• (The)Study of the Eastern Classic
• /
• no.68
• /
• pp.237-281
• /
• 2017

This research aimed at investigating Kim Gyoshin's recognition on Korean traditional ideology and harmony of Christian idea and traditional idea through the writing and diary in "Bible Joseon". Kim Gyoshin expressed positive interest in Korean traditional idea and traditional religion, and intended to localize Christian belief through communicating with them. He expressed infinite respect for national cultural asset of Buddhism, intending to research Korean Buddhism. He paid utmost attention to Confucianism among traditional ideas. He had a strong affection for learning(好學), benevolence(仁義), conscience(良心) of Confucianism as patriotic character. He calmly practiced caution and solitary(愼獨) of sincere(誠), solemnity(敬) of Confucianism through his life, however he chose Christian belief by accepting atonement belief realizing human sinful nature fundamentally inherent in human being. He personally respected Confucius and lived after the model of him, however he searched the spirit of life to renew the people from Christianity. Academically, he respected Confucius, and believed in Jesus in religion. He highly evaluated the attitude of patriot(志士), which highly regarded the academic attitude of learning(好學) and benevolence(仁義), in this regard, criticized blind and non-intellectual belief. He had an open attitude toward Korean traditional idea with no prejudice. As human individuals have their own inherent moral value, he viewed that each people would have their inherent ethnicity and mission. He considered that Korean Peninsula where contradiction and yoke of the world history are inherent is the center of East Asia that would purify injustice of the world. He viewed that Korean people had owned their original good heart[仁] even before Buddhism and Confucianism had been transmitted to the country. He determined that Korean people were good people, who received goodness from the heaven. However, while Uchimura created Japanese style Christianity by adapting Japanese knighthood to Christian idea, Kim Gyoshin lacked sharp critical mind regarding how to establish Korean style Christianity by adapting which of Korean traditional idea to Christian idea.

• Journal of agriculture & life science
• /
• v.46 no.3
• /
• pp.47-58
• /
• 2012

This study was carried out to develop assessment model for the optimal site prediction of Dendropanax morbifera, Evergreen broad-leaved trees in warm temperate zone according to climate change. It was created criterion for assessment model of the optimal site prediction by quantification method to possible analysis of quantitative and qualitative data, through study relationship between growth of tree and site environmental factors. A program of the optimal site prediction was developed using program version 3.2, an Avenue and Dialog Designer tool of ESRI as GIS(geographic information system) engine. Developed program applied to test accuracy of the optimal site prediction in study area of Wando, Jeollanam-do, having a various evergreen broad-leaved trees of warm temperate zone. In the results from analysis of the optimal site prediction on Dendropanax morbifera, the characteristics of optimal site were analyzed site environmental features with 401~500m of altitude, $15^{\circ}$ of slope, hillside of local topography, alluvium of deposit type, convex of slope type and south of aspect. The mapping area per grade of the optimal site prediction in the Dendropanax morbifera showed 1,487.2ha(25.4%) of class I, 1,020.3ha(17.4%) of class II, 2,231.8ha(38.2%) of class III and 1,110.5ha(19.0%) of class IV.

• Korean Journal of Remote Sensing
• /
• v.16 no.3
• /
• pp.281-291
• /
• 2000

In this study tree plantation planning for the plantation blocks of Eucalyptus species was constructed in order to apply to the two farms Jangada and Jamaica, where are located in the western district of the state Mato Grosso do Sul in Brazil. At first the satellite photo was analyzed for the land use classification and the forest ecosystem was classified with GIS technique, and then on the basis of this result the planting available area was accounted for the two farms. According to the request of the land owner the planting planning was established for the planting available area for 3 years. The total area for the two farms is 5,301 ha, and the planting available area is estimated to be 3,913ha(74%). The rest area is 1,388ha(26%), and should be classified to the permanent legal reserve forest area. In order to minimize the soil loss and the erosion, the planting blocks were divided according to the parallel to the contour line： for the first planing year the plantation area was divided to the 27 blocks and the total area was 1,308ha, for the second planing year the area also divided to 27 blocks(1,327.4ha) and for the third planning year 30 blocks divided (1276.5).

