• Journal of the Korean Institute of Navigation
• /
• v.21 no.3
• /
• pp.39-47
• /
• 1997

Under Chinese law system, the maritime law is a special branch of the civil law. For this reason, the maritime litigation shall be governed correspondently by the civil prodecure law. However, since the maritime litigation has its own special prodecure which is different from that of general procedure, there must be some special regulations to be a supplement to the civil procedure law. In this paper, a study is made on such regulations which are "The Regulations Relating to the arrest of Ships Before Litigation" and "The Regulations Concerning the Auction of Ships Which Have Been Arrested by Maritime Court for Clearing off the Debts" The aim of this paper is to describe the basic principles established in the regulations mentioned above in order to make the people who are unfamiliar with Chinese maritime legislation to be understood about Chinese special procedure adopted in maritime litigation.maritime litigation.

• Journal of Information Science Theory and Practice
• /
• v.6 no.3
• /
• pp.37-44
• /
• 2018

An academic article is normally cited within a few years of publication, after which interest falls off as the research field moves on. However, an article is sometimes ignored for many years only to attract interest after a long period of dormancy. Such articles are called "Sleeping Beauties." A general characterization of this pattern has recently been defined and is used in this study to identify five Sleeping Beauties that were published by researchers at the University of Waterloo in the 1970s and 1980s. While a handful of studies have examined the occurrence of such Sleeping Beauties in specific fields of research or in a particular journal, none has yet identified these unusual articles in the context of the lasting impact of a university's research. This study is therefore a novel application of the latest technique for identifying Sleeping Beauties. The possibilities for using this unusual citation pattern in raising the profile of a university's research are discussed.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.467-472
• /
• 2005

Characteristics of a Modified regenerative cycle gas turbine has been investigated. In the cycle, the turbine expansion is divided into two parts and the regenerator locates between them. Two types of mechanical design are assumed: two-shaft and single-shaft. In particular, optimal pressure ratio division between the high and low pressure turbines is evaluated for the single shaft configuration. The part load analyses have been carried out with the aid of off-design models. In addition to the general fuel only control, a variable speed control is assumed as the part load operating strategy of the single shaft configuration. Obvious advantage with the alternative cycle is observed in the variable speed operation of the single shaft design.

• Korean Management Science Review
• /
• v.11 no.1
• /
• pp.73-90
• /
• 1994

Recently the recongnition of Logistics becomes important to enterpries as a means for improving their competition, but the Korea enterpries falls for far behind in management techniques for analyzing realities and problems in the Logistics compare to the advanced countries. Especially the function of inventory control which is most undeveloped in them should be improved in Korea. Inventory is very important in Logistics, but there exists trade-off between inventory level and customer in the service level. It is difficult to coordinate both the reduction in the inventory level and the enhancement in the service level. Its effective technique is a DRP system. In general, it deals with arborescent distribution network in which a given channel member has a single source of supply. This article aims to present a DRP system, and more a DRP system which is flexible and responsive in the multisourcing, multi-echelon distribution network. Related research issues are discussed. Finally, using a DRP system on logistics and the management performance. So we can help the physical distribution improvement of the Korean enterprises.

• Communications for Statistical Applications and Methods
• /
• v.16 no.6
• /
• pp.989-995
• /
• 2009

Basu et al. (1998) proposed the minimum divergence estimating method which is free from using the painful kernel density estimator. Their proposed class of density power divergences is indexed by a single parameter $\alpha$ which controls the trade-off between robustness and efficiency. In this article, (1) we introduce a new large class the minimum squared distance which includes from the minimum Hellinger distance to the minimum $L_2$ distance. We also show that under certain conditions both the minimum density power divergence estimator(MDPDE) and the minimum squared distance estimator(MSDE) are asymptotically equivalent and (2) in finite samples the MDPDE performs better than the MSDE in general but there are some cases where the MSDE performs better than the MDPDE when estimating a location parameter or a proportion of mixed distributions.

• The Korean Journal of Applied Statistics
• /
• v.22 no.3
• /
• pp.627-634
• /
• 2009

Recently, the general contour Monte Carlo has been proposed by Liang (2004) as a space annealing version(ACMC) for optimization problems. The algorithm can be applied successfully to determine the ground configurations for the prediction of protein folding. In this approach, we use the distances between the consecutive $C_{\alpha}$ atoms along the peptide chain and the mapping sequences between the 20-letter amino acids and a coarse-grained three-letter code. The algorithm was tested on the real proteins. The comparison showed that the algorithm made a significant improvement over the simulated annealing(SA) and the Metropolis Monte Carlo method in determining the ground configurations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.2C
• /
• pp.141-146
• /
• 2003

In this paper, we propose an adaptive search range decision algorithm for motion vector estimation in video coding. The performance of general motion estimation method in video coding mechanism is evaluated with respect to the motion vector accuracy and the complexity, which is trade-off. The proposed algorithm that plays as a role of pre-processing for motion vector estimation determines the motion search range by the local statistics of motion vector of neighboring blocks, resulting in more than 60(%) reduction of the computational cost without the loss of visual quality. Experimental results show the capability of the proposed algorithm.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.396-401
• /
• 2006

Dynamic behaviors of the impact damper are studied experimentally and numerically. In order to investigate wide range of excitation frequencies and amplitudes, a simple but high amplifying and bias-free experimental setup is designed. Experiments focused on the harsh operation condition demonstrate Accelerated mass loading which not only deteriorates the performance of the impact damper but also involves the structural resonance which should be avoided for the stability of the system. In the previous studies, instability or deterioration of the performance was reported for the off resonance frequency region. But this paper shows that the performance deterioration and structural resonances can be predicted. Using finite element modeling and analysis, accurate system parameters were derived and used for the numerical modeling employing the conservation of the momentum. Numerical study of the transient responses using 4th-order Runge-Kutta method demonstrates general performance of the system, and shows that accelerated mass loading phenomenon is deeply related with the vibration amplitudes and the mass of the auxiliary system.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.2
• /
• pp.58-63
• /
• 2008

This paper describes aerodynamic performance enhancement of cycloidal rotor according to the blade pivot point movement and the blade preset angle adjustment. Cycloidal blade system which consists of several blades rotating about an axis in parallel direction and changing its pitch angle periodically, is a propulsion mechanism of a new concept vertical take off and landing aircraft, cyclocopter. Based on the designed geometry of cyclocopter, numerical analysis was carried out by a general purpose commercial CFD program, STAR-CD. According to tills analysis, the efficiency of cycloidal rotor could be improved more than 15% by the introduced methods.

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.390-396
• /
• 1993

When a one-dimensional telecentric paraxial holographic kinoform is used as a Fourier transform lens, we analyzed three surface-relief structures, i.e., plano-convex, convex-plano and biconvex shapes, employing exact raytracing method based on Snell's law. For the kinoform of E/8 and focal length of 15 mm, the number of zones, the thickness, and the slope of parabolic surfaces are varied by changing the refractive indicies of kinoform material and surrounding medium. It is found that biconvex shape gives the best results in general, although off-axis performance degrades in all cases as the slope of parabolic surfaces increases.