• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제19권3호
• /
• pp.305-313
• /
• 2012

In this note we study Nesbitt's Inequality and modify it to make several inequalities. We prove some inequalities by using power series and Cauchy-Schwarz Inequality.

• Interaction and multiscale mechanics
• /
• 제1권3호
• /
• pp.381-396
• /
• 2008

The aerostatic instability of cable-supported bridges is studied, with emphasis placed on modeling of the geometric nonlinear effects of various components of cable-supported bridges. Two-node catenary cable elements, which are more rational than truss elements, are adopted for simulating cables with large or small sags. Aerostatic loads are expressed in terms of the mean drag, lift and pitching moment coefficients. The geometric nonlinear analysis is performed with the dead loads and wind loads applied in two stages. The critical wind velocity for aerostatic instability is obtained as the condition when the pitching angle of the bridge deck becomes unbounded. Unlike those existing in the literature, each intermediate step of the incremental-iterative procedure is clearly given and interpreted. As such, the solutions obtained for the bridges are believed to be more rational than existing ones. Comparisons and discussions are given for the examples studied.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제8권10호
• /
• pp.421-426
• /
• 2019

본 논문에서는 단백질 복합체에서 단백질 사이의 접촉 영역이 갖는 기하학적 특징을 가시화하는 방법을 제안한다. 단백질 또는 리간드가 요철이 있는 곡면으로 표현될 때, 두 곡면이 서로 접하면서 교차하지 않는 성질을 형태 상보성이라 한다. 단백질-단백질 또는 단백질-리간드 도킹 연구에서 형태 상보성과 화학적인 성질, 엔트로피 등이 접촉 영역의 발견에 중요한 역할을 한다는 것을 볼 수 있다. 일반적으로 형태 상보성이 높은 영역을 발견한 뒤, 이 영역에 속한 아미노산들의 잔기 극성 및 소수성 등을 이용하여 접촉 영역을 예측한다. 접촉 영역을 예측하기 위한 연구에서는 기존에 알려진 복합체에서 접촉 영역이 갖는 기하학적인 특징을 조사하는 작업이 필요하며, 이를 위해 기하학적인 특징을 가시화하는 작업은 필수적이다. 본 논문에서는 단백질 복합체에서 접촉 영역을 발견하고, 두 개의 단백질 각각의 접촉 면에 속한 근거리의 정점들의 기하학적인 특징을 법선 벡터 및 평균 곡률로써 가시화하는 방법을 제안한다.

• 한국지진공학회논문집
• /
• 제21권6호
• /
• pp.277-286
• /
• 2017

On September 12, 2016, Gyeongju earthquake occurred. Its local magnitude was announced to be $M_L=5.8$ by Korea Meteorological Administration (KMA). Ground motion data recorded at KMA, EMC and KERC stations was obtained from their data bases. From the data, horizontal and vertical response spectra, and V/H ratio were calculated. The horizontal spectrum was defined as geometric mean spectrum, GMRotI50. From the statistical analysis of the geometric mean spectra, a mean plus one standard deviation spectrum in lognormal distribution is obtained. Regression analysis is performed on this curve to determine the shape of spectrum including transition periods. Applying the same procedure, the shape and transition periods of vertical spectrum was obtained. These results were compared with the Korean standard design spectra, which were developed from domestic and overseas intraplate earthquake records. The response spectra of Gyeongju earthquake were found to be almost identical with the newly proposed design spectra. Even the V/H ratios showed good agreement. These results confirmed that the method adopted when developing the standard design spectra were valid and the developed design spectra were reliable.

• 한국환경보건학회지
• /
• 제36권5호
• /
• pp.351-359
• /
• 2010

The objectives of this study were to understand the characteristics of residents in industrial areas and factors affecting exposure to the Volatile Organic Compounds(VOCs : Benzene, Toluene, Xylene) as well as to assess exposure levels according to house-type, and whether residents were indoors or outdoors. This research was designed to assess the differences in exposure levels to indoor, outdoor and personal VOCs in a case group and a control group across all areas, as well as in each different area, from May to October 2007, in. 110 residents of the G, Y and H industrial areas of the Jun-nam province. The geometric mea-levels of airborne benzene for the case group 1.31part per billion(ppb) indoor, 1.29 ppb outdoor, and 1.32 ppb for personal exposure were significantly higher than for the control group 0.99, 0.87 and 0.57 ppb, respectively. The geometric mean level for toluene personal exposure across the G, Y and H areas was 5.70 ppb for the case group and 6.31 ppb for the control group. While the outdoor level was 4.27 ppb for the case group and 5.06 ppb for the control group, The indoor level for the case group was 4.78 ppb, similar to that of the control group 4.69 ppb. The geometric mean levels for airborne xylene across the G, Y and H areas were 0.16 ppb(outdoor), 0.12 ppb(personal exposure) and 0.10 ppb(indoor) for the case group, and for the control group were 0.17(personal exposure) and 0.09 ppb(indoor and outdoor). The indoor/outdoor(I/O) ratio for case group is 1.19, while that of the control group is 1.15, indicating that the indoor level was higher than the outdoor level. The interrelationship differences among the three different types of levels in the air in the G, Y and H areas are statistically significant, except for the difference between the indoor and outdoor figures for xylene. In terms of the different types of houses and energy type uesd, the geometric mean level for airborne benzene, toluene and xylene for houses were 1.61, 5.39 and 0.12 ppb, respectively. while the figures for flats were 0.67, 3.32 and 0.05 ppb, respectively. Outdoors, the levels of benzene and toluene in flats were 0.71 and 2.62 ppb, respectively. and 1.58 and 5.35 ppb in houses. For personal exposure, the house levels of benzene, toluene and xylene were all higher than for flats. Houses using oil for heating have significantly higher levels than flats, which use gas for heating.