• Korean Journal of Remote Sensing
• /
• v.11 no.3
• /
• pp.33-47
• /
• 1995

The representation of point-observed environmental variables in Geographic Information Systems(GIS) has often been inadequate to meet the need of regional-scale ecological and environmental applications. To create a map of continuous surface that would represent more reliable spatial variations for these applications, I present three spatial estimation methods. Using a secondary variable of the proximity to coast line together with rainfall acidity data collected at the 63 acid rain monitoring stations in Korea, average rainfall acidity map was cteated using co-kriging. For comparison, two other commonly used interpolation methods (inverse distance weighting and kriging) were also applied to rainfall acidity data without reference to the secondary variable. These estimation methods were evaluated by both visual assessments of the output maps and the quantitative comparison of error measures that were obtained from cross validation. The co-kriging method produced a rainfall acidity map that showed noticeable improvement in repoducing the inherent spatial pattern as well as provided lower statistical error as compared to the methods using only the primary variable.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.1
• /
• pp.21-33
• /
• 2013

Weight of evidence model was applied for potential mapping of mountainous wetland to reduce the range of the field survey and to increase the efficiency of operations because the surveys of mountainous wetland need a lot of time and money owing to inaccessibility and extensiveness. The relationship between mountainous wetland location and related factors is expressed as a probability by Weight of evidence model. For this, the spatial database consist of slope map, curvature map, vegetation index map, wetness index map, soil drainage rating map was constructed in Yeongnam area, Korea, and weights of evidence based on the relationship between mountainous wetland location and each factor rating were calculated. As a result of correlation analysis between mountainous wetland location and each factors rating using likelihood ratio values, the probability of mountainous wetlands were increased at condition of lower slope, lower curvature, lower vegetation index value, lower wetness value, moderate soil drainage rating. Mountainous Wetland Potential Index(MWPI) was calculated by summation of the likelihood ratio and mountainous wetland potential map was constucted from GIS integration. The mountain wetland potential map was verified by comparison with the known mountainous wetland locations. The result showed the 75.48% in prediction accuracy.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_2
• /
• pp.841-850
• /
• 2019

The purpose of this study is to strengthen the capability of rapid mapping for disaster through improving the positioning accuracy of mapping and fusion of multi-sensing point cloud data derived from Unmanned Aerial Vehicles (UAVs) and disaster investigation vehicle. The positioning accuracy was evaluated for two procedures of drone mapping with Agisoft PhotoScan: 1) general geo-referencing by self-calibration, 2) proposed geo-referencing with optimized camera model by using fixed accurate Interior Orientation Parameters (IOPs) derived from indoor camera calibration test and bundle adjustment. The analysis result of positioning accuracy showed that positioning RMS error was improved 2~3 m to 0.11~0.28 m in horizontal and 2.85 m to 0.45 m in vertical accuracy, respectively. In addition, proposed data fusion approach of multi-sensing point cloud with the constraints of the height showed that the point matching error was greatly reduced under about 0.07 m. Accordingly, our proposed data fusion approach will enable us to generate effectively and timelinessly ortho-imagery and high-resolution three dimensional geographic data for national disaster management in the future.

• Journal of the Economic Geographical Society of Korea
• /
• v.22 no.3
• /
• pp.351-365
• /
• 2019

This study aims to predict the changes in population distribution in Korea by considering spatio-temporal characteristics of major migration reasons. For the purpose, we analyze the spatio-temporal characteristics of each major migration reason(such as job, family, housing, and education) and estimate the transition probability, respectively. By appling Markov chain model processes with the ChapmanKolmogorov equation based on the transition probability, we predict the changes in the population distribution for the next six years. As the results, we found that there were differences of population changes by regions, while there were geographic movements into metropolitan areas and cities in general. The methodologies and the results presented in this study can be utilized for the provision of customized planning policies. In the long run, it can be used as a basis for planning and enforcing regionally tailored policies that strengthen inflow factors and improve outflow factors based on the trends of population inflow and outflow by region by movement factors as well as identify the patterns of population inflow and outflow in each region and predict future population volatility.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.33-33
• /
• 2018

