• 대한가정학회지
• /
• 제39권12호
• /
• pp.177-188
• /
• 2001

The purpose of this study is to investigate the fitness according to drafting method of the block patterns for women in Korea. The major findings of this study are as follows: 1. According to each sensory test of the frontal view, back view, side view and silhouette Block Pattern I is the best of them in summation of the sensory tests score. Block, Pattern D and I have good shape too. However the best block Pattern D shows good score in evaluation of overall fitness and silhouette. 2. Most of block patterns, which show high scores in sensory tests, are the Compromise Method taking merits of the Proportional Method and Short Measure Method among the Pattern Drafting Methods. Box-shape patterns show low score in the sensory tests. 3. Regarding to the number of measurement, the patterns of the Compromise Method using 6-8 measurements seem to be optimal. In degree of fitness, loose fit type basic patterns are better than other patterns from a viewpoint of the total satisfaction.

• 한국가정과학회지
• /
• 제7권3호
• /
• pp.15-33
• /
• 2004

A precise understanding of the human form in static pose serves as the basis of designing clothing. When the human body is in motion, however, even an article of clothing designed to fit the human form in static pose can pull and change, thus restricting the body. In order to increase the fit of the clothing, which may be termed the second skin, its form and measurements therefore must be determined in correlation not only with the formal characteristics of the human body, in static pose but also with its functional characteristics in motion, as caused by the movements of the human body. In this study, the motion factor was selected as the primary basis for designing slacks with good fit in both static and moving states. By indentifying the areas in which lower limb movement cause significant changes in body surface lines, we suggest several application methods for designing slacks. Using unmarried female university students aged 18 - 24 as subjects, a total of 32 body surface categories (15 body surface lines and 17 body surface segment lines) were measured in one static and 9 movement poses. In particular, expansion and contraction levels and rates were measured and used in the analysis. The analysis first involved the calculation of the average measurement per body part in body surface line in static pose as well as of the average expansion and contraction levels and rates in 9 lower limb movements. Two-way MANOVA and multiple comparison analysis (Tukey) were conducted on movements and individual somatotypes regarding measurement per body part and expansion and contraction rates. Body parts whose measurements of body surface lines differed significantly in body surface line in static pose versus in movement were then identified. The results of this study are as follows. First, changes in body surface lines caused by lower limb movements were significant in all body surface lines of the lower trunk, both horizontal and vertical, with the exception of abdomen girth, midway thigh girth, ankle girth, hip length, and posterior knee girth. Second, significantly expanded 10 body surface lines in moving pose were detected and illustrated in table 4. These body parts should be studied in designing or pattern designing, especially for close-fitting pants, in using stretch fabric, and in sensory evaluation of good fit during movement.

• 대한기계학회논문집
• /
• 제7권3호
• /
• pp.335-343
• /
• 1983

Modified-Shrink-Fit(MSF) method of compound cylinder is studied to increase elastic load carrying capacity (ELCC) of pressure vessel. The autofrettage and the shrink-fit processes are used to study the MSF process. Theoretical analyses based on the Tresca yield criterion, Hencky's total strain theory and elastic linearly strain-hardening material are carried out to derive closed form solutions. Experimental results are compared with theoretical results with various diameter ratios between outer (SM45C) and inner (SM20C) bloc cylinder. For various diameter ratios, increments of ELCC have errors in strains vs. internal loading pressures between experimental and theoretical results. But experimental results show good agreements with theoretical results in reyield pressurizing state. The increments of ELCC of compound cylinder manufactured by the MSF process is proved by measuring the residual stresses.

• 한국정밀공학회지
• /
• 제22권2호
• /
• pp.139-147
• /
• 2005

The lubricant impregnated MC nylon has good frictional properties, but its mechanical strength is inferior to steel for the mechanical elements. For the tribological application Nylon as gears, sliding bearings, cam and etc, the steel shafts are fitted in pre-heated nylon cylinder by a process of interference expansion fit and bonded by induction heating method. The joint shear strength of the two materials was measured by a universal test machine. From the study, the adhesive shear strength between these two materials was affected by the factors of the interference between nylon and steel, the size of nylon cylinder, knurl of steel shaft and inducting heating conditions. The most effective jointing conditions were analyzed and decided for the practical application in the industry.

• 벤처혁신연구
• /
• 제3권2호
• /
• pp.77-93
• /
• 2020

본 연구에서는 개인-직무 적합도가 직무성과의 미치는 영향관계와, 그 관계에서 일의 의미의 조절효과, 직무열의의 매개효과를 살펴보았다. 이를 위하여 기업 조직에 근무하는 304명으로부터 설문 데이터를 수집하였고, 상관관계 분석 및 회귀분석을 사용하여 분석하였다. 연구 결과, 사실적 개인-직무 적합도와 인지된 개인-직무 적합도 간에는 유의미한 상관관계가 존재하며, 인지된 개인-직무 적합도는 직무성과를 유의하게 예측한다는 것을 알 수 있었다. 또한, 개인-직무 적합도와 직무성과의 영향도 관계에서 직무열의의 매개효과가 존재하며, 개인-직무 적합도와 직무 열의의 영향도 관계에서 일의 의미의 조절효과가 존재하였다. 본 연구는 사실적 개인-직무 적합도와 인지적 개인 -직무 적합도의 상관관계를 실증하였으며, 개인-직무 적합도는 직무열의와 같은 정서적 변인을 매개로 하여 직무성과에 영향을 미친다는 것을 밝혔다는 점에서 의의가 있다. 조직 관리자의 입장에서는 채용된 직원의 특성에 적합한 직무환경을 제공하고, 직원들이 개인-직무 적합도에 대해 어떻게 인지하는지를 관리하는 방안이 필요하며, 특히 직원들이 일을 통해 자신의 성장이 촉진되고, 공공선에 기여한다는 인식을 가질 수 있도록 지원할 필요가 있음을 시사한다.

