• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.836-843
• /
• 2009

The Water Glass grouting method has been applied frequently to impermeable grouting in practice. But there is raising problems which are durability decrease by passage time and environmentally adverse effect. So, Earth Natural Grouting method which uses micro cement is developed to overcomes the problems of the Water Glass grouting method. And it is displayed ground injection extent like Water Glass grouting method. For verifying impermeability of ENG, it is carried out a triaxial permeability test about manufacturing specimen of ENG, SGR method which is a presentative Water Glass grouting method. Although Coefficient of permeability, k, of SGR is measured a little high than k of ENG whose value is $a{\times}10^{-6}cm/sec$, the value of ENG belong to impermeable rage. And, k of SGR shows relatively rapid increase according to cure time due to durability decrease of water glass. Also, in-situ test result of ENG has similar value with SGR method for similar ground.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.85-89
• /
• 2012

Conventional grinding of BK7 glass will normally result in brittle fracture at the surface, generating severe sub-surface damage and poor surface finish. The precision grinding of BK7 glass in parallel grinding modes has been investigated. Grinding process, maximum chip thickness, ductile/brittle regime, surface roughness and sub-surface damage have been addressed. Special attention has been given to the condition for generating a ductile mode response on the ground surface. Experiments reveal that the level of surface roughness and depth of sub-surface damage vary differently for different condition. This study gives an indication of the strategy to follow to achieve high quality ground surfaces on brittle materials.

• Journal of Korea Multimedia Society
• /
• v.20 no.7
• /
• pp.994-1003
• /
• 2017

Ground-glass opacity nodules(GGNs) in chest CT images are associated with lung cancer, and have a different malignant rate depending on existence of solid component in the nodules. In this paper, we propose a method to classify pure GGNs and part-solid GGNs using multiview images and texture analysis in pulmonary GGNs with solid components of 5mm or smaller. We extracted 1521 features from the GGNs segmented from the chest CT images and classified the GGNs using a SVM classification model with selected features that classify pure GGNs and part-solid GGNs through a feature selection method. Our method showed 85% accuracy using the SVM classifier with the top 10 features selected in the multiview images.

• Journal of Chest Surgery
• /
• v.54 no.5
• /
• pp.333-337
• /
• 2021

The clinical significance of ground-glass nodules (GGNs) has been investigated in extensive clinical research for many years. The natural history of GGNs is known to be closely related to their size, proportion of solid components, and size progression over time. Based on these data, several guidelines for GGN management have been published worldwide. The indications for nonsurgical biopsy or surgical resection of GGNs are as follows: pure GGNs between 5 and 10 mm in size if they increase in size or show development of a solid component at follow-up, pure GGNs >10-15mm that remain stable but persistent, part-solid nodules >8 mm persisting at follow-up, or part-solid nodules with a solid component >6 mm at follow-up. Newly updated data considering geographical or racial factors and recent developments in surgical techniques may improve the surgical indications for GGNs in the near future.

• Journal of Chest Surgery
• /
• v.54 no.5
• /
• pp.342-347
• /
• 2021

Thoracic surgeons need to be aware of several important points regarding intraoperative lymph node dissection during surgery for non-small cell lung cancer with ground-glass opacities. The first point relates to the need for lymph node dissection during sublobar resection. Since even patients undergoing sublobar resection may benefit from lymph node dissection, it should be selectively performed according to adequate indications, which require further study. Second, there seems to be no difference in postoperative morbidity between systematic sampling and systematic dissection, but the survival benefit from systematic dissection remains unclear. The results of randomized controlled trials on this topic are conflicting, and their evidence is jeopardized by a high risk of bias in terms of the study design. Therefore, further randomized controlled trials with a sound design should investigate this issue. Third, more favorable survival outcomes tend to be positively associated with the number of examined lymph nodes. Minimum requirements for the number of examined lymph nodes in non-small cell lung cancer should be defined in the future. Finally, lobe-specific lymph node dissection does not have a negative prognostic impact. It should not be routinely performed, but it can be recommended in selected patients with smaller, less invasive tumors. Results from an ongoing randomized controlled trial on this topic should be awaited.

