.570$ & conventional $r^2>0.968$) with the fungicidal activitives. According to the CoMFA analyses, the selectivity factors for RPC suggested that the sterically bulky groups (C14 & C15) and electron withdrawing groups (C15 & C16) have to be introduced to the ortho, meta and para-position on the benzoyl moiety of substrates.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.8
• /
• pp.2577-2583
• /
• 2011

We have designed a 20-residue hybrid peptide CA(1-8)-MA(1-12) (CAMA) incorporating residues 1-8 of cecropin A (CA) and residues 1-12 of magainin 2 (MA) with high bacterial cell selectivity. CAMA-P2 is an ${\alpha}$-helical antimicrobial peptide designed from a CAMA hybrid peptide and substitution of Gly-Ile-Gly hinge sequence of CAMA to Pro influences the flexibility at central part of CAMA. Based on structure-activity relationships of CAMA peptides, to investigate the effects of the total positive charges on antimicrobial activity of CAMA-P2, the $Ser^{14}{\rightarrow}$Lys analogue (CAMA-syn1) was synthesized. The role of tryptophan at C-terminal ${\alpha}$-helix on its antimicrobial activity as well as synergistic activity was also investigated using $Ser^{14}{\rightarrow}$Lys/$Phe^{18}{\rightarrow}$Trp analogue (CAMA-syn2). Also, we designed CAMA-syn3 by substitution of $Lys^{16}$ located opposite side of substituted $Lys^{14}$ of CAMA-syn1 with Leu residue, resulting in increase of hydrophobicity and amphipathicity of the peptide. All of CAMA-syn analogues showed good antimicrobial activities similar to those of CAMA and CAMA-P2. The CAMA-syn1 and CAMA-syn2 showed low hemolytic activity and cytotoxicity against human keratinocyte Haca-T cells while CAMA-syn3 showed hemolytic activity and cytotoxicity at its MIC value. We then investigated their abilities to act synergistically in combination with the antimicrobial flavonoids and synthetic compounds screened in our laboratory. The results showed that all peptides exhibited synergistic effects with dihydrobinetin, while only CAMA-syn2 exhibited synergistic effects with YKAs3001 against both S. aureus and MRSA, suggesting that Trp residue at C-terminus of CAMA-syn2 may facilitate the polar antibiotic flavonoids and synthetic compounds to permeabilize the membrane. This study will be useful for the development of new antibiotic peptides with potent antimicrobial and synergistic activity but without cytotoxicity.

• Korean Journal of Environmental Agriculture
• /
• v.39 no.3
• /
• pp.246-252
• /
• 2020

BACKGROUND: Pesticides are broadly used to control weeds and pests, and the residues remaining in crops are managed in accordance with the MRLs (maximum residue limits). Therefore, an analytical method is required to quantify the residues, and we conducted a series of analyses to select and validate the quick and simple analytical method for tolpyralate in five agricultural products using QuEChERS (quick, easy, cheap, effective, rugged and safe) method and LC-MS/MS (liquid chromatography-tandem mass spectrometry). METHODS AND RESULTS: The agricultural samples were extracted with acetonitrile followed by addition of anhydrous magnesium sulfate, sodium chloride, disodium hydrogencitrate sesquihydrate and trisodium citrate dihydrate. After shaking and centrifugation, purification was performed with d-SPE (dispersive-solid phase extraction) sorbents. To validate the optimized method, its selectivity, linearity, LOD (limit of detection), LOQ (limit of quantitation), accuracy, repeatability, and reproducibility from the inter-laboratory analyses were considered. LOQ of the analytical method was 0.01 mg/kg at five agricultural products and the linearity of matrix-matched calibration were good at seven concentration levels, from 0.0025 to 0.25 mg/L (R²≥0.9980). Mean recoveries at three spiking levels (n=5) were in the range of 85.2~112.4% with associated relative standard deviation values less than 6.2%, and the coefficient of variation between the two laboratories was also below 13%. All optimized results were validated according to the criteria ranges requested in the Codex Alimentarius Commission (CAC) and Ministry of Food and Drug Safety (MFDS) guidelines. CONCLUSION: In conclusion, we suggest that the selected and validated method could serve as a basic data for detecting tolpyralate residue in imported and domestic agricultural products.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2008.04a
• /
• pp.5-20
• /
• 2008