농업이 기간산업이었던 고대사회에서 수리시설(水利施設)의 축조는 농업의 성패를 가늠하는 중요한 요소로 정치 경제 사회 전반에 걸쳐 큰 영향을 미치는 국가적인 대규모 사업이었다. 이에 따라 수리시설의 축조 시기와 배경, 축조 기술과 운영, 구조, 몽리(蒙利) 효과 및 보수(補修)와 수축(修築) 등에 대한 연구는 우리의 농경(農耕)문화사를 밝히는데 중요한 관건이 된다. 관개(灌漑) 수리시설의 축조와 정비는 수전(水田) 개발과 밀접한 연관이 있다. 제방(堤防)을 축조함으로써 주변의 수전 개발을 촉진하고, 가뭄과 홍수로부터 안전하게 전답을 유지할 수 있어 수확량을 높이게 된다. 농업생산력의 향상은 대내적 체제 정비는 물론 치열한 국가 간의 경쟁에서 우위를 점하는데 필요한 경제적 배경이 된다. 이처럼 고대수리시설은 개인과 집단 나아가 국가의 생존을 뒷받침하는 근본이었지만, 과연 우리는 그 역사성과 의미에 대해 제대로 평가를 했던 것일까? 또한, 고대수리시설의 관개 및 치수(治水) 능력은 구체적으로 어느 정도였으며 근대에 비하면 어느 정도였을까? 일부 수리시설에 대해 관개면적을 추정한 경우는 있으나, 그 예도 많지 않을뿐더러 시기적인 변천 양상을 제대로 반영하고 있지 못하는 것이 현실이다. 본 연구는 고대로부터 원형을 비교적 잘 간직하고 있는 수리시설 중 경북(慶北) 영천(永川)의 청제(菁堤)를 대상으로 고고학적 역사학적 입장에서 보다는 수문학적(水文學的) 농업수리학적(農業水利學的) 관점에서 저수량(貯水量) 및 관개(灌漑) 면적에 따른 농업생산력을 살펴보았다. 지형 및 GIS (Geographic Information System) 정보를 이용하여 저수지의 규모 및 관개 면적을 추정하였으며 수문학적 해석 모형(模型)인 CAT(Catchment hydrologic cycle Assessment Tool)(김현준 등, 2012)을 이용하여 저수량 및 관개 가능량을 분석하였다. CAT은 공간 단위별로 침투(浸透), 증발(蒸發), 지하수(地下水)흐름 등의 모의(模擬)가 가능하도록 개발된 모형이다. 특히, 농업용 저수지 및 홍수방재용(洪水防災用) 저류(貯留)시설 등의 저류량(貯留量) 및 방류(放流量)에 대한 모의가 가능하다(장철희 등, 2012). 고대수리시설의 저수량 및 관개 면적에 따른 농업생산력을 공학적 수문학적으로 해석하는 연구는 과거물 관리 및 생산력의 실태를 좀 더 자세히 파악할 수 있는 토대가 될 것이며, 역사학적 자료와의 비교 분석을 통해 우리나라 고대수리시설의 역사성 및 우수성을 찾을 수 있을 것으로 판단된다.

• Geophysics and Geophysical Exploration
• /
• v.15 no.3
• /
• pp.136-143
• /
• 2012

In this case study, we present the various and consistent processing techniques for the reasonable interpretation of aeromagnetic data. In the processing stage, we especially focused on the three major respects. First, in the low latitude area, severe artifacts are occurred as a result of reduction to the pole technique. To overcome this problem, variable alternative methods were investigated. From the comparison of each technique, we concluded that energy balancing method gives more fruitful result. Second, because of limited a priori information, it is nearly impossible to employ detailed geological survey due to wide and thick spreading of soils in the survey area. So we especially investigated the new techniques such as extracting slope, curvature and aspect information mainly used in GIS field as well as conventional methods. Finally, by using the Euler deconvolution, we extracted the depth information on the magnetic anomalous body. From the synthetic analysis between depth information and previous discussed results, the detailed future survey area was proposed. We think that a series of processing techniques discussed in this study may perform an important role in the domestic and abroad resource development project as a useful guideline.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.30-36
• /
• 2008

The Spatial Image contents of Geomorphology 3-D environment is focused by the requirement and importance in the fields such as, national land development plan, telecommunication facility management, railway construction, general construction engineering, Ubiquitous city development, safety and disaster prevention engineering. The currently used DEM system using contour lines, which embodies geographic information based on the 2-D digital maps and facility information has limitation in implementation in reproducing the 3-D spatial city. Moreover, this method often neglects the altitude of the rail way infrastructure which has narrow width and long length. There it is needed to apply laser measurement technique in the spatial target object to obtain accuracy. Currently, the LiDAR data which combines the laser measurement skill and GPS has been introduced to obtain high resolution accuracy in the altitude measurement. In this paper, we tested of the railway facilities using laser surveying system, then we propose data a generation of spatial images for the optimal manage and synthesis of railway facility system in our 3-D spatial terrain information. For this object, LiDAR based height data transformed to DEM, and the realtime unification of the vector via digital image mapping and raster via exactness evaluation is transformed to make it possible to trace the model of generated 3-dimensional railway model with long distance for 3D tract model generation. As the results, We confirmed the solutions of varieties application for railway facilities management using 3-D spatial image contents.