• Journal of Chest Surgery
• /
• v.54 no.5
• /
• pp.338-341
• /
• 2021

As diagnoses of small ground glass nodule (GGN)-type lung adenocarcinoma are increasing due to the increasing frequency of computed tomography (CT) screening, surgical treatment for GGN-type lung adenocarcinoma has rapidly become more common. However, the appropriate surgical extent for these lesions remains unclear; therefore, several retrospective studies have been published and prospectively randomized controlled trials are being undertaken. This article takes a closer look at each clinical study. Convincing evidence must be published on 2 issues for sublobar resection to be accepted as a standard surgical option for GGN lung adenocarcinoma. In the absence of such evidence, it is better to perform lobar resection as long as the patient has sufficient lung function. The first issue is the definition of a sufficient resection margin, and the second is whether lymph node metastasis is conclusively ruled out before surgery. An additional issue is the need for an accurate calculation of the total size and solid size on CT. Given the results of clinical studies so far, wedge resection or segmentectomy shows a good prognosis for GGNs with a total size of 2 cm or less. Therefore, sublobar resection will play a key role even in patients who can tolerate lobectomy.

• Journal of Chest Surgery
• /
• v.54 no.6
• /
• pp.494-499
• /
• 2021

Background: A recent increase in the incidental detection of ground glass nodules (GGNs) has created a need for improved diagnostic accuracy in screening for malignancies. However, surgical diagnosis remains challenging, especially via video-assisted thoracoscopic surgery (VATS). Herein, we present the efficacy of a novel electrical navigation system for perioperative percutaneous transthoracic nodule localization. Methods: Eighteen patients with GGNs who underwent electromagnetic navigated percutaneous transthoracic needle localization (ETTNL), followed by 1-stage diagnostic wedge resections via VATS between January and December 2020, were included in the analysis. Data on patient characteristics, nodules, procedures, and pathological diagnoses were collected and retrospectively reviewed. Results: Of the 18 nodules, 17 were successfully localized. Nine nodules were pure GGNs, and the remaining 9 were part-solid GGNs. The median nodule size was 9.0 mm (range, 4.0-20.0 mm); and the median depth from the visceral pleura was 5.2 mm (range, 0.0-14.4 mm). The median procedure time was 10 minutes (range, 7-20 minutes). The final pathologic results showed benign lesions in 3 cases and malignant lesions in 15 cases. Conclusion: Perioperative ETTNL appears to be an effective method for the localization of GGNs, providing guidance for a 1-stage VATS procedure.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.10a
• /
• pp.213-219
• /
• 1993

The box girder was developed using polymer concrete, box girder were made for flexural behavior evaluation. The box girder was reinforced with reinforcing steel bars and fiber glass roving cloths. Failure loads were 13.5 tons and 16.6tons for steel reinforced girder and fiber glass reinforced girder, respectively. Especially for the fiber glass reinforced girder, the shape was not changed even after failure. It is expected that application of this idea will be useful for developing under ground box, girder, utility tunnel, small stream bridge box, etc.

• Resources Recycling
• /
• v.13 no.1
• /
• pp.54-58
• /
• 2004

Wollastonite-type glass ceramics were prepared by milling and firing at various temperatures using an automobile waste glass and waste shell as starting materials. Powder mixture ground by disk-type ball mill for 3 hours was pressed into a disk. The pressed specimen was fired at $850^{\circ}C$,$950^{\circ}C$ and $1050^{\circ}C$ for 1 hour in air. From FE-SEM observation, with an increase of the firing temperature from $850^{\circ}C$ to $1050^{\circ}C$, whisker-type phase was grown to about 10 $\mu\textrm{m}$ in length. Specimen fired at $1050^{\circ}C$ showed the formation of well-crystallized whisker-type wollastonite grains and the highest compressive strength.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.2
• /
• pp.35-50
• /
• 2013

This paper discusses effects of mesh planes on signal integrity in high-speed glass ceramic packages. One of serious signal integrity issues in high-speed glass ceramic packages is high far-end (FE) noise coupling between signal interconnects. Based on signal integrity analysis, a methodology is presented for reducing far-end noise coupling between signal interconnects in high-speed glass ceramic modules. This methodology employing power/ground mesh planes with alternating spacing and a via-connected coplanar-type shield (VCS) structure is suggested to minimize far-end noise coupling between signal lines in high-speed glass ceramic packages. Optimized interconnect structure based on this methodology has demonstrated that the saturated far-end noise coupling of a typical interconnect structure in glass ceramic modules could be reduced significantly by 73.3 %.