• Structural Engineering and Mechanics
• /
• v.48 no.6
• /
• pp.791-807
• /
• 2013

Ultra High Performance Cementitious Composites with compressive strength 200MPa (UHPCC-200) is proposed for the structural design of super high hybrid wind turbine tower to gain durability, ductility and high strength design objectives. The minimal wall thickness is analyzed using basic bending and compression theory and is modified by a toque influence coefficient. Two cases of wall thickness combination of middle and bottom segment including varied ratio and constant ratio are considered within typical wall thickness dimension. Using nonlinear finite element analysis, the effects of wall thickness combinations with varied and constant ratio and prestress on the structural stress and lateral displacement are calculated and analyzed. The design limitation of the segmental wall thickness combinations is recommended.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.77-82
• /
• 1996

This paper is concerned with how to utilize kinematic redundancy to reconstruct the inverse kinematic solution which is not attainable due to hardware limitations. By analyzing the error due to hardware limitations, we are to show that the recoverability of limitation reduces to the solvability of a reconstruction equation under the feasibility condition. It will be next shown that the reconstruction equation is solvable if the configuration is not a joint-limit singularity. The reconstruction method will be proposed based on the geometrical analysis of recoverability of hardware limitations. The method has the feature that no task motion error is induced by the hardware limitations while minimizing a possible null motion error, under the recoverability assumed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.3
• /
• pp.615-622
• /
• 2007

In general, Harris detector is commonly used for finding salient points in watermarking systems using feature points. Harris detector is a kind of combined comer and edge detector which is based on neighboring image data distribution, therefore it has some limitation to find accurate salient points after watermark embedding or any kinds of digital attacks. In this paper, we have used cross reference points which use not data distribution but geometrical structure of a normalized image in order to avoid pointing error caused by the distortion of image data. After normalization, we find cross reference points and take inverse normalization of these points. Next, we construct a group of triangles using tessellation with inversely normalized cross reference points. The watermarks are affine transformed and transformed-watermarks are embedded into not normalized image but original one. Only locations of watermarks are determined on the normalized image. Therefore, we can reduce data loss of watermark which is caused by inverse normalization. As a result, we can detect watermarks with high correlation after several digital attacks.

• Journal of the Korean Vacuum Society
• /
• v.8 no.4A
• /
• pp.456-460
• /
• 1999

Experimental studies of laser micromachining on Mo diaphragm using piezo Q-switched Nd:YAZ laser have been performed. Application of miniaturized micorcolumn electron gun arrays as a potential electron beam lithography or portable mini-scanning electron microscope (SEM) application have recently extensively examined. The conventional microcolumn fabrication technique would give a limitation on the minimization of aberration, In this paper, we obtained 20~30 $\mu \textrm m$aperture of laser micromachining on Mo diaphragm using piezo Q-swithed Nd:YAG laser. The geometrical figures, such as the diameter and the preciseness of the drilled aperture are dependent upon the total energy of the laser pulse train, laser pulse width, and the diameter of laser spot in addition to the materials-dependent parameters.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.78-78
• /
• 1999

Experimental studies of laser micromachining on Mo metal using piezo Q-switched Nd:YAG laser have been performed. Miniaturized microcolumn electron gun arrays as a potential electron beam lithography or portable mini-scanning electron microscope application have recently extensively examined. For these purpose, the electro-static electron lens and deflector system called microcolumn has to be assembled. The conventional microcolumn fabrication technique would gave a limitation on the minimization of aberration. The current technique of a 1 $\mu$m misalignment would lead to ~1.3 nm coma. In order to reduce aberration, assembling the microcolumn component followed by laser drilling should be very beneficial. In this report, we will address the preliminary report of laser micromachining on Mo substrate using piezo Q-switched Nd:YAG laser. The geometrical figures, such as the diameter and the depth of the frilled aperture are dependent upon the total energy of the laser pulse train, laser pulsewidth, and the diameter of laser beam in addition to the materials-dependent parameters.

• Journal of KIBIM
• /
• v.11 no.3
• /
• pp.22-33
• /
• 2021

In order to maximize the use of BIM, all data related to individual elements in the model must be correctly assigned, and it is essential to check whether it corresponds to the IFC entity classification. However, as the BIM modeling process is performed by a large number of participants, it is difficult to achieve complete integrity. To solve this problem, studies on semantic integrity verification are being conducted to examine whether elements are correctly classified or IFC mapped in the BIM model by applying an artificial intelligence algorithm to the 2D image of each element. Existing studies had a limitation in that they could not correctly classify some elements even though the geometrical differences in the images were clear. This was found to be due to the fact that the geometrical characteristics were not properly reflected in the learning process because the range of the region to be learned in the image was not clearly defined. In this study, the CRF-RNN-based semantic segmentation was applied to increase the clarity of element region within each image, and then applied to the MVCNN algorithm to improve the classification performance. As a result of applying semantic segmentation in the MVCNN learning process to 889 data composed of a total of 8 BIM element types, the classification accuracy was found to be 0.92, which is improved by 0.06 compared to the conventional MVCNN.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1
• /
• pp.1-11
• /
• 2008