GLP-1-based drugs (GLP-1 analogues and DPP IV inhibitors) and incretin mimetics are currently one of the most exciting classes of agents for type II diabetes. GLP-1, a gut peptide, is an incretin that potentiates glucose-dependent insulin release from the pancreas, slows GI-transit and stimulates the proliferation of beta-cells. DPP IV inhibitors act like incretins by inhibiting DPP IV which inactivates GLP-1. LC15-0133 is a competitive, reversible DPP IV inhibitor ($IC_{50}$ = 24 nM, Ki=0.247 nM) with excellent selectivity over other critical human proteases such as DPP II, DPP 8, elastase, trypsin. and urokinase. LC15-0133 showed long half-life and good bioavailability in rats and dogs. Inhibition of plasma DPP IV activity by LC15-0133 was kept more than 50% 24 hours after oral dosing in rats and dogs at 0.1 mg/kg and 0.02 mg/kg, respectively. The Minimum effective doses of LC15-0133 were 0.01 mg/kg for lowering blood glucose excursion during oral glucose tolerance test and 0.1 mg/kg for increasing glucose-induced GLP-1 response in C57BL/6 mice. Repeat oral administration of LC15-0133 for 1 month delayed the progression to diabetes and reduced HbA1c levels in a dose-dependent manner in Zucker Diabetic Fatty rats. In conclusion, LC15-0133 is a novel, potent, selective and orally active DPP IV inhibitor and showed an excellent blood glucose lowering effects in various animal models.

• Analytical Science and Technology
• /
• v.11 no.3
• /
• pp.161-166
• /
• 1998

Analytical method of haloperidol (HAL) in serum which has been widely used in therapy of schizophrenic disorders is developed. Gas chromatography/nitrogen-phosphorus detection (GC/NPD) was used for this study. Bromoperidol was used as an internal standard and diethylether as a solvent of three-step extraction. The extraction yield in this procedure was $67.5{\pm}1.9%$ at 15 ng/mL. A good linear response in the range of 1~40 ng/mL was obtained with correlation coefficient of $r^2=0.999$. Detection limit was 0.5 ng/mL when 2 mL of serum was used. This method was applied for the analysis of HAL in serum of schizophrenic patients. After HAL decanoate (HD) was intaken as intramuscular route, HAL levels were determined at second week and forth week. From the result, the concentration of HAL at forth week appeared to 29.6% lower than those at second week. The present method showed low detection limit and high selectivity. Therefore it can be applied for the trace analysis of HAL in serum and the monitoring.

• Journal of Sensor Science and Technology
• /
• v.10 no.2
• /
• pp.101-107
• /
• 2001

A highly selective, sensitive and reliable ozone sensing $In_2O_3$ thin film was fabricated by a sol-gel method. The fabricated film is operated at a relatively lower temperature than ever developed thin films and saved operating power. $In_2O_3$ films deposited by sol-gel technique has been recently attracted because it is an economical and energy saving method and precisely controlled microstructure. Indium alkoxide precursor was synthesized from the reaction between indium hydroxide and butanol. PVA binder was used to improve adhesion of the films. The $In_2O_3$ thin films were obtained by spin coating from 1 to 5 times followed by drying at $100^{\circ}C$ and calcining at $600^{\circ}C$ for 1h. The film thickness was controlled by the number of coating time. The morphology and the thickness of the $In_2O_3$ films were examined by a SEM and XRD. The $In_2O_3$ thin films show a high sensitive to ozone gas at operating temperature of $250^{\circ}C$. The $In_2O_3$ sensor has very good selectivity to $CH_4$, CO, $C_4H_{10}$ and ethanol.