• Polymer(Korea)
• /
• v.33 no.6
• /
• pp.551-554
• /
• 2009

Poly (vinyl alcohol) (PVA) and carboxymethyl cellulose (CMC) have received increasing attention in biomedical and biochemical applications because of their properties such as being water-soluble and biocompatible. In this study, a PVA/CMC hydrogel applicable to artificial cartilage was prepared by a freezing-thawing technique and a gamma-ray irradiation. The solid concentration of PVA was 7 wt% and the concentration of CMC was 4 wt%. The freezing/thawing process was repeated twice and the dose of gamma-ray irradiated was 30 kGy. Results of gelation before and after gamma-ray irradiation were similar, but the swelling degree decreased and compressive strength increased. The cytotoxicity was investigated with CCK-8 assay.

• Korean Journal of Food Science and Technology
• /
• v.11 no.2
• /
• pp.131-137
• /
• 1979

The effect of CA storage on the fresh ginseng roots were investigated. The quality of red ginseng prepared from the roots of CA storages were also evaluated and following results were abtained. 1. Fresh ginseng roots stored at controlled atmosphere showed normal appearances for as long as 6 months, while they were contaminated with fungi in 3 months when stored in the refrigerator. 2. The weights of fresh ginseng roots were reduced for 180 days to 9% and $4{\sim}5%$ in cold storage and CA storage, respectively. Those of CA storage were higher than cold storage in their hardness. 3. Bitterness of the fresh ginseng root was generally decreased as it was stored long. The decrease in bitterness of CA group was less than cold-storage group. 4. Respiration of CA group was lower than that of cold-storage group for whole storage periods. 5. Red ginseng perpared from the fresh roots stored for 180 days was incomplete in gelation and its husk was easily detached. 6. Total saponins of the red ginseng made from the fresh ginseng of CA storage was greatly reduced as compared to that prepared commonly.

• Korean Journal of Materials Research
• /
• v.11 no.6
• /
• pp.465-471
• /
• 2001

The effect of sintering condition on the mechanical properties and leachability of polydispersed ceramic core body made by gel-casting process in aqueous medium have been investigated. The polydispersed ceramic slip that has low viscosity($\leq$1000cP, at 1000cP (at $50sec^{-1}$ ) and high solid loading(50vo1%) was obtained. The green bodies were fabricated through casting and gelation at room temperature followed by drying at $25^{\circ}C$for 48hrs under relative humidity of 80%. Crack-free green body was successfully fabricated through the above process. The strength at room temperature, apparent bulk density, and shrinkage of the ceramic core body increased propotionally with increasing sintering temperature(1100~150$0^{\circ}C$). However, porosity of the ceramic core body showed relatively low vague. Leaching rate of sintered core body increased with increasing porosity of the sintered body, and was significantly dependent upon the concentration of alkali caustic solution at the same leaching temperature.

• Polymer(Korea)
• /
• v.28 no.3
• /
• pp.211-217
• /
• 2004

The sol to gel transition of aqueous solution of block copolymers consisting of methoxy poly (ethylene glycol) (MPEG) and biodegradable polyesters such as $\varepsilon$-caprolactone and L-lactide was investigated as a function of temperature. MPEG-PCL was prepared by ring opening polymerization of $\varepsilon$-caprolactone in the presence of HClㆍEt$_2$O as monomer activator at room temperature. Also, MPEG-PLLA was prepared by ring opening polymerization of L-lactide in the presence of stannous octoate at 115$^{\circ}C$. The properties of block copolymers were investigated by $^1$H-NMR, IR, and GPC as well as the observation of thermo sensitive phase transition in aqueous solution. As the hydrophobic block length increased, the sol to gel transition temperature increased and curve of that steepen to lower concentration. To confirm the gel formation at body temperature, we observed the formation of gel in the mice body after injection of 20 wt% aqueous solution of each block copolymer. After surging, we investigated the gelation in mice. The results obtained in this study confirmed the feasibility as biomaterials of injectable implantation for controlled release of drug and protein delivery.

• Korean Journal of Materials Research
• /
• v.22 no.7
• /
• pp.346-351
• /
• 2012

$Li_{1+x}Al_xTi_{2-x}(PO_4)_3$(LATP) is a promising solid electrolyte for all-solid-state Li ion batteries. In this study, LATP is prepared through a sol-gel method using relatively the inexpensive reagents $TiCl_4$. The thermal behavior, structural characteristics, fractured surface morphology, ion conductivity, and activation energy of the LATP sintered bodies are investigated by TG-DTA, X-ray diffraction, FE-SEM, and by an impedance method. A gelation powder was calcined at $500^{\circ}C$. A single crystalline phase of the $LiTi_2(PO_4)_3$(LTP) system was obtained at a calcination temperature above $650^{\circ}C$. The obtained powder was pelletized and sintered at $900^{\circ}C$ and $1000^{\circ}C$. The LTP sintered at $900{\sim}1000^{\circ}C$ for 6 h had a relatively low apparent density of 75~80%. The LATP(x = 0.3) pellet sintered at $900^{\circ}C$ for 6 h was denser than those sintered under other conditions and showed the highest ion conductivity of $4.50{\times}10^{-5}$ S/cm at room temperature. However, the ion conductivity of LATP (x = 0.3) sintered at $1000^{\circ}C$ decreased to $1.81{\times}10^{-5}$ S/cm, leading to Li volatilization and abnormal grain growth. For LATP sintered at $900^{\circ}C$ for 6 h, x = 0.3 shows the lowest activation energy of 0.42 eV in the temperature range of room temperature to $300^{\circ}C$.

