• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.20-21
• /
• 2006

In this paper, we studied the influence of EVA sheet gel content on photovoltaic module durability. Depending on thermal curing temperature and time during lamination, there are dramatic changes on chemical and physical characteristics. To find the optimum PV module process condition, Glass/EVA/Back Sheet scheme was made. Gel Content, FT-IR spectrum and SEM were used for the detail analysis. From these results, $110^{\circ}C/6min$ and $130^{\circ}C/4min$ lamination condition could be suggested for the best one for durable PV module processing. The further analysis is described in the following paper.

• 한국추진공학회지
• /
• 제17권3호
• /
• pp.47-55
• /
• 2013

본 연구에서는 곡관 채널에서의 비뉴튼 젤 추진제의 유동 특성에 대해 연구하였다. 물을 기본유체로 하는 모사젤을 Carbopol 941 젤화 작용제와 NaOH 농축액을 혼합하여 제작하였으며 입자 유무에 따른 유동 특성을 파악하기 위해 $Al_2O_3$ 나노 입자가 첨가된 젤을 제작하여 두 젤 추진제간의 유변학적 특성을 비교하였다. 두 모사젤에 대해 U-자형의 곡관부 위치별 유동특성과 Dean 와류(vortices)의 경향은 상이하였으나 나노 입자가 첨가된 모사젤 추진제의 경우 높은 컨시스턴시 지수에도 불구하고 두 모사젤 모두 비슷한 범위의 임계 Dean 수를 도출하였다. 나노 입자 첨가 유무와 무관하게 power-law 지수값이 임계 Dean 수를 결정하는데 주요 변수임을 판단할 수 있었으나 나노입자가 첨가된 젤의 경우 Dean 와류 강도의 변동폭이 상대적으로 크다는 결론을 내릴 수 있었다.

• 대한한의진단학회지
• /
• 제15권2호
• /
• pp.203-214
• /
• 2011

Objectives: The objective of the current study is to determine whether an ultrasound device system is adequate for measuring distance from the abdominal surface of Sangwan (CV13) to peritoneum in front of anterior surface of liver. Methods: We recruited 3 healthy young male subjects and 2 sonographers. The each sonographer measured vertical shortest distance from the abdominal surface of Sangwan (CV13) to peritoneum in front of anterior surface of liver with a ultrasound device with three methods of 3.5 MHz convex probe and gel, 9 MHz linear probe and gel, and 9 MHz linear probe and solid gel pad, three times in random order. Because the total variation could be divided into repeatability, reproducibility and subject-to-subject variation in Gage R&R method, we compared the sources of variation associated with the measurement system with an analysis of variance model. Results & Conclusions: Number of distinct categories is calculated on the basis of standard deviation of subject-to-subject divided by standard deviation of total Gage R&R. If the number of categories is five or more, the measurement system may be acceptable for the analysis of the process. The number of distinct categories of the ultrasound device system for measuring distance from the abdominal surface of Sangwan (CV13) to peritoneum in front of anterior surface of liver were 9.20 (9 MHz linear probe and gel), 14.70 (9 MHz linear probe and solid gel pad). So we concluded that repeatabilities and reproducibilities of the ultrasound device system for measuring distance from the abdominal surface of Sangwan (CV13) to peritoneum in front of anterior surface of liver with the methods of 9 MHz linear probe and gel, and 9 MHz linear probe and solid gel pad were acceptable.

• Journal of Microbiology and Biotechnology
• /
• 제29권1호
• /
• pp.44-54
• /
• 2019

Geldanamycin and its derivatives, inhibitors of heat shock protein 90, are considered potent anticancer drugs, although their biosynthetic pathways have not yet been fully elucidated. The key step of conversion of 4,5-dihydrogeldanamycin to geldanamycin was expected to catalyze by a P450 monooxygenase, Gel16. The adequate bioconversions by cytochrome P450 mostly rely upon its interaction with redox partners. Several ferredoxin and ferredoxin reductases are available in the genome of certain organisms, but only a few suitable partners can operate in full efficiency. In this study, we have expressed cytochrome P450 gel16 in Escherichia coli and performed an in vitro assay using 4,5-dihydrogeldanamycin as a substrate. We demonstrated that the in silico method can be applicable for the efficient mining of convenient endogenous redox partners (9 ferredoxins and 6 ferredoxin reductases) against CYP Gel16 from Streptomyces hygroscopicus. The distances for ligand FDX4-FDR6 were found to be $9.384{\AA}$. Similarly, the binding energy between Gel16-FDX4 and FDX4-FDR6 were -611.88 kcal/mol and -834.48 kcal/mol, respectively, suggesting the lowest distance and binding energy rather than other redox partners. These findings suggest that the best redox partners of Gel16 could be NADPH ${\rightarrow}$ FDR6 ${\rightarrow}$ FDX4 ${\rightarrow}$ Gel16.

