• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.3
• /
• pp.213-220
• /
• 2000

The method of photoelasticity allows one to obtain principal stress differences and principal stress directions in a photoelastic model. In the classical approach, the photoelastic parameters are measured manually point by point. The previous methods require much time and skill in the identification and measurement of photoelastic data. Fringe phase shifting method has been recently developed and widely used to measure and analyze fringe data in photo-mechanics. This paper presents the test results of photoelastic fringe phase shifting technique for the stress analysis of a circular disk under compression and an edge-cracked plate subjected to tensile load. The technique used here requires four phase stepped photoelastic images obtained from a circular polariscope by rotating the analyzer at $0^{\circ}$, $45^{\circ}$, $90^{\circ}$ and $135^{\circ}$. Experimental results are compared with those or FEM. Good agreement between the results can be observed. However, some error may be included if the technique is used to general direction which is not parallel to isoclinic fringe.

• 한국해양학회지
• /
• v.26 no.1
• /
• pp.59-66
• /
• 1991

Laboratory studies were carried out to measure the sound velocity (V/SUB p/) and quality factor (Q/SUB p/, inverse attenuation) in the horizontal (H) and vertical (V) direction on the core sampled sediment of deep-sea basin (1,850 meter water depth), East Sea of Korea (Sea of Japan). Sampled core was about 250 cm long and 500 kHz ultrasonic p-wave transducer was used for a sound soured. V/SUB p/ varies from 1,480 m/sec to 1,500 m/sec, it is not clear which direction is faster, V/SUB PH/ or V/SUB pv/, within${\pm}$ 1.0% anisotropy (A/SUB p/). It is thought because the core sediment facies is highly (or slightly) bioturbated homogeneous mud with very high porosity (more than 80%). The general trend of Q/SUB p/ is decreasing 10 to 5 with the buried depth, it is strongly affected by the variation of sediment texture (increasing silt, decreasing clay) with increasing of CaCO$_3$ and organic matter content, But Q/SUB PH/ is jumping up to 14.9 near the bottom of core sediment as including volcanic ash richly. The relationship between V/SUB PH/ and Q/SUB PH/ shows the mirror image nearly, it is interpreted that not only the geotechnical properties and texture but also sea-water characteristics (high Q/SUB p/, low V/SUB p/) according to rich water content affect strongly in the upper part of the unconsolidated deep-sea basin sediment.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.6 no.2
• /
• pp.103-109
• /
• 2004

This study attempted to investigate the plasticity of Korean paper expressed in contemporary fashion after general inquiry into Korean paper and examine the aesthetic beauty of fashion design using Korean paper. It used the literature review and empirical data analysis together. Korea-paper fashion design, the object of actual investigation, was for Korean-paper fashion from the 1990s to the present. As a result of analysis, the following findings were obtained: First, the natural, warm and soft texture seen as pureness in Korean paper enables us to elicit naturalness from liberalness. In addition, Korean paper not only has the tough characteristic of its material but also has the natural characteristic of abandoning its original nature and complying and adhering to its a given nature. Korean-paper fashion design, using this natural beauty and frank nature, bears the pure image of excluding decoration. Second, the overlapping of the surface on the surface expressed in Korean-paper fashion design forms one space with the sense of depth because of its transparency and expresses temporality through repetition. And the work of folding it with other materials and pasting them up with together demonstrates the effect of reflection because its original transparency. This effect is the specificity created in the collage technique using Korean paper and is the advantage of coming to obtain a wider freedom of expression. Korean-paper fashion design expresses transparency using this repetition and overlapping, Third, Korean paper has the simple rather than luxurious aspect. Owing to this nature, fashion design looks as if there were the greed inherent behind the work made from Korean paper though the complex technique applied to it. And it expresses the restraint of Korean paper using its original white color, the exclusion of decoration and simple design. Fourth, Korean paper is more likely to be changed by the outside influence because of formation. It has its peculiar aesthetic value and original artistry to an extent that it is regarded as one artistic work. The quality and texture of Korean paper diversely vary according to the artist's working process. Like this, Korean paper is easily fused into some object without exclusivity though it may be added to it. Korean-paper fashion design has the beauty of creation that is to create a new world because Korean paper is fused into another material due to its soft nature.

