• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.89-92
• /
• 2003

A geometrically uniform code in AWGN channel has strong symmetry properties such as a) the distance profiles form codewords On C to all other codewords are all the same, and b) all Voronoi regions of codewords in C have the same shape. Such properties make the word error probability of geometrically uniform codes be transparent to the transmitted codeword. In this paper, we extend the geometrically uniform codes in AWGN channel to the geometrical uniform codes in fading channel with multiple transmit antennas.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.7
• /
• pp.971-984
• /
• 2002

The multichannel quantum defect theory (MQDT) is reformulated into the form of the configuration mixing (CM) method using the geometrical construction of the S matrix developed for the system involving two open and one closed channels. The reformulation is done by the phase renormalization method of Giusti-Suzor and Fano. The rather unconventional short-range reactance matrix K whose diagonal elements are not zero is obtained though the Lu-Fano plot becomes symmetrical. The reformulation of MQDT yields the partial cross section formulas analogous to Fano's resonance formula, which has not easily been available in other's work.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.6
• /
• pp.601-610
• /
• 2008

This paper deals with a new geometrical surface modeling method of forebody's hull form which is fully defined by form parameters. The complex hull form in the forebody can be modeled by the combination of three parts: bare hull, bulbous bow and blending part which connects a bare hull and a bulbous bow. All these subdomain parts are characterized by each own form parameters and constructed with simple surface model. For this, we need only 2-dimensional hull form data and then the form parameters are calculated automatically from these data. Finally, the smooth hull form surfaces are generated by parametric design and fair-skinning. In the practical point of view, we show that this new method can be useful and efficient modeling tool by applying to the hull form surface modeling of Panamax container's forebody.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.6
• /
• pp.247-252
• /
• 2004

This paper proposes a matching algorithm using Voronoi diagram for rotation and translation invariant fingerprint identification. The proposed algorithm extracts geometrical structures that are derived from Voronoi diagram of a fingerprint image. Then two features, distances and angles are extracted from the geometrical structures and saved as indexing form for fingerprint matching. This matching algerian has a lower error rate than indexing based methods of old times.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.513-518
• /
• 1999

In this study, geometrical similarity conditions for drills of various diameters are discussed. The effect of geometrical similarity on the chip shape and forces of different sized conventional drills has been experimentally confirmed. Drilling tests are carried out for SM45C by using the conventional HSS drills. The torque and thrust forces are measured and compared with those chip forms. Chip shape in drilling are affected by three factors being flow angle, side and up curl of the chip. It is found that the feedrate and drill diameter are more affected than cutting speed on the chip form and cutting forces. The similarity conditions gives easily to estimate the chip shape, the thrust and the torque for drills of different diameters.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.6
• /
• pp.118-126
• /
• 2000

In this study, geometrical similarity conditions for drills of various diameters are discussed. The effect of geometrical similarity on the chip shape and forces of different sized conventional drills has been experimentally confirmed. Drilling tests are carried out for SM45C by using the conventional HSS drills. The torque and thrust forces are measured and compared with those chip forms. Chip shape in drilling are affected by three factors being flow angle, side and up curl of the chip. It is found that the feedrate and drill diameter are more affected than cutting speed on the chip form and cutting forces. The similarity conditions gives easily to estimate the chip shape, the thrust and the torque for drills of different diameters.

• IE interfaces
• /
• v.11 no.2
• /
• pp.119-124
• /
• 1998

This paper proposes a new part family classification system (IPFACS: Image Processing and Fuzzy ART based Clustering System), which incorporates image processing techniques and a modified fuzzy ART neural network algorithm. IPFACS can classify parts based on geometrical shape and manufacturing attributes, simultaneously. With a proper reduction and normalization of an image data through the image processing methods and adding method in the modified Fuzzy ART, different types of geometrical shape data and manufacturing attribute data can be simultaneously classified in the same system. IPFACS has been tested for an example set of hypothetical parts. The results show that IPFACS provides a good feasible approach to form families based on both geometrical shape and manufacturing attributes.

• Journal of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.516-521
• /
• 1985

Ethylenediamine-triacetatocobalt (III) complexes with an ammine, an ethylene-diamine, and a trimethylenediamine as the unidentate ligand were prepared, and were isolated as only one isomer for each case by the Dowex 50W-X8, cation exchange resin in $H^+$ form. The geometrical isomer of these complexes have been assigned cis-equatorial form in the three possible geometrical isomers from the elemental analysis, pH titration, IR, NMR, and electronic absorption spectrum. It was found that $[CoN_3O_3]$ system of the meridional form with multidentate ligand have the first absorption band of the largely splitting pattern, and that the diamines (ethylenediamine, trimethylenediamine) have coordinated to the central cobalt (III) ion as a unidentate ligand.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.11
• /
• pp.951-956
• /
• 2013

This paper describes techniques used to analyze the sweet spot of sound field reproduced by ear-level linear arrays of loudspeakers by geometrical approach method. Previous researches have introduced various sweet spot definitions in their own way. In general, sweet spot is defined as an area whose stereophonic sound effect is valid. Its size is affected by the geometrical arrangement of the system. In this paper, a case when plane waves are generated by linear arrays of loudspeakers in the horizontal plane is considered. So the sweet spot is defined as an area in which the listener can perceive the desired azimuth angle. Because there are many loudspeakers, impulse responses at listener's ears are in the form of pulse-train and the time-duration of the pulse-train affects the localization performance of the listener. So we calculated the maximum time duration of pulse-train by geometrical approach method and identified with the results of impulse response simulation. This paper also includes parameter analysis with respect to aperture size, so it suggests a tool for sound engineers to expect the sweet spot size and listener's sound perception.

• Journal of KIISE:Information Networking
• /
• v.31 no.3
• /
• pp.243-251
• /
• 2004

This paper proposes a digital image watermarking scheme, which is robust to geometrical attacks. The method improves image normalization-based watermarking (INW) technique that doesn't effectively deal with geometrical attacks with cropping. Image normalization is based on the moments of the image, however, in general, geometrical attacks bring the image boundary cropping and the moments are not preserved original ones. Thereafter the normalized images of before and after are not same form, i.e., the synchronization is lost. To solve the cropping problem of INW, Invariant Centroid (IC) is proposed in this paper. IC is a gravity center of a central area on a gray scale image that is invariant although an image is geometrically attacked and the only central area, which has less cropping possibility by geometrical attacks, is used for normalization. Experimental results show that the IC-based method is especially robust to geometrical attack with cropping.