• International Journal of Control, Automation, and Systems
• /
• 제1권1호
• /
• pp.54-67
• /
• 2003

In this paper, a novel estimation technique for a robust adaptive control scheme is presented for a class of uncertain nonlinear systems with a general set of uncertainty. For a class of introduced more extended semi-strict feedback forms which generalize the systems studied in recent years, a novel estimation technique is proposed to estimate the states of the fully nonlinear unmodeled dynamics without stringent conditions. With the introduction of powerful functions, the estimation error can be tuned to a desired small region around the origin via the estimator parameters. In addition, with some effective functions, a modified adaptive backstepping for dynamic uncertainties is presented to drive the output to an arbitrarily small region around the origin by an appropriate choice of the design parameters. With our proposed schemes, we can remove or relax the assumptions of the existing results.

• Clean Technology
• /
• 제6권1호
• /
• pp.1-6
• /
• 2000

In the Korean manufacturing industries, it becomes a common practice to carry both design activities and production planning activities concurrently. We should help product design engineers to apply environmental techniques in the design phase. General design engineers are busy enough to provide new technical features and to reduce the product cost. Professionals in the clean technology field should assist the product design engineers by providing the data basis of environmental specifications and appropriate solutions for each product group. This data basis should be easily accessible through internet or other forms appropriate for the personnel computers.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.410-415
• /
• 2008

This paper presents review on human comfort criteria in major codes and standards for tall buildings. In general, human comfort criteria of tall buildings have been used by magnitude of wind-induced acceleration response. Two different indexes in determination of the magnitude have been used: the peak value which occurs during a period of time and the rms value averaged over this same period. These distinctive acceleration indexes are discussed in detail and each criterion is reviewed and compared. The distinctions arisen because of the different wave forms, or acceleration signatures are addressed. It is described that which index of acceleration should be adopted in establishment of Korean human comfort criteria. In addition, some arguments from a technical standpoint that favor the use of each index are presented.

• Journal of the Chungcheong Mathematical Society
• /
• 제28권1호
• /
• pp.119-125
• /
• 2015

We find a necessary and sufficient condition for which a point star-configuration in $\mathbb{P}^n$ has generic Hilbert function. More precisely, a point star-configuration in $\mathbb{P}^n$ defined by general forms of degrees $d_1,{\ldots},d_s$ with $3{\leq}n{\leq}s$ has generic Hilbert function if and only if $d_1={\cdots}=d_{s-1}=1$ and $d_s=1,2$. Otherwise, the Hilbert function of a point star-configuration in $\mathbb{P}^n$ is NEVER generic.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.84-87
• /
• 2009

Electrowetting is a versatile tool to handle tiny droplets and forms a backbone of digital microfluidics. Numerical analysis is necessary to fully understand the dynamics of electrowetting, especially in designing electrowetting-based devices, such as liquid lenses and reflective displays. We developed a numerical method to analyze the general contact-line problems, incorporating dynamic contact angle models. The method is based on the conservative level set method to capture the interface of two fluids without loss of mass. We applied the method to the analysis of spreading process of a sessile droplet for step input voltages and oscillation of the droplet for alternating input voltages in electrowetting. The result was compared with experimental data. It is shown that contact line friction significantly affects the contact line motion and the oscillation amplitude. The pinning process of contact line was well represented by including the hysteresis effect in the contact angle models.

• The Journal of the Korean dental association
• /
• 제50권11호
• /
• pp.670-676
• /
• 2012

Distraction osteogenesis and orthognathic surgery are the widely used surgical methods for treating hemifacial microsomia and cleft lip and palate, the representative forms of congenital deformity. Distraction osteogenesis is an outstanding treatment of choice when more traction is needed than what can be achieved by general orthognathic surgery. However, the stability of distraction osteogenesis has not yet been established, and in most of the cases, additional orthognathic surgery is mandatory. Moreover, the difficulty in precise control of the traction directions is another disadvantage of distraction osteogenesis. Therefore, it would be desirable not to conduct distraction osteogenesis when the patient is suitable for an orthognathic surgery. Also, distraction osteogenesis should be recognized as an accessorial method of treatment, and be used restrictively.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제11권1호
• /
• pp.1-7
• /
• 2011

Most of expert systems use the text-oriented knowledge bases. However, knowledge management using the knowledge bases is considered as a huge burden to the knowledge workers because it includes some troublesome works. It includes chasing and/or checking activities on Consistency, Redundancy, Circulation, and Refinement of the knowledge. In those cases, we consider that they could reduce the burdens by using relational database management systems-based knowledge management infrastructure and convert the knowledge into one of easy forms human can understand. Furthermore they could concentrate on the knowledge itself with the support of the systems. To meet the expectations, in this study, we have tried to develop a general-purposed knowledge conversion tool for expert systems. Especially, this study is focused on the knowledge conversions among text-oriented knowledge base, relational database knowledge base, and decision tree.

• Progress in Superconductivity and Cryogenics
• /
• 제5권1호
• /
• pp.133-135
• /
• 2003

Cryogenic systems are requirement for the operation of HTS power cables. In general, HTS power cables require temperature below 77K, a temperature that can be achieved from the liquid nitrogen at latm or sub-cooled LN2 above latm. HTS power cable needs sufficient refrigeration to overcome its low temperature heat loading. This loading typically cones in two forms : (1) heat leaks from the surroundings and (2) internal heat generation. This paper explains the cooling test system of 10m HTS power cable. This system is composed of storage dewar, auto fill system, core cryostat and cold-box. Storage dewar is a LN2 storage tank and auto fill system is a LN2 supply device to the sub-cooler, Core cryostat is a LN2 flow line. Cold box is a control unit of temperature and flow rate. It is composed of control valve, flow meter, sub-cooler and circulation pump, etc..

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.287-289
• /
• 2012

The building construction industry of Korea was going through difficulties in improving productivity and competitiveness in international market. Therefore we expected to see the improvement in productivity by applying six-sigma based approach to general reinforced concrete construction work. As a result of applying DMAIC method, one of 6 sigma tools, we found that the most effective inspection items are 'Gap of forms' and 'status of clean'. We could see from this case study that the percentage of additional work days has decreased to 37.7% as a result of applying six-sigma based approach to reinforced concrete construction.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제3권4호
• /
• pp.143-148
• /
• 1983

A general numerical procedure for the time dependent analysis of concrete structures due to the effects of creep, shrinkage, aging of concrete and temperature variations is presented. Creep is represented by a superposition integral, and is considered as dependent on concrete age and temperature. An efficient numerical formulation of creep is possible through the use of a special exponential form of specific creep function which forms the kernel function of the superposition integral. The accuracy of this method is demonstrated by a numerical example.