• Korean journal of communication and information
• /
• v.35
• /
• pp.292-328
• /
• 2006

This study examined Korean Public Relations trend and social acceptance in 1960s. It centers on the acceptance conditions of PR concept, corporate PR and governmental PR. It analyzed PR recognition and practical activities of the general corporations, financial institutions and public corporations in dealing with corporate PR. It also analyzed Korean governmental PR through examining the structure of governmental PR system, PR activities in rural communities and the police. In those days, PR concept had been misused to no small degree and not been accepted correctly that the necessity to let people know PR in its proper meaning was raised. Laying emphasis upon the technical side, corporate PR activities had centered on publicity. Especially, at that time, the banks, the insurance companies and the public corporations had perceived the importance of PR and implemented a set of PR activities. It can be said that a special feature in government PR in 1960s lies in the expansion of the public information system and reinforcement of PR policies. Also, PR in rural communities had been doing to give information relating to agriculture technique and to improve the living conditions of the farm area. The importance of PR in police had been on the side of promoting relations with people and improving treatment of the people by policeman.

• 대한공업교육학회지
• /
• v.35 no.2
• /
• pp.25-42
• /
• 2010

This research aims to understand how students of technical high schools view 'engineering' as well as to identify the main elements that contribute to the perception on 'engineering.' The research targets are 695 senior students of technical high schools nationwide. The researcher developed the measuring tool for the experiment by referencing the adjective value criteria utilized in the semantic difference method developed by Osgood (1957). There were a grand total of 30 criteria following the preliminary studies. The results of the research are as follows. Firstly, the average value of the overall perception of technical high school students on 'engineering' is 4.27 points. This value just exceeds the standard (4 points). Secondly, when examining the general tendency it can be noticed that there is a sense of stigma that although 'engineering' is significant and valuable it is a field that is overly difficult, complex and even dangerous. Thirdly, 6 main elements that influence the perception on 'engineering' were extracted as results of the factor analysis. The first element is practicality; the second element is emotions; the third element is aesthetics; the fourth is simplicity; the fifth is responsibility; and finally the sixth element is assertiveness. Fourthly, when comparing the average values of the perception on 'engineering' by region, it was seen that there existed a difference on the perception towards 'engineering' based on differing regions.

• Archives of design research
• /
• no.18
• /
• pp.113-121
• /
• 1996

Persuasion is one of the attractive channels to enhance the relation between markerters and consumers and deliver the true communication on products to the consumers. This arctic tried to examine the symbolic meaning system as a way of maximizing the visual communicational effect of persuasion, the efforts of marketers who are trying to utilize the psychology of the mass that consume the symbol rather than products and the symbol system as a mean of propaganda were analyzed as well. People in modern age, in general, place more value on the emotional assoessibility than the efficiency of the product, As a result, the ways of expression of propaganda approaching the mass are in the process of gradual change, which was another theme this article tried to explore. Ames sied that the human preoeption has a tendency to perceive things in some organized pattern, which can be applied to even untransparable and meaningless image. Human beings don't perceive what there is but what, thery believe there to be, and his peroeption are channelized by the opportunity of the past, his peroeption are channelized by the opportunity of the past, his experience of the environment, and the history of learning. To say another word, people not only recognize the objective form but also accept the inside meaning of the visual object. Their reponse to the visual object, therefore, include personal cognition, judgment, and attitued. The communication in visual design reveals the culture, society, and art in a complex symbol, and make synthetic cultural interpretation possible. It's pretty attractive, effective, and reasonable method to use symbolic meaning system as a way of persuasion. It is because communication means whole process from receiving and delivering the information and message to making common meaning system, to measuring the effect of the behavior change.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.5
• /
• pp.231-240
• /
• 2015

Medical imagery require to protect the privacy with preserving the quality of the original contents. Therefore, reversible watermarking is a solution for this purpose. Previous researches have focused on general imagery and achieved high capacity and high quality. However, they raise a distortion over entire image and hence are not applicable to medical imagery which require to preserve the quality of the objects. In this paper, we propose a novel reversible watermarking for medical imagery, which preserve the quality of the objects and achieves high capacity. First, object and background region is segmented and then predicted error histogram-based reversible watermarking is applied for each region. For the efficient watermark embedding with small distortion in the object region, the embedding level at object region is set as low while the embedding level at background region is set as high. In experiments, the proposed algorithm is compared with the previous predicted error histogram-based algorithm in aspects of embedding capacity and perceptual quality. Results support that the proposed algorithm performs well over the previous algorithm.