• Journal of Embryo Transfer
• /
• v.32 no.3
• /
• pp.87-94
• /
• 2017

Tissue engineering (TE) has been developed to create functional organs and tissue by combining 3D matrix and cells in vitro. Vascularization and angiogenesis are utmost important for supply of nutrients and oxygen in tissue engineered organs. The present study was performed to isolate and characterize primary endothelial cells (EC) from aorta of alpha 1, 3-enzyme galactosyltransferase knock out (GalT KO) pig, to minimize immune rejection and analyze body immune system for future xenotransplantation studies. Isolation of primary EC from aorta were performed by incubation with dispase for 8-10 min at $37^{\circ}C$. Primary EC were cultured in EC growth medium on different extra cellular matrix (ECM), either collagen or gelation. Primary EC exhibits morphological characteristics and showed positive expressions of EC specific marker proteins i.e. PECAM1, KDR and VWF despite of their ECM surface; however, on collagen based surface they showed increase in mRNA level analyzed by qPCR. Primary EC cultured on collagen were sorted by flow cytometer using KDR marker and cultured as KDR positive cells and KDR negative cells, respectively. KDR positive cells showed dramatically increased in PECAM1 and VWF level as compared to KDR negative cells. Based on the above results, primary EC derived from GalT KO are successfully isolated and survived continuously in culture without becoming overgrown by fibroblast. Therefore, they can be utilize for xeno organ transfer, tissue engineering, and immune rejection study in future.

• Elastomers and Composites
• /
• v.38 no.3
• /
• pp.213-226
• /
• 2003

The cure and rheological behavior of diglycidyl ether of bisphenol F/nadic methyl anhydride resin system with the kinds of imidazole were studied using a differential scanning calorimeter (DSC) and a rotational rheometer. The isothermal traces were employed to analyze cure reaction. The DGEBF/ anhydride conversion profiles showed autocatalyzed reaction characterized by maximum conversion rate at $20{\sim}40 %$ of the reaction. The rate constants ($k_1,\;k_2$) showed temperature dependance, but reaction order did not. The reaction order (m+n) was calculated to be close to 3. There are two reaction mechanisms with the kinds oi catalyst. The gel time was determined by using G'-G" crossover method, and the activation energy was obtained from this results. From measurement of rheological properties it was found that the logarithmic 1:elation time of fused silica filled DBEBF epoxy compounds linearly increased with the content of filler and decreased with temperature. The highly filled epoxy compounds showed typical pseudoplastic behavior, and the viscosity of those decreased with increasing maximum packing ratio.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.2
• /
• pp.218-223
• /
• 2021

In this study, the possibility of use as a cartridge for 3D printing was confirmed by adding calcium to the alginic acid-added surimi mixture. The Alaska pollack Gadus chalcogrammus surimi added with alginic acid was immersed in a calcium solution (1 M calcium carbonate, 1 M calcium chloride, 1 M calcium sulfate, and 0.1 M calcium lactate) to evaluate the physical properties, color differences, and sensory properties of Alaska pollack surimi according to calcium types. As the results, in the case of surimi paste to which 1 M calcium carbonate was added, physical properties were weaker than that of 1 M calcium chloride, but gelation was appropriate and sensory properties was excellent. Addition of 1 M calcium chloride has the best physical properties, but it has a problem of bitter taste. With the addition of 1 M calcium sulfate, it has low solubility and poor physical properties as well as poor elasticity and bad taste. Addition of 0.1 M calcium lactate has weak physical properties but good sensory properties. From these results, 1 M calcium chloride has the best physical properties, but there is a decisive problem in sensory properties, so 1 M calcium carbonate is most suitable for commercial use.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.4
• /
• pp.305-316
• /
• 2021

This study relates to the development of a new gel sheet mask that finally does not require support based on the reactivity and acid/base reaction experiments of Tamarindus indica seed gum (TG), ethanol, and polyols. When TG and a specific alcohol was mixed at a certain mixing ratio, a transparent gel is formed by reaction with each component, and thus a gel sheet mask without support might be obtained using the mixture. In order to maximize skin tone improvement, a carbonation system of acid and base reactions was introduced, and skin brightness and moisturizing power were evaluated using a spectrophotometer and a moisture measuring device. Through this study, it is expected that the gelation reaction by hydrogen bonding of TG, ethanol, and polyols can be developed into various types, and the gel sheet mask formulation introduced in this study is expected to help develop new products in the future.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.9
• /
• pp.5-16
• /
• 2022

In recent years due to the development of urban and underground space, the number of ground disasters is increasing, and it is also leading to social problems. To solve the problem, a grouting method is generally used. However, the grouting method has material (grout) limitations in permeability, gelation properties and tensile resistance. Therefore, research on grout materials mixed with fibers is actively carried out to improve the problems. However, in the actual ground injection process, many difficulties have been faced causing the blockage of the inlet port and the injection tube. In this study, 'CNT-mixed grout material' was developed using CNT powder that can reinforce the tensile strength of soils. The uniaxial compressive and tensile strength tests were performed to obtain the optimal content and mechanical properties of the CNT Powder-mixed grout. It was found that the optimal CNT powder content is 0.5% that gives the average maximum strength. A one-dimensional injection test and the bulb formation test were carried out, and it was identified that the injection rate and bulb form could be controlled by pressure and mixing ratio. Field application of the CNT-Mixed grout is simulated using numerical analysis of slopes, foundations, and tunnels reinforced in several types. The positive effect of reducing plastic ranges and settlements was confirmed.