• 제목/요약/키워드: general solution of system of difference equations

검색결과 9건 처리시간 0.029초

SOME RESULTS ON MEROMORPHIC SOLUTIONS OF Q-DIFFERENCE DIFFERENTIAL EQUATIONS

  • Lingyun Gao;Zhenguang Gao;Manli Liu
    • 대한수학회보
    • /
    • 제60권3호
    • /
    • pp.593-610
    • /
    • 2023
  • In view of Nevanlinna theory, we investigate the meromorphic solutions of q-difference differential equations and our results give the estimates about counting function and proximity function of meromorphic solutions to these equations. In addition, some interesting results are obtained for two general equations and a class of system of q-difference differential equations.

A FIFTH ORDER NUMERICAL METHOD FOR SINGULARLY PERTURBED DIFFERENTIAL-DIFFERENCE EQUATIONS WITH NEGATIVE SHIFT

  • Chakravarthy, P. Pramod;Phaneendra, K.;Reddy, Y.N.
    • Journal of applied mathematics & informatics
    • /
    • 제27권1_2호
    • /
    • pp.441-452
    • /
    • 2009
  • In this paper, a fifth order numerical method is presented for solving singularly perturbed differential-difference equations with negative shift. In recent papers the term negative shift has been using for delay. Similar boundary value problems are associated with expected first exit time problem of the membrane, potential in models for neuron and in variational problems in control theory. In the numerical treatment for such type of boundary value problems, first we use Taylor approximation to tackle terms containing small shifts which converts it to a boundary value problem for singularly perturbed differential equation. The two point boundary value problem is transformed into general first order ordinary differential equation system. A discrete approximation of a fifth order compact difference scheme is presented for the first order system and is solved using the boundary conditions. Several numerical examples are solved and compared with exact solution. It is observed that present method approximates the exact solution very well.

  • PDF

REPRESENTATION OF SOLUTIONS OF A SYSTEM OF FIVE-ORDER NONLINEAR DIFFERENCE EQUATIONS

  • BERKAL, M.;BEREHAL, K.;REZAIKI, N.
    • Journal of applied mathematics & informatics
    • /
    • 제40권3_4호
    • /
    • pp.409-431
    • /
    • 2022
  • In this paper, we deal with the existence of solutions of the following system of nonlinear rational difference equations with order five $x_{n+1}=\frac{y_{n-3}x_{n-4}}{y_n(a+by_{n-3}x_{n-4})}$, $y_{n+1}=\frac{x_{n-3}y_{n-4}}{x_n(c+dx_{n-3}y_{n-4})}$, n = 0, 1, ⋯, where parameters a, b, c and d are not executed at the same time and initial conditions x-4, x-3, x-2, x-1, x0, y-4, y-3, y-2, y-1 and y0 are non zero real numbers.

A FIFTH ORDER NUMERICAL METHOD FOR SINGULAR PERTURBATION PROBLEMS

  • Chakravarthy, P. Pramod;Phaneendra, K.;Reddy, Y.N.
    • Journal of applied mathematics & informatics
    • /
    • 제26권3_4호
    • /
    • pp.689-706
    • /
    • 2008
  • In this paper, a fifth order numerical method is presented for solving singularly perturbed two point boundary value problems with a boundary layer at one end point. The two point boundary value problem is transformed into general first order ordinary differential equation system. A discrete approximation of a fifth order compact difference scheme is presented for the first order system. An asymptotically equivalent first order equation of the original singularly perturbed two point boundary value problem is obtained from the theory of singular perturbations. It is used in the fifth order compact difference scheme to get a two term recurrence relation and is solved. Several linear and non-linear singular perturbation problems have been solved and the numerical results are presented to support the theory. It is observed that the present method approximates the exact solution very well.

  • PDF

DEVELOPMENT OF THE MULTI-DIMENSIONAL HYDRAULIC COMPONENT FOR THE BEST ESTIMATE SYSTEM ANALYSIS CODE MARS

  • Bae, Sung-Won;Chung, Bub-Dong
    • Nuclear Engineering and Technology
    • /
    • 제41권10호
    • /
    • pp.1347-1360
    • /
    • 2009
  • A multi-dimensional component for the thermal-hydraulic system analysis code, MARS, was developed for a more realistic three-dimensional analysis of nuclear systems. A three-dimensional and two-fluid model for a two-phase flow in Cartesian and cylindrical coordinates was employed. The governing equations and physical constitutive relationships were extended from those of a one-dimensional version. The numerical solution method adopted a semi-implicit and finite-difference method based on a staggered-grid mesh and a donor-cell scheme. The relevant length scale was very coarse compared to commercial computational fluid dynamics tools. Thus a simple Prandtl's mixing length turbulence model was applied to interpret the turbulent induced momentum and energy diffusivity. Non drag interfacial forces were not considered as in the general nuclear system codes. Several conceptual cases with analytic solutions were chosen and analyzed to assess the fundamental terms. RPI air-water and UPTF 7 tests were simulated and compared to the experimental data. The simulation results for the RPI air-water two-phase flow experiment showed good agreement with the measured void fraction. The simulation results for the UPTF downcomer test 7 were compared to the experiment data and the results from other multi-dimensional system codes for the ECC delivery flow.