• 대한화학회지
• /
• 제34권5호
• /
• pp.413-417
• /
• 1990

Sol-gel법을 통하여 만들어진 비정질 SiO$_2$ gel들의 구조가 열처리 온도, 80$^{\circ}C$, 250$^{\circ}C$, 450$^{\circ}C$ 그리고 1000$^{\circ}C$에 따라 변화하는 과정을 X-선 회절 강도 측정으로부터 구한 동경분포곡선을 이용하여 알아보았다. 그리고 이를 6개의 결정들과 비교하여 예상되는 구조를 밝혔다. 각 시편들은 용융법으로 구한 SiO$_2$의 구조와 O-O결합쌍을 제외하고는 가장 유사한 구조를 가지며 cubic형으로 나타났다.

• 한국작물학회지
• /
• 제50권spc1호
• /
• pp.228-230
• /
• 2005

형광 염료와 레이저 겔스캐너 장비를 이용하여 변성아크릴 아마이드 겔에서 전기 영동된 DNA를 신속하고 간편한 방법으로 기존의 은염색법과 비슷한 감도로 검출하고자 하였다. 변성아크릴아마이드 겔을 형광 염료인 SYBR Green (Molecular Probes)이나 Vistra Green (Amersham Bioscience) 0.01 X 희석액 (pH 8)으로 염색한 후 480nm 레이져, 520nm filer 옵션으로 스캔하여 DNA를 검출하였으며, 검출감도는 기존의 은염색법과 비슷하면서 염색 단계를 한 단계로 줄일 수 있었다.

• 태양에너지
• /
• 제12권2호
• /
• pp.18-27
• /
• 1992

졸-겔 기술에 의해 $WO_3$ 다충박막이 유리와 ITO coated glass 위에 증착되었다. 특성은 XRD, 분광광도계, DTA/TGA, SEM/EDAX 그리고 RBS에 의해서 분석되었다. 균질한 $WO_3$막은 유리기판위에 dipping속도 5mm/s에서 증착 되었으며 이 시료는 희석된 HCI 전해액을 사용하여 착색시킨 결과 낮은 근적외선 투과율을 나타내었다. DTA 결과 $380^{\circ}C{\sim}500^{\circ}C$ 범위의 gel data는 $WO_3$의 결정화 온도 형성을 결정하였으며 이 측정치는 졸-겔 박막의 결정화 온도와 일치하였다. RBS에 의해 착색되지 않은 $WO_3$ 졸-겔 막의 화학조성은 $WO_3$였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권6호
• /
• pp.496-503
• /
• 1994

In recent years Sol-Gel processing provides an interesting alternative method for the fabrication of ferroelectric thin layers and powder. PZT powder was prepared from an alkoxide-based solution by a Sol-Gel method. Gelation of synthesized complex solutions, microstructure, thermal analysis and crystallization behaviors of the calcined powder were studied in accordance with a water content and a catalyst. Especially gelation and crystallization behavior were analysed with the change of pH. The gelation time decreased as the pH of the mixed solution increased. For PZT powder with 650.deg. C heat treatment, 100% perovskite phase was formed by using either acidic or basic catalyst. By using either acidic or basic catalyst, we were able to get very fine powders of uniform shape with an average particle size of 0.8-1.mu.m.

• Journal of Periodontal and Implant Science
• /
• 제24권2호
• /
• pp.433-440
• /
• 1994

The purpose of this investigation was to study the efficacy and safety of 6% hydrogen peroxide gel as a daily home tooth bleaching gel. The subjects consisted of 20 male dental students representing a variety of acquired stain and each subject participated for a 4-week period. Tooth color analysis(Shade determination), sulcus bleeding index, probing depth and probing attachment level were done and recorded at baseline and at the end of each week of study. The results indicated that home bleaching gel containing 6% hydrogen peroxide was effective and caused no gingival inflammation. Sulcus bleeding index, probing depth and probing attachment level showed no change. In conclusion, 6% hydrogen peroxide gel is an effective and safe agent for daily home tooth bleaching.

• 한국통신학회논문지
• /
• 제34권11A호
• /
• pp.904-908
• /
• 2009

The PZT(lead, zirconium, titanium) based ceramics which, are reported to be ferroelectric materials have their important applications in the areas of surface acoustic waves (SAW), filters, infrared detectors, actuators, ferroelectric random acess memory, speakers, electronic switches etc. Moreover, these PZT materials possess the large electromechanical coupling factor, large spontaneous polarization, low dielectric loss and low internal stress etc. Hence, keeping in view the unique properties of PZT piezoelectric ceramics we also tried to synthesize indigenously the small sized PZT ceramic powder in the laboratory by using the modified sol-gel approach. In this paper, Propyl alcohol based sol-gel method was used for preparation of PZT piezoelectric ceramic. The powder obtained by this sol-gel process was calcined and sintering to reach a pyrochlore-free crystal phase. The characterization of synthesized material was carried out by the XRD analysis and the surface morphology was determined by high resolution scanning electron microscopy.