• 수산해양기술연구
• /
• 제47권4호
• /
• pp.290-299
• /
• 2011

Field tests were carried out with five different mesh sizes (86.6, 101.0, 121.2, 137.7, 151.5mm) to study the relative efficiency of monofilament and multifilament gill net for Marbled sole, Pleuronectes yokohamae, in the western sea of Korea, 2007-2009. The relative efficiency was analyzed by length distribution, catch in number, catch in weight and weight per individual for Marbled sole. Statistical T-test was done to verify the efficiency between two gears. In the field tests, the total body length range, catch in number and weight of Marbled sole was 15.8-48.2cm, 728 and 254,939g, respectively. During the field tests, Marbled sole less than 15cm length which is prohibition size of fishing was not caught, but the caught number of Marbled sole less than 19.5cm length which is first maturity length was 13 (1.8%) and the caught number of Marbled sole more than 19.5cm was 715 (98.2%). Catches of monofilament gill net was average 1.4 times more efficient than multifilament gill net. The weight per individual and total length by mesh sizes in the two gears tended to gradually increase according to mesh size increasing. But there was little difference of weight per individual and total length by mesh sizes between two gears.

• Journal of Ecology and Environment
• /
• 제38권3호
• /
• pp.383-388
• /
• 2015

Reservoirs consist of two different environments, the littoral and the pelagic zone, and different fishing gear is commonly used in each zone-gill nets in the pelagic zone and electrofishing in the littoral zone. However, an active fishing gear, the cast net, is normally used instead of electrofishing for scientific studies in South Korea. In order to estimate cast net effectiveness for determining fish status in reservoirs, the study was conducted at 15 reservoirs with two different fishing gears: a cast net in the littoral zone and gill nets in the pelagic zone. When combining catches of both gears, species richness increased substantially compared to using one gear only. There was a size difference in fish caught by each net, and small fish were predominantly caught with the cast net due to its small mesh size (7 mm). The combined length of six species, used for length-weight relationship analysis, collected with the cast net was smaller than that collected with gill nets (independent t-test, P < 0.05). In this study, cast net sampling provided sufficient data for the littoral zone, but not enough to identify the overall fish assemblage in studied reservoirs. Utilization of only one gear can therefore lead to substantial underestimation of fish status, and a combination of both gears is recommended for determining more reliable estimates of fish status in reservoirs.

• 수산해양기술연구
• /
• 제52권1호
• /
• pp.1-8
• /
• 2016

In this study, numerical method was used to assess technical properties and improve the Vietnamese tuna purse seine. The data were extracted from the two national level projects. The study results showed that average lead-line sinking speed reached 0.139 m/s and 0.143 m/s and maximum sinking depth was 61.6 m and 65.8 m for The gears 2003 and 2014 respectively. The maximum tension on ring line of The gear 2003 was 4,742 kgf and 2014 was 4,219 kgf. The improved tuna purse seines I, III and IV showed similar sinking speed results with 0.220 m/s, 0.219 m/s and 0.219 m/s respectively. The average lead-line sinking speed of the improved gear II was lowest with 0.215 m/s. The maximum lead-line sinking depth of the four improved gears I, II, III and IV were 116 m, 112 m, 115 m and 114.9 m respectively. Maximum tension on ring line of the improved gears I, II, III and IV were 5,657 kgf, 5,406 kgf, 5,645 kgf and 5,654 kgf respectively. The improved tuna purse seine IV is the most suitable for Vietnamese tuna purse seine fishery, Which corresponds with tuna purse seiner scale and its fishing supporting equipment at the present.

• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.112-119
• /
• 1993

본 연구에서는 강도의 측면에서 인벌류트 원통치차의 설계 및 성능평가를 돕 기위하여 퍼스널컴퓨터 상에서 간편히 수행할 수 있는 치차의 강도평가 시스템을 개발 한다.즉, 원통치차의 굽힘강도 및 면압강도와 이들과 관련하여 기하학적인 형상, 재질, 운전상태, 신뢰성, 안전계수 등 강도에 영향을 미치는 거의 모든 인자를 일목요 연하게 평가하고 이들이 강도에 미치는 영향을 판단할 수 있는 치차의 강도평가 과정 을 하나의 시스템으로 구성함으로써 설계현장 등에서 간편히 이용할 수 있도록 하고 최종적으로 설계의 자동화를 이룰 수 있도록 한다.

• 대한기계학회논문집A
• /
• 제36권5호
• /
• pp.537-543
• /
• 2012

본 연구는 운전조건 하에서 감속기 내부기어의 가공정밀도와 소음의 연관 특성에 관한 실험적 연구이다. 이를 위하여 유성기어열로 이루어진 감속기를 제작하였으며, 내부 기어는 정밀도를 다르게 가공한 기어로서 4 세트를 제작하여 비교 실험하였다. 감속기에 대한 소음 및 진동 신호는 신호분석법에 의해 채집되었으며, 정지상태로부터 운전 가능 최고 속도까지 균등하게 증속하며 신호를 채집하였다. 또한 소음 레벨은 소음계를 이용하여 측정하여 비교하였다. 기어의 가공정밀도에 대한 평가는 한국 산업기술 시험원(ktl)에 의뢰하여 일본공업규격(JIS)에 준하여 객관적으로 평가되었으며, 이를 소음, 진동 신호와 함께 비교 분석하였다.