삼중대각행렬 시스템 풀이의 빠른 GPU 구현 (Fast GPU Implementation for the Solution of Tridiagonal Matrix Systems)

  • 김영희;이성기
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제32권11_12호
    • /
    • pp.692-704
    • /
    • 2005
  • 컴퓨터 하드웨어의 급속한 발전으로 그래픽 프로세서 유닛(Graphics Processor Units : GPUs)은 굉장한 메모리 대역폭과 산술 능역을 보유하게 되어 범용 계산에 많이 활용되고 있으며, 특히 계산 집약적인 물리 기반 시뮬레이션(physics based simulation)의 GPU 구현이 활발하게 연구되고 있다. 물리 기반 시뮬레이션의 기본이 되는 미분방정식 풀이 과정에서 삼중대각행렬(tridiagonal matrix) 시스템은 유한차분(finite-difference) 근사에 의해서 자주 나타나는 선형시스템으로 물리 기반 시뮬레이션 관점에서 삼중대각행렬 시스템의 빠른 풀이는 중요한 연구 분야이다. 본 논문에서는 GPU에서 삼중대각행렬 시스템 풀이를 빠르게 구현할 수 있는 방법을 제안한다. 벡터 프로세서(vector processor) 계산에서 삼중대각행렬 시스템 풀이 방법으로 널리 사용되는 cyclic reduction 또는 odd-even reduction 알고리즘을 GPU에서 구현하였다. 본 논문에서 제안한 방법을 삼중대각행렬 시스템 풀이 방법으로 잘 알려져 있는 Thomas 방법과 GPU를 이용한 선형시스템 풀이에서 좋은 성과를 보이고 있는 conjugate gradient 방법과 비교할 때 상당한 성능 향상을 얻을 수 있었다. 또한, 열전도(heat conduction) 방정식, 이류 확산(advection-diffusion) 방정식, 얕은 물(shallow water) 방정식에 의한 물리 기반 시뮬레이션의 GPU 구현에 본 논문에서 제안한 방법을 사용하여 1024x1024 격자의 계산 영역에서 초당 35프레임 이상의 놀라운 성능을 보여주었다.

자동차 현가장치의 정적설계인자 계산을 위한 프로그램 개발에 관한 연구 (A Study on Program Development for Static Design Factor of Automotive Suspension System)

  • 김광석
    • 한국융합학회논문지
    • /
    • 제8권12호
    • /
    • pp.283-289
    • /
    • 2017
  • 본 연구에서는 자동차 현가장치의 정적설계인자를 계산하기 위한 프로그램을 개발하였다. 이를 위해 기호계산기법을 사용하여 구속방정식의 자코비언에 대한 편미분을 계산하여 자코비언의 변형률 행렬을 유도하였다. 상용프로그램에서는 자코비언의 변형률 행렬을 계산하기 위하여 유한차분법 등을 사용하기도 하지만 본 연구에서는 이를 정확하게 고려하기 위하여 기호계산기법을 사용하여 계산하였다. 계산된 구속방정식 자코비언의 변형률 행렬을 사용하기 쉽도록 모듈화해 프로그램을 구성하였다. 계산된 자코비언 행렬을 사용한 결과를 1/4차량 더블위시본 현가장치에 대한 시뮬레이션을 통해 상용프로그램의 결과와 비교하여 정확성을 검증하였다. 향후 계산된 자세정보로부터 정적설계인자를 자동으로 추출하는 모듈과 함께 이를 이용하여 가상 테스트를 수행할 수 있는 융합 모듈을 추가할 예정이다.

동력경운기의 경사지견인 및 주행특성에 관한 연구 (III)-동력경운의 경사지 견인성능- (Study on the Travel and Tractive Characteristics of the Two-Wheel Tractor on the General Slope Land(III)-Tractive Performance of Power Tiller-)

  • 송현갑;정창주
    • Journal of Biosystems Engineering
    • /
    • 제3권2호
    • /
    • pp.35-61
    • /
    • 1978
  • 동력경운깅가 일반 경사지에서 견인주행하는 경우 견인주행성능과 주행특성을 구명하기 위하여 토양의 종류 및 상태는 일정하게 하고 지면의 기하학적 조건과 견인주행속도 및 견인하중을 변수로 하여 외부동력전달계의 시점인 좌우차륜과 토양간에 발생하는 차륜구동력 및 굴름정항과 Engine에서 구동륜까지 내부전달계를 통하여 전달된 동력의 이론치와 실험치와의 부합여부를 검정하고 부가적으로 동력경운기가 경사지기계화의 동력기로써의 가능성여부와 문제점을 찾으려한다.

  • PDF

동력경운기의 경사지견인 및 주행특성에 관한 연구 (Ⅲ)-동력경운의 경사지 견인성능- (Study on the Travel and Tractive Characteristics of the Two-Wheel Tractor on the General Slope Land(Ⅲ)-Tractive Performance of Power Tiller-)

  • 송현갑;정창주
    • Journal of Biosystems Engineering
    • /
    • 제3권2호
    • /
    • pp.34-34
    • /
    • 1978
  • 동력경운깅가 일반 경사지에서 견인주행하는 경우 견인주행성능과 주행특성을 구명하기 위하여 토양의 종류 및 상태는 일정하게 하고 지면의 기하학적 조건과 견인주행속도 및 견인하중을 변수로 하여 외부동력전달계의 시점인 좌우차륜과 토양간에 발생하는 차륜구동력 및 굴름정항과 Engine에서 구동륜까지 내부전달계를 통하여 전달된 동력의 이론치와 실험치와의 부합여부를 검정하고 부가적으로 동력경운기가 경사지기계화의 동력기로써의 가능성여부와 문제점을 찾으려한다.