• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.158-175
• /
• 2005

Statement of problem. Every effort has been continually made to obtain objectivity in measuring the longevity of fixed restorations, such as by establishing unified judgement standard for deciding success and adopting statistical method that analyzes the data of successful and failed cases at the same time. In Korea, however desired level of development has not to be made in this field yet. Purpose. This study, adopting California Dental Association (CDA) quality evaluation system, established objective standard for deciding success, and inferred the longevity of fixed restorations and their failure analysis through adopting Kaplan-Meier survival analysis. Material and method. In order to assess the longevity of flxed restorations serviced in Korea and causes of failure, a total of 1109 individuals (aged 15-74, 716 women and 393 men loaded with 2551 unit fixed restorations, and 1934 abutments) who lived in Kyung-In Province were examined and the findings were as follows : Results. 1. Length of service of fixed restorations serviced in Korea was 6.86$\pm$0.15 yr (mean), 5.5 yr (median), and the rate of success was 65.82% in 5 year survival, and 21.15% in 10 year survival. 2. When there was patient's need for replacing old prosthetics, longevity of fixed restorations was 7.51$\pm$0.27 yr (mean), 7 yr (median), and the rate of success was 61.08% in 5 year survival, and 17.57% in 10 year survival. 3. Longevity of fixed restorations was longest in the over-sixty age group(9.21$\pm$0.66) and that of the teen age group(3.39$\pm$0.28) was shortest (p<0.05). 4. Longevity of fixed restorations of women (7.38$\pm$0.18 years) was longer than that of men (6.00$\pm$0.26) (p<0.05). 5. As for the provider factor (such as unlicensed performers, university hospitals, and private clinic), there was no statistically significant difference in longevity of fixed restorations. 6. Defective margin (34.78%). periodontal disease (12.15%), periapical involvement (11.73%), was the most frequent causes of failure and poor esthetics group showed the longest life above all (p<0.05). Actual frequent causes of failure after removing old prosthetics were defective margin, periapical involvement, periodontal disease and uncemented restoration. In 75.67% of the cases, abutment state after removing old prosthetics was good enough for loading another prosthetics. 7. There was found to have statistically significant influence between longevity of single crown (6.35$\pm$0.20 yr) and that of 3 unit fixed restorations (7.60$\pm$0.30 y) (p<0.05). In each case the most frequent cause of failure was defective margin. 8. The number of cantilever pontic, pontic/abutment ratio, oral hygiene status were found to have no statistically significant influence on longevity of fixed restorations in all groups (p>0.05). 9. Longevity of fixed restorations made of non precious metal was longest (9.60$\pm$0.40 yr) semi precious and precious trailing behind(p<0.05). 10. Group function group (37.04%) and partial group function group (44.62%) were predominant in frequency but showed no correlation between them and among different types of occlusal plane and different types of occlusal surface (p>0.05). 11. Longevity of fixed restorations was longest in the centric interference group(9.35$\pm$0.62) (p<0.05) among different types of occlusal interference. Conclusion. We found that longevity of fixed restorations serviced in Korea is affected by age, gender and type of material, and that most frequent cause of failure is defective margin. In order to assess the accurate longevity of axed restorations, unified research design. overcoming inter-observer difference and establishing the objective research items are needed. Furthermore, it is thought that prospective approach through thorough study and regular follow-ups is needed just from the start of research. Nationwide detailed studies on length of service of fixed restorations manufactured in Korea are hoped to be conducted hereafter.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.12
• /
• pp.1843-1851
• /
• 2014

This study evaluated the quality characteristics and antioxidant activities of barley Doenjang (soybean paste) containing various contents (4, 12, and 20%) of kelp extracts. After 60 days of fermentation, pH, acidity, and viscosity of Doenjang were 5.80~6.86, 0.57~1.87%, and 4,913.3~9,333.3 cps, respectively, showing significant differences according to content of kelp extracts. Amino-type nitrogen contents was 902.60~921.90 mg%. For color values, L and b values increased significantly (P<0.001), whereas a value decreased slightly according to kelp extracts. DPPH radical scavenging effect ($IC_{50}$) for butylated hydroxyanisole ranged from 10.28 mg/mL to 23.23 mg/mL. DPPH radical scavenging effects of control was highest among the samples. The total polyphenol and flavonoid contents were 12.72~6.37 mg tannic acid equivalence/g, and $0.98{\sim}1.56{\mu}g$ rutin equivalence/g, respectively. Initial counts of total bacteria and lactic acid bacteria were 7.20~7.57 log CFU/g, and 4.20~4.71 log CFU/g respectively, showing significant difference according treatment and fermentation (P<0.05). In the sensory evaluation, 20% kelp extract Doenjang (5.6) showed higher overall acceptability than other samples (6.5) (P<0.01). Especially, umami taste (6.1) and texture (6.4) of 20% kelp extract Doenjang were higher than those of control (P<0.05). These results suggest that Doenjang containing kelp extracts, will be good for industrial fields.