• 한국정보통신학회논문지
• /
• 제13권3호
• /
• pp.451-457
• /
• 2009

컴퓨터그래픽스에서 다루어지는 대부분의 물체들은 메쉬 형태로 표현된다. 보다 다양한 형태로의 변형이나 현실감 있는 렌더링을 얻기 위해서는 정점에서의 올바른 법선벡터 계산이 필수적이다. 이에 대한 기존 연구들은 정점의 기하학적 특성을 단순하게 반영하는 가중치를 사용하였다. 본 논문에서는 국지적 기하학 특성을 종합적으로 반영하는 등각사상과 이웃 정점과의 상호관계를 연속적으로 표현할 수 있는 중간값 좌표계를 사용하는 방법을 제안한다. 논문에서 제시된 방법이 기존 다른 방법에 비해서 보다 정확한 법선벡터를 계산할 수 있음을 실험을 통해서 알 수 있다.

• 한국산업보건학회지
• /
• 제17권4호
• /
• pp.261-271
• /
• 2007

To provide necessary information for future environmental monitoring of storage batteries in Korea, authors analyzed environmental monitoring dataset of air lead concentration of 12 storage battery industries measured during 1989-2006. We calculated geometric mean and standard deviation with minimum and maximum value of each year dataset. Air lead concentration data were analyzed according to year of measurement, type of grid manufacturing method (grid casting type or expander type), size of industries and type of operation (casting, lead powder & pasting, assembly and others). The geometric mean and standard deviation of all lead industries for overall 18 years were $72{\mu}g/m^3$ and 3.65 with minimum of $6{\mu}g/m^3$ and maximum of $7,956{\mu}g/m^3$. The geometric mean air lead concentrations of years between 1989-1999 were above the Korean PEL($50{\mu}g/m^3$), whereas those of years after year 2000 were below the Korean PEL showing 50% of it. The geometric mean concentration of air lead was significantly lower in expander method battery industries than that of grid method battery industries and was lower in large sized battery industries than small & medium sized ones throughout the whole 18 years period. The distributions of over PEL($50{\mu}g/m^3$) were decreased by the years of environmental monitoring and those were lower in expander method battery industries than grid method battery industries. The significant reduction of mean air lead concentration during last 10 years may be induced partly due to more active environmental engineering control and new introduction of new operation in grid method battery industries, but may be also influenced by non-engineering method such as reduction of operation hours or reduction of exposure time during actual environmental measurement by industrial hygienist which is not concrete evidence, but just circumstantial evidence.

• 한국경영과학회지
• /
• 제23권4호
• /
• pp.131-140
• /
• 1998

The objective of this study is to propose a new procedure to synthesize the multi-experts priorities in AHP. If multi-experts with different expertise are involved in a AHP decision, we need some way to aggregate their opinions. AHP model used to do numerical aggregation by taking only the geometric mean or the weighting geometric mean in past. To aggregate the multi-experts priorities, In this paper. we suggest a way which Decision Maker can exclude outlier matrix from group using the concept of the Compatibility and we Introduce Delphi method to use Compatibility in AHP. A numerical example is shown to illustrate the procedure.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.175-176
• /
• 2008

Exploiting block diagonal geometric mean decomposition (BD-GMD) for the multi-user MIMO broadcast channels, each user can achieve identical received SNRs for its subchannels. Thus, equal rate modulation can be applied to each user. Using BD-GMD, we can apply an adaptive modulation to each user with the required bit error rate (BER). In this paper, we propose an adaptive modulation algorithm for the multi-user MIMO broadcast channels with BD-GMD to maximize the system throughput satisfying the required BER performance.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.392-397
• /
• 2000

Mono-disperse particles generated by a condensation particle generator are widely used to meet the experimental and industrial needs. The characteristics of particles generated by homogeneous nucleation have been studied experimentally using a laminar flow condensation particle generator. Dry nitrogen gas saturated with oleic acid vapor was cooled well below the saturation temperature causing the highly supersaturated vapor to nucleate. The dependence of GSD(Geometric Standard Deviation), GMD(Geometric Mean Diameter), and the mass concentration of particles on the temperature at the evaporator, flow rate and the temperature condition at condenser was studied. The experimental results show that the mass concentration of particles is affected by the radial temperature profile at condenser. Nucleation at the center of the condenser causes the mass concentration of particles to increase. The experimental results also show that the suppression of additional nucleation by a constant temperature condition at the condenser increases the mean diameter of particle.