• Progress in Medical Physics
• /
• v.23 no.3
• /
• pp.162-168
• /
• 2012

In proton therapy, in vivo dose verification is one of the most important parts to fully utilize characteristics of proton dose distribution concentrating high dose with steep gradient and guarantee the patient safety. Currently, in order to image the proton dose distribution, a prompt gamma distribution detection system, which consists of an array of multiple CsI(Tl) scintillation detectors in the vertical direction, a collimator, and a multi-channel DAQ system is under development. In the present study, the optimal design of prompt gamma distribution detection system was studied by Monte Carlo simulations using the MCNPX code. For effective measurement of high-energy prompt gammas with enough imaging resolution, the dimensions of the CsI(Tl) scintillator was determined to be $6{\times}6{\times}50mm^3$. In order to maximize the detection efficiency for prompt gammas while minimizing the contribution of background gammas generated by neutron captures, the hole size and the length of the collimator were optimized as $6{\times}6mm^2$ and 150 mm, respectively. Finally, the performance of the detection system optimized in the present study was predicted by Monte Carlo simulations for a 150 MeV proton beam. Our result shows that the detection system in the optimal dimensions can effectively measure the 2D prompt gamma distribution and determine the beam range within 1 mm errors for 150 MeV proton beam.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.12 s.159
• /
• pp.1737-1746
• /
• 2006

The purpose of this study is to present a concrete image of the ideal beauty as shown in era preceding 1945 that effects the shaping of our aesthetic values; by analyzing its characteristics through the covers of women's magazines of that period, this research aims to promote the understanding of beauty of the human body. The scope of my research extends throughout the collection of women's magazines stored in the National Library and the Korea Magazine Information Center. The gathered research materials are: 5 kinds of Shin-Yeo-Sung (신여성), 51 kinds Yeo-Sung(여성) and 30 kinds of Ga-Jung-Ji-Woo(가정지우). The result of the research could be summarized as the followings. Before the 1920's in response to the violent opening, there was a trend of sticking to the traditional standard. In the 1920's, the prevalent images of women were meek and fragile. Japanese standard of beauty was explicitly indicated. In the 1930s, as Western movies started to be shown to the general public, western features were idealized and furthermore intelligence was required as a further condition. In the 1940s, preparation of the war led to encouragement of images of motherhood and natural beauty, and resistant to this trend led to pseudoclassicism.

• Economic and Environmental Geology
• /
• v.28 no.3
• /
• pp.199-211
• /
• 1995

The deep sea camera system could render it possible to obtain the detailed information of the nodule distribution, but difficult to estimate nodule abundance quantitatively. In order to estimate nodule abundance quantitatively from deep seabed photographs, the nodule abundance equation was derived from the box core data obtained in KODOS area(long.: $154^{\circ}{\sim}151^{\circ}W$, lat.: $9^{\circ}{\sim}12^{\circ}N$) during two survey cruises carried out in 1989 and 1990. The regression equation derived by considering extent of burial of nodule to Handa's equation compensates for the abundance error attributable to partial burial of some nodules by sediments. An average long axis and average extent of burial of nodules in photographed area are determined according to the surface textures of nodules, and nodule coverage is calculated by the image analysis method. Average nodule abundance estimated from seabed photographs by using the equation is approximately 92% of the actual average abundance in KODOS area. The measured sampling points by box core or free fall grab are in general very sparse and hence nodule abundance distribution should be interpolated and extrapolated from measured data to uncharacterized areas. The another goal of this study is to depict continuous distribution of nodule abundance in KODOS area by using PC-version of geostatistical model in which several stages are systematically proceeded. Geostatistics was used to analyse spatial structure and distribution of regionalized variable(nodule abundance) within sets of real data. In order to investigate the spatial structure of nodule abundance in KODOS area, experimental variograms were calculated and fitted to a spherical models in isotropy and anisotropy, respectively. The spherical structure models were used to map out distribution of the nodule abundance for isotropic and anisotropic models by using the kriging method. The result from anisotropic model is much more reliable than one of isotropic model. Distribution map of nodule abundance produced by PC-version of geostatistical model indicates that approximately 40% of KODOS area is considered to be promising area(nodule abundance > $5kg/m^2$) for mining in case of anisotropy.