• Journal of the Korean Geographical Society
• /
• v.51 no.6
• /
• pp.779-797
• /
• 2016

A calibrated hydrological model is a useful tool for quantifying the impacts of the climate variations and land use/land cover changes on sediment load, water quality and runoff. In the rainy season each year, the Xe Bang Fai river basin is provisionally flooded because of typhoons, the frequency and intensity of which are sensitive to ongoing climate change. Severe heavy rainfall has continuously occurred in this basin area, often causing severe floods at downstream of the Xe Bang Fai river basin. The main purpose of this study is to investigate the climate change impact on river discharge using a Soil and Water Assessment Tool (SWAT) model based on future climate change scenarios. In this study, the simulation of hydrological river discharge is used by SWAT model, covering a total area of $10,064km^2$ in the central part of country. The hydrological model (baseline) is calibrated and validated for two periods: 2001-2005 and 2006-2010, respectively. The monthly simulation outcomes during the calibration and validation model are good results with $R^2$ > 0.9 and ENS > 0.9. Because of ongoing climate change, three climate models (IPSL CM5A-MR 2030, GISS E2-R-CC 2030 and GFDL CM3 2030) indicate that the rainfall in this area is likely to increase up to 10% during the summer monsoon season in the near future, year 2030. As a result of these precipitation increases, the SWAT model predicts rainy season (Jul-Aug-Sep) river discharge at the Xebangfai@bridge station will be about $800m^3/s$ larger than the present. This calibrated model is expected to contribute for preventing flood disaster risk and sustainable development of Laos

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.2
• /
• pp.40-51
• /
• 2011

Recently, the public's interest in quality of life and good design has increased, and the opportunities for their participation in space planning and the design process are expanding. However, the public still lacks understanding of the role(and importance) of space and environment and is not experienced in expressing their opinion on improving the urban environment. At this point, 'Built Environment Education for Kids' will be the key to understanding space and environment as future citizens and to developing the ability of problem-solving and expressing their opinions. This study aims to change the awareness of the public as well as experts, and to make a better urban space through comparison and analysis of domestic and foreign 'Built Environment Education.' In 27 countries around the world(more than 110 institutions), 'Built Environment Education' from childhood is being implemented. Such movements aim to make people participate in the space design and decision-making process by understanding a fundamental element of the built environment and space perception. In this study, the United States, Britain, Finland, Japan and South Korea's 'Built Environment Education' are discussed Above all, the definition, range and target of 'Built Environment Education' are discussed For each case, the purpose and effect, laws and educational processes, systems and roles, and examples of programs are analyzed. Through reviewing each attribute and their implications, a conclusion is drawn on the aspects we have to consider in laying the foundation for implementing the 'Built Environment Education' in Korea, such as consideration of the locality, organizing systematic networks and composing a pool of experts, building proper institutions, and establishing the role of the government. This case study of 'Built Environment Education' can help increase the awareness of the public and build their strength in establishing a better future space. Through the analysis of the purpose, laws, systems, and contents, this case study is expected to provide and build the foundation for an educational system and develop an appropriate program that best suits our society.

• Progress in Medical Physics
• /
• v.15 no.4
• /
• pp.202-209
• /
• 2004

Flat panel based digital radiography (DR) systems have recently become useful and important in the field of diagnostic radiology. For DRs with amorphous silicon photosensors, CsI(TI) is normally used as the scintillator, which produces visible light corresponding to the absorbed radiation energy. The visible light photons are converted into electric signal in the amorphous silicon photodiodes which constitute a two dimensional array. In order to produce good quality images, detailed behaviors of DR detectors to radiation must be studied. The relationship between air exposure and the DR outputs has been investigated in many studies. But this relationship was investigated under the condition of the fixed tube voltage. In this study, we investigated the relationship between the DR outputs and X-ray in terms of the absorbed energy in the detector rather than the air exposure using SPEC-l8, an X-ray energy spectrum model. Measured exposure was compared with calculated exposure for obtaining the inherent filtration that is a important input variable of SPEC-l8. The absorbed energy in the detector was calculated using algorithm of calculating the absorbed energy in the material and pixel values of real images under various conditions was obtained. The characteristic curve was obtained using the relationship of two parameter and the results were verified using phantoms made of water and aluminum. The pixel values of the phantom image were estimated and compared with the characteristic curve under various conditions. It was found that the relationship between the DR outputs and the absorbed energy in the detector was almost linear. In a experiment using the phantoms, the estimated pixel values agreed with the characteristic curve, although the effect of scattered photons introduced some errors. However, effect of a scattered X-ray must be studied because it was not included in the calculation algorithm. The result of this study can provide useful information about a pre-processing of digital radiography.