• 한국전자통신학회논문지
• /
• 제15권2호
• /
• pp.259-266
• /
• 2020

자기 기어는 기계식 기어와 동일하게 기어의 특성을 나타내면서 각 회전자가 접촉하지 않아 마찰에 의한 소음 및 발열, 유지보수문제에서 기계식 기어보다 유리하다. 또한 권선계자를 사용하는 회전자를 적용할 경우 기어의 출력조절은 물론, 기어비 및 위급상황에서 자체적인 구동차단까지 가능하여 자기 기어의 활용가능성은 무한하다. 하지만 권선계자를 사용할 경우 영구자석과 철심간의 흡인력에 의한 코깅토크가 나타나게 되고 이는 회전자의 진동을 유발하는 토크 리플성분의 증가로 이어진다. 따라서 본 논문에서는 권선계자를 사용하는 회전자의 토크 리플을 저감하기 위해 회전자의 다양한 형상을 분석하였으며, 자기 기어의 토크 리플을 저감하기 위한 최적의 형상을 제시하였다.

• 농업과학연구
• /
• 제47권2호
• /
• pp.327-335
• /
• 2020

The purpose of this study was to analyze the load distribution and contact safety factor for the power take off (PTO) gear of a 71 kW class agricultural tractor. In this study, a simulation model of the PTO gear-train was developed using Romax DESGINER. The face load factor and contact safety factor were calculated using ISO 6336:2006. The simulation time was set at 2,736 hours considering the lifetime of the tractor, and the simulation was performed for each PTO gear stage at the engine rated power conditions. As a result of the simulation, the face load factors for the driving gear at the PTO 1^st, 2^nd and 3^rd stages were 1.644, 1.632, and 1.341, respectively. The contact safety factors for the driving gear at the PTO 1^st, 2^nd and 3^rd stages were 1.185, 1.216, and 1.458, respectively. As the PTO gear stage was increased, the face load factor decreased, and the contact safety factor increased. The load distributions for all the PTO gears were concentrated to the right of the tooth width. This causes stress concentrations and shortens the lifespan of the gears. Therefore, it is necessary to improve the face load factor and the contact safety factor with macro-geometry and micro-geometry.

• 한국정보통신학회논문지
• /
• 제18권9호
• /
• pp.2223-2228
• /
• 2014

실린더형 강재의 양 끝에 기어를 갖는 기어 축은 자동차 동력전달 장치의 부품으로 널리 사용되고 있다. 기어 축을 가공하는 순서는 먼저 실린더 모양 강재의 한 쪽을 공작기계의 척에 물리고 다른 쪽을 기어로 가공한 다음, 기어로 가공된 쪽을 기어 모양 척에 끼워 물리고 가공되지 않은 쪽을 가공하는 순서로 진행된다. 이 공정이 자동화되기 위해서는 한 쪽에 기어를 가공한 상태에서 다른 쪽을 가공하려 할 때 가공된 쪽과 가공되지 않은 쪽 판별과 기어 모양 척에 정확히 기어로 가공된 강재를 끼우는 작업의 자동화가 선행되어야 한다. 이에 본 연구에서는 기어 축에서 기어의 위치와 기어의 각도를 검지하기 위하여 자속의 검출을 활용하는 자기 검출 센서를 제안하였고 제안된 센서의 설계를 위해 자기장 해석을 유한요소방법(FEM)으로 수행하였다.

• 전기학회논문지
• /
• 제66권6호
• /
• pp.911-915
• /
• 2017

Recently, there has been an increasing interest in the non-contact power transmission method of magnetic gears. Since there is no mechanical contact, noise caused by friction can be reduced, and even if a sudden large force is applied, the impact of the gear is close to zero. Further, since the power is transmitted by the magnetic flux, it has high reliability. However, there is a problem that a loss due to a magnetic field due to use of a magnetic flux. The loss caused by the magnetic field of the magnetic gear is a joule loss called eddy current loss. In addition, the eddy current loss in the magnetic gear largely occurs in the permanent magnet, but it is a fatal loss to the permanent magnet which is vulnerable to heat. Particularly, magnetic gears requiring high torque density use NdFeB series permanent magnets, and this permanent magnets have a characteristic in which the magnetic force decreases as temperature increases. Therefore, in this paper, the eddy current loss of the permanent magnet according to the permanent magnet attaching method is analyzed in order to reduce the eddy current loss of the permanent magnet. We have proposed a structure that can reduce the eddy current loss through the analysis and show the effect of reducing the loss of the proposed structure.

• 수산해양기술연구
• /
• 제50권3호
• /
• pp.301-309
• /
• 2014

This study was carried out to compare the regional fishing gears and catches of the gape net with wings used in Jeonnam, Korea. The total length of the gear used in Yeosu, Wando and Jindo was 107.0m, 64.0m, 52.8m, and the size of codend was 4.3mm. 7.8mm. 9.8mm, respectively. The total number of bycatch species from anchovy (Engraulis japonicus) catches in Yeosu, Wando, and Jindo during the survey period were 21, 13, and 13 species. A total of individuals of anchovy accounted for over 90% out of total catches in all survey areas. The proportion of anchovy individuals was constantly high up to October in Yeosu, but it showed a sharp reduction to 18% in October in Wando with the increase of the individuals of Kammal thryssa (Thryssa kammalensis) and Big eyed herring (Sardinella zunasi). In Jindo, individuals of anchovy occupied over 99.8% out of total catches up to August. Since August, the number of individuals of Big eyed herring (Sardinella zunasi), Kammal thryssa (Thryssa kammalensis), and Slimy (Leiognathus nuchalis) has increased while the number of anchovy individuals were decreased.