• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.277-284
• /
• 1999

This study describes the influence factors related to slope failure pattern and dimension in the southern Kyounggi area. Intrusive and metamorphic rocks are distributed in the study area. Geological condition, rainfall property and slope geometry are influence on slope failure characteristics in the study we& Geological factors related to slope failure are rock type, geological structure and weathering condition. Because of deep soil (RS-CW) depth of granite region, circular failure type is major failure pattern in granite region. Almost granite slopes with circular or surface failure pattern are failed during heavy rainfall season. But typical wedge failure type related to geological structure factor is a main failure pattern of metamorphic rock slope. Additionally failure dimension is influenced by geological factors and several factors, i.e. natural slope condition, failure type, rainfall intensity and etc. failure height/width ratio and thickness/length ratio of granite slope are 0.88 and 0.23. But the ratios of metamorphic rock slope are 1.36 and 0.19.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.593-600
• /
• 2000

Most of ground investigations can be grasped geological distribution which like rock name, geological structure, soil condition, underwater condition, land slide, ground cave-in, ground collapse by geological survey. But geological survey is limited to part region geological structure, not wide region. Therefore, Image Processing Method must need to grasp wide region geological structure. The object of this research is presented analysis data of geotechnical engineering in first step investigation.

• Explosives and Blasting
• /
• v.10 no.3
• /
• pp.8-25
• /
• 1992

On the Sub- way Construction It is important to Survey in advance the Geological Structure and also to make the Engineering Geological map this paper deseribs the feature of Geological structure of Seoul Area and analyses the recently occured Rock falling acciudents. NATM Tunnelling always must be done with careful observation and measurement of the geological condition.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.253-260
• /
• 2002

Chemical weathering processes related with mineralogical characters and ground water condition are very essential engineering problems in soluble rock masses. Detailed geological mapping were performed and 8 samples were collected from the 2 formations including various rock faces to deduce the possibility of the limestone cavity formation and their mechanism. Petrological descriptions and various petro-mineralogical experiments such as XRD analysis, clay mineral analysis, absorptivity test, impurity analysis were conducted to evaluate the cavity making processes. Laboratory solubility test for rock specimen were also carried out under the strong acid (pH=1) condition. From the experimental data and geological mapping data, it is found that the formation of limestone cavities in limestones are strongly related with geological structures such as beddings, cleavages and the contents of impurities rather than CaCO$_3$contents. In case of dolomites, rock textures, grain size, amounts and types of clay minerals as well as geological structures are major controlling factors of cavity forming processes

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2007.02a
• /
• pp.58-60
• /
• 2007

The availability of Information Technology in geological and engineering geological fields is rapidly increasing in Korea. Especially GIS-based hazard mapping is the most distinctive part to predict a possibility of landslide occurrence. Integrated expert system for tunnel construction is also practically used to manage investigated or designed data and to predict un-known underground geological condition. Computer-based field data acquisition tools are also one of the typical part using information technology including GIS combined with mobile phone in Geological field.

• The Journal of Engineering Geology
• /
• v.12 no.3
• /
• pp.295-303
• /
• 2002

The stability of rock slopes is closely related to the factors such as: type of rock, development of geological structures, weathering, characteristics of rock, and the shape of the geological features. When we design the rock slope, the slope stability is determined by the discontinuity causing the circular, plane or wedge failure. The failure happens when the slope is under the unstable geological condition. But in some cases, slope failure has occurred even though the slope is under stable geological conditions. In this respect, this paper presents the plane failure conditions for domestic rock slopes through research of sites where slope failure has occurred regardless of whether or not it satisfied the stable geological conditions.

• The Journal of Engineering Geology
• /
• v.17 no.1 s.50
• /
• pp.75-87
• /
• 2007

The recognitions of geometrical characteristics and occurrence conditions are very important to evaluate the land-slides in natural terrains. In this paper, the geometrical characteristics of landslides are analyzed according to a geo-logical condition in three landslides areas. The three landslides areas are classified to the geological condition. The three landslides areas are Jangheung, Sangju and Pohang. The geology of Jangheung area, Sangju area and Pohang area is gneiss, granite, and the tertiary sedimentary rock, respectively. During a heavy rainfall of $150{\sim}588mm$ in these areas, 1,582 landslides have occurred in 1998. The geometrical characteristics according to the geological condition analyzed from the investigation of these landslides. The frequency of landslide is high exceedingly above 90% of a slope attitude, while the frequency is very low below 70%. The frequency of landslide is high exceedingly between $26^{\circ}$ and $30^{\circ}$ of slope angle, while the frequency is very low below $20^{\circ}$. The size of the landslides is ranged from several tens to several hundreds The length is ranged from 5 m to 300 m, and the width is ranged from 3 m to 50 m. Also, the depth is less than 1 m. Therefore, the landslides in these areas have small width, long length and shallow depth. The type of the landslides is changed from transitional slide at the scarp to debris flow at the low part of slope.

• The Journal of Engineering Geology
• /
• v.17 no.2 s.52
• /
• pp.205-215
• /
• 2007

In this study, the soil characteristics are analyzed using the result of various soil tests as an object of the soil layer of natural slopes in landslides areas. Also, the relationship with landslides and interrelation with each soil properties are analyzed. The landslides in three areas with different geological condition are occurred due to heavy rainfall in same time. The geology of Jangheung area, Sangju area and Pohang area is gneiss, granite, and the tertiary sedimentary rock, respectively. However soil characteristics have a little differentiation to geological condition, the soils sampled from landslide area have higher proportion of fine particle and porosity, and lower density than those from non landslide area. In case of same geological condition, landslides are occurred in the terrain slope with high permeability. The permeability is mainly influenced by the soil characteristics such as particle size distribution, porosity, particle structure, and the geological origins such as weathering, sedimentary environment. The soil layer with high internal friction angle is more stable than that with low internal friction angle in all geological condition. The permeability is mainly influenced by effective particle size, coefficient of uniformity, coefficient of gradation, porosity, density and so on. Also, those have interrelation with each factor. These interrelations are similar in all study area. Meanwhile, in proportion as the void ratio and the porosity rises the permeability increases.

• Tunnel and Underground Space
• /
• v.31 no.1
• /
• pp.1-9
• /
• 2021

Recently, the development of underground space has been accelerated with rapid urbanization, and it is significantly important for safe construction to accurately understand the geological conditions of the section when excavating rocks. In this paper, a boring alignment tracking and geological exploration system have been developed to identify the geological conditions beyond the excavation face by utilizing a MSP method that bores a large empty hole to reduce blast-induced vibration. The major advantage of the proposed exploration system is that we can obtain the ground condition of 50 m ahead of the excavation face through exploration along blast cut-holes drilled for the NATM tunnel construction. In addition, we introduce several case histories regarding the assessment of the geological conditions beyond the tunnel face by monitoring the inside of large empty holes using the proposed hole exploration system.

• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.577-587
• /
• 2007

The length of study area was about 450m, and it was shown the geological condition of distinguished change of rock by cutting slope. In order to establish a slope stability, we carried out an engineering geological investigations about rock constituent, rock structure and a direction of discontinuous plane. The study area was divided into six section considered by direction of cutting slope, height of slope and geological condition. Analysis of cutting slope stability was carried out with stereo-graphic projection method by DIPS program which was feasible of stability analysis with geometrical correlation for a direction of discontinuous plane and direction of cutting slope. From analysis of cutting slope stability considered by construction, stability and economical efficiency, the slope stability countermeasures such as a high tensile wire net, slope protection method and enhanced retaining wall were established and operated which minimized effect caused by lower end of road on a relaxation of huge rock.