• Food Science and Preservation
• /
• v.19 no.3
• /
• pp.337-343
• /
• 2012

The objective of this study was to characterize three different commercial (A, B and C) and two handmade (HM-AP, atmospheric pressure; HM-RP, reduced pressure) strawberry jams in relation to soluble solids, pH, total acid, total polyphenol, anthocyanin, color values, texture properties, and sensory evaluation. The soluble solid contents varied from 62.33 to 68.33 $^{\circ}Brix$, and the pH ranged from 3.59 to 3.70. The color L and a values were the highest in the HM-RP strawberry jam (p<0.05). The total polyphenol contents of commercial jams A, B, and C were 56.10, 97.59, and 105.85 mg GAE/100 g, respectively, and those of the HM-AP and HM-RP of handmade jams were 156.13 and 189.94 mg GAE/100 g. The anthocyanin contents of A, B, and C commercial jams were 1.51, 0.95, and 0.80 mg/100 g, respectively, and those of the HM-AP and HM-RP handmade jams were 2.64 and 9.16 mg/100 g. The phenolic contents of the HM-RP jam were significantly much higher than those of the other jams. The hardness ranged from $5.67{\times}10^3$ (HM-AP jam) to $41.91{\times}10^3$ (jam B) dyne/$cm^2$, the jelly strength ranged from 40.08 (HM-AP jam) to 180.33 (jam B) dyne, and the strength ranged from 83.84 (jam C) to 302.93 (jam B) g. The sensory evaluation of the color, flavor, sweetness, sourness, viscosity and overall acceptability of the HM-RP jam showed higher values than those of the other jams. Especially, the highest value of the color score was found in the HM-RP jam. The electon donating abilities of jams A, B, and C and of the HM-AP and HM-RP jams were 44.27, 41.70, 53.06, 69.08, and 73.21%, respectively. These results indicated that the HM-RP strawberry jam prepared with reduced pressure using micro-oxygen technology was a good source of phenolic compounds, total polyphenols and anthocyanin, and had a high level of antioxidant activity.

• Korean Journal of Agricultural Science
• /
• v.2 no.1
• /
• pp.125-130
• /
• 1975

This investigation was carried out to define the cultivation state of Ginseng seedling and to study the growth of important characters by location and correlations between characters, the results obtained are summarized as follows; 1. Most of farmers culitvating ginseng seedling had not any special consideration for the improvement of soil, and they applied green manure only as basic fertilizer but they did not apply chemical fertilizer. 2. Any efforts on the improvement of ginseng seed were not found. Seed was harvested from 3 years old ginseng plant. Seedling density was 1.8 cm by 2 cm. 3. Growth of all characters showed significant differences among farms. Coefficients of variation among individual seedling plants was largest at root diameter and smallest at root length. 4. Gromth of all characters without root diameter by planted location under the shadow was poor at front row, however root diameter was shortest at back row. 5. Significant high correlatons were rocognized between root diameter and stem diameter, between leaf blade and stem diameter and between leaf blade and leaf length, but stem length were not correlated with any characters. It is noticable that negative correlations were found between stem length and root diameter, between stem length and root length and between stem length and stem diameter.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.3
• /
• pp.193-202
• /
• 2012