• 한국IT서비스학회지
• /
• 제12권1호
• /
• pp.15-32
• /
• 2013

The concrete information technology (IT) has affected ways for supporting agricultural products. However, studies relating IT to agriculture in a broader sense have not been prevalent. The objective of this study is to improve agencies' effectiveness and performance in the use and application of IT through understanding the organizational fit and misfit. This research applied a multi-contingency view to Korean IT supporting agricultural promotion agencies and it evaluated the competitiveness of these agencies with reference to the correspondence of factors (Goal, Strategy, Environment, Knowledge Exchange, Task Design, and Information System) affecting their performance with organizational goals. The results reveal that organizations with good performance show better organizational fit with their organizational goal. This study contributes to the ways of efficient IT management in agricultural organizations in Korea.

• 중환자간호학회지
• /
• 제9권2호
• /
• pp.36-47
• /
• 2016

Purpose: The study examined core job characteristics and job preference to explain work performance among critical care nurses. The theoretical model was constructed based on the job characteristics model with core job characteristics as exogenous variables, and work performance and job preference as endogenous variables. Methods: A total of 228 hospital nurses participated in the study from May to September, 2015. Data were collected through structured questionnaires and analyzed using structural equation modeling. Results: The model showed a good fit to the data with $x^2/df=2.90$, goodness of fit index = .91, root mean square residual = .20, comparative fit index = .93, and incremental fit index = .93. The core job characteristics explained 64% of the variance in job preference. The core job characteristics and job preference explained 52% of the variance in work performance. Conclusions: The core job characteristics can explain the work performance among critical care nurses through job preference. Effective strategies to improve the work performance among critical care nurses should focus on the application of the core job characteristic into a productive work environment. Further studies are warranted to explore the role of job preference of critical care nurses in promoting their work performance.

• 한국통신학회논문지
• /
• 제25권10B호
• /
• pp.1648-1664
• /
• 2000

This paper proposes a real-time dynamic storage allocation algorithm QSHF(quick-segregated-half-fit) that provides various memory allocation policies. that manages a free block list per each word size for memory requests of small size good(segregated)-fit policy that manages a free list per proper range size for medium size requests and half-fit policy that manages a free list per proper range size for medium size requests and half-fit policy that manages a free list per each power of 2 size for large size requests. The proposed algorithm has the time complexit O(1) and makes us able to easily estimate the worst case execution time(WCET). This paper also suggests two algorithm that finds the proper free list for the requested memory size in predictable time and if the found list is empty then finds next available non-empty free list in fixed time. In order to confirm efficiency of the proposed algorithm we simulated the memory utilization of each memory allocation policy. The simulation result showed that each policy guarantees the constant WCET regardless of memory size but they have trade-off between memory utilization and list management overhead.

• 한국전산구조공학회논문집
• /
• 제23권3호
• /
• pp.247-254
• /
• 2010

유리섬유강화 폴리에스터(GFRP) 복합소재는 가볍고 내구성이 뛰어나 강재, 콘크리트, 나무 등과 같은 기존의 구조 재료들을 대체할 수 있는 재료로 최근 각광 받고 있다. 이러한 복합소재를 활용하기 위해 쉽게 조립할 수 있는 수직결구식 복합소재 데크를 활용한 아치가교 유형을 선행 연구에서 제안하였고 유한요소해석을 통해 검증하였다. 이 논문에서는 선행연구에서 제안된 볼트결합에 의한 복합소재 데크 조립식 아치가교의 안전성 및 사용성을 구조성능시험을 통해 검증하여 문제점을 파악하고 그 문제점을 해결하기 위해 개선된 아치가교 유형을 제안한다.

• 복식문화연구
• /
• 제14권1호
• /
• pp.40-47
• /
• 2006

Three-dimensional body scanners were used for years in the clothing manufacturing fields. The 3D body surface provide essential data to draft patterns for mass customization, virtual fit model, and computerized patternmaking systems. This research proposed the methods of drafting patterns for men's jacket by using three dimensional body scan data. Eight male subjects were scanned, the surface data was flattened. The differentials of the flattened body surface and the jacket draft were measured, and analyzed the regressions. To verify the fit of the patterns, the jacket was constructed by the regression formulae and tested by experts. The fit of the jacket were significantly improved rather than a ready-made suit especially the shoulder areas. This means that the methods that we proposed were good to improve the fit of the garments and could be used effectively to implement mass customization strategies in the apparel retail industry.