To overcome the mid frequency limitation of geometrical acoustic techniques, the phased geometrical method was suggested by introducing the phase information into the sound propagation from the source. By virtue of phase information, the phased tracing method has a definite benefit in taking the interference phenomenon at mid frequencies into account. Still, this analysis technique has suffered from difficulties in dealing with low frequency phenomena, so called, wave nature of sound. At low frequencies, diffraction at corners, edges, and obstacles can cause errors in simulating the transfer function and the impulse response. Due to the use of real valued absorption coefficient, simulated results have shown a discrepancy with measured data. Thus, incorrect phase of the reflection characteristic of a wall should be corrected. In this work, the uniform theory of diffraction was integrated into the phased beam tracing method (PBTM) and the result was compared to the ordinary PBTM. By changing the phase of the reflection coefficient, effects of phase information were investigated. Incorporating such error compensation methods, the acoustic prediction by PBTM can be further extended to low frequency range with improved accuracy in the room acoustic field.

• Korean Institute of Interior Design Journal
• /
• v.21 no.4
• /
• pp.21-30
• /
• 2012

Interior space of modern society has a request for non-functional considerations as well as a need for function. French sociologist Jean Baudrillard defined this phenomenon as a dialectical relationship between the functional system and the non-functional system in his book "The System of Objects". The main goal of interior design is the pursuit of non-functional aspects which can satisfy emotional needs of human being without ignoring functional side. This means that designer should exceed the limitation of the functional system and overcome it by his own idea and method. Under this recognition, this paper tried to understand how Shiro Kuramata and Takashi Sugimoto accomplished the overcoming successfully. Sugimoto breaks through mechanical monotony introducing the non-functional objects into the functional system. His objects have power and form of the nature. They also shows traces of manufacture and labor. They works as media transferring old life and values. Sugimoto sometimes adopts the non-functional system such as collection, so it reveals time of collecting and arrangement of various objects. In contrast to Sugimoto, Kuramata erased the form of functional object and turned over the everydayness of the functional system. Instead, aesthetical phenomena substitutes form. Having doubts about the geometrical order of functional system, he opened a discourse for its meaning and limitation. However they have something in common which works as a blueprint for establishing subject's discourse. This discourse is comprised of their own memories of scenes. These subjects' discourse institute worlds through their design works based on each methodology. From the Heideggerian point of view, the worlds offer a foundation which allows the establishment of art in interior design.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.3
• /
• pp.190-196
• /
• 2015

The estimation method of the sea wind information using the nearby land wind data have been widely used. However, it is insufficient to examine the limitation of the method based on the characteristics of the wind data. In this study, the characteristics of the wind data are analysed and compared to check the limitation of the existing conventional method. The data are observed at the same time period in the land and sea stations in Pohang coastal zone. In particular, the analysis are focused on the direction data simply overlooked in the analysis target. The method is suggested as a useful tool for the various analysis of the wind direction data. The results show that the statistical informations between the land and sea wind data are quite different though the lineal distance between stations are not large (${\fallingdotseq}3.8km$). The difference is attributed to come from the geometrical gradient and elevation difference between land and sea areas. As a consequence, the quantitative estimation error should be checked preliminarily using the land-sea monitoring data sets because the sea wind estimation using land data is essentially unacceptable.

• Steel and Composite Structures
• /
• v.3 no.2
• /
• pp.123-140
• /
• 2003

The importance of the research on moment-resistant properties of unstiffened tubular joints and the research background are introduced. The performed experimental research on the bending rigidity and capacity of the joints is reported. The emphasis is put on the discussion of the flexural behavior of the joints including sets of geometrical parameters of the joints and several loading combinations. Procedures and results of loading tests on four full size joints in planar KK and X configuration are described in details at first. Mechanical models are proposed to analyze the joint specimens. Three-dimensional nonlinear FE models are established and verified with the experimental results. By comparing the experimental data with the results of the analysis, it is reported reasonable to carry out the structural analysis under the assumption that the joint is fully rigidly connected, and their bending capacities can assure the strength of the members connected under certain limitation. Furthermore, a parametric formula for inplane bengding rigidity of T and Y type tubular joints is proposed on the basis of FE calculation and regression analysis. Compared with test results, it is shown that the parametric formula developed in this paper has good applicability.