'Joseong', a winter forage triticale cultivar (X Triticosecale Wittmack), was developed by the breeding team at the Department of Rice and Winter Cereal Crop, NICS, RDA in 2010. The cultivar 'Joseong' was selected from the cross FAHAD_5/RHINO1R.1D 5+10 5D'5B'//FAHAD_5 by CIMMYT (Mexico) in 1992. Subsequent generations were handled in pedigree selection program at Mexico from 1993 to 1998, and a line 'CTSS92Y-A-4Y-0M-5Y-0B' was selected for earliness and good agronomic characteristics. After preliminary and advance yield test in Korea for 2 years, the line designated as a line name of 'Iksan26'. The 'Iksan26' was subsequently evaluated for earliness and forage yield in 7 different locations such as Jeju, Iksan, Cheongwon, Yesan, Naju, Daegu, and Jinju from 2008 to 2010 and finally named as 'Joseong'. The cultivar 'Joseong' has characteristics of dark green leaf, yellow culm and spike, and large grain of yellowish brown color. The heading date of cultivar 'Joseong' was April 24, which was 5 days earlier than that of check cultivar 'Shinyoung'. It showed better tolerance or resistance to lodging, wet injury, powdery mildew, and leaf rust than those of the check cultivar 'Shinyoung'. The average forage dry matter yield of cultivar 'Joseong' at milk-ripe stage was 14.5 MT $ha^{-1}$, which was lower than 16.5 MT $ha^{-1}$ of the check cultivar 'Shinyoung'. The silage quality of 'Joseong' (5.3%) was lower to the check cultivar 'Shinyoung' (6.0%) in crude protein content, while was 2.1% superior to the check cultivar 'Shinyoung' (61.9%) in TDN (total digestible nutrients). It showed 5.1 MT $ha^{-1}$ of grain yield, which was 40% higher than that of the check cultivar 'Shinyoung' (3.65 MT $ha^{-1}$). This cultivar is recommended for fall sowing crop in the area where daily minimum mean temperatures are averaged higher than $-10^{\circ}C$ in January, and as a winter crop using whole crop forage before planting rice in around Korea.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.4
• /
• pp.361-370
• /
• 2011

This study was conducted to obtain basic a information on growth characteristics, productivity, and feed values of whole crop barleys with different awn types. The field experiments were conducted on land at Iksan, Jeollabuk-do province in Korea for one year. Six barleys with three different awn types, such as Youngyang (rough), Yuyeon (hood), Youho (hood), Iksan449 (hood), Iksan456 (hood), and Iksan448 (awnless), were used in this study. Barleys were harvested on five growth stages after (DAH); 20 days after heading (20 DAH), 25 DAH, 30 DAH, 35 DAH, and 40 DAH. Heading was earlier in Yuyeon (April 22), while was later in Iksan448 (April 29). The maximum dry matter and total digestible nutrients (TDN) yields, 11.8 and 8.1 ton per ha, respectively, was recorded in Ikan456 harvested at 35~40 DAH, followed by Youngyang, Yuyeon, Iksan448, Youho and the lowest in Iksan449. They were increased significantly with advancing crop maturity. Crude protein content was the highest in Iksan448 (10.9%) and the lowest in Youho (9.7%) and that was decreased significantly with late harvest. Total digestible nutrients (TDN) and relative feed value (RFV) were the highest in Iksan448 (73.0%, 183.8, respectively) and the lowest in Iksan456 (68.0%, 135.4, respectively) and they were increased significantly with late harvest. The mean RFV evaluated by awn types was the highest in Iksan448 (183.8) of awnless, the lowest in Youho (149.5) and Iksan456 (135.4), indicated the insufficiency of hooded type barleys as good fodder use. Therefore, in this study suggest that hooded barley should improve forage productivity as well as quality.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.2
• /
• pp.80-86
• /
• 2020

This study was conducted to research on the efficacy of chemical treatment as an effective method for reducing mycotoxin in rice straw silage. As a chemical treatment method, ammonia and sodium hydroxid were treated at 4% level of rice straws contaminated with mycotoxin, and the effects of silage storage on fungal toxin reduction, fermentation quality, and fiber digestion were evaluated. Aflatoxin B₁, B₂, G₁, G₂ and fumonisin B₁, B₂ as well as deoxynivalenol were not detected in all experimental groups, and ochratoxin A and zearalenone were detected. Ochratoxin A was detected lower in the chemical treatment than control (41.23 g / kg) (p<0.05). Zearalenone showed lower results in sodium hydroxide treatment (297.44 ㎍ / kg) than control (600.33 ㎍ / kg) and ammonia treatment (376.00 ㎍ / kg) (p<0.05). The pH of rice straw silage was the lowest in ammonia treatment and the highest in sodium hydroxide treatment (p<0.05). The lactic acid contents of control and ammonia treatments were similar, but sodium hydroxide treatment was the lowest (p<0.05). Propionic acid was higher in the control than in the chemical treatments (p<0.05), and showed similar contents in the ammonia and sodium hydroxide treatment. Both the rumen microbial degradation rate of NDF and ADF showed the highest in sodium hydroxide treatment, followed by ammonia treatment, and the control showed the lowest level (p<0.05). Therefore, the results of this study are demonstrated to have a good effect on the treatment of ammonia and sodium hydroxide to reduce the mycotoxins and increase the rumen microbial degradation rate in the rice straw silage. Sodium hydroxide treatment was more effective in reducing mycotoxins and improving fiber degradation rate than ammonia treatment, but it is thought to have an inefficient effect on silage fermentation in rice straw silage.