• 한국안전학회지
• /
• 제11권3호
• /
• pp.53-58
• /
• 1996

This paper deals with the bending fatigue strength of sintering spur gears. The test specimens are used to sintering spur gear to be consisted of Fe-C-Ni-Mn and SCM415 spur gear. The fatigue test at a constant stress amplitude is performed by using an electrohydraulic servo-controlled pulsating tester. The S-N curves are obtained and the enhancement of fatigue strength due to carburized treatment is clarified, Accordingly, this study presents the fatigue strength of sintering spur gear, SCM415 spur gear and carburized gears of them. The strength enhancement due to the carburized treatment is discussed.

• 한국안전학회지
• /
• 제18권4호
• /
• pp.44-50
• /
• 2003

Design method for involute bevel gears is developed. The developed gear design system can design the optimized gear that minimize the number of pinion teeth with face tooth. Method of optimization is MS(matrix search) which is developed from this study. Design variables are pressure angle 20., transmitted power, gear volume, gear ratio, allowable contact stress and allowable bending stress. etc. Gears design method developed this study can be applied to the plane, helicopter, printer, machine tools.

• Tribology and Lubricants
• /
• 제16권5호
• /
• pp.357-364
• /
• 2000

In this study, the sliding wear in spur gears, using Archard's wear model, is analyzed. Formulas of tooth sliding wear depth along the line of action are derived. The tooth profile is modified Id make a smooth transmission of the normal loads and the cylinder profile for reducing the pressure spike is suggested. The sliding wear rate is calculated with these profiling results. We expect these modification methods to contribute to the reduction of sliding wear not only in the root, but the tip of tooth and tooth edge.

• 대한기계학회논문집A
• /
• 제37권8호
• /
• pp.1029-1033
• /
• 2013

오발 유량계의 회전자로는 타원형 기어가 사용된다. 타원형 기어를 사용하는 이유는 타원형 기어로 인해 생긴 공간을 통해 물을 계측하기 때문이다. 현재 타원형 기어는 일본에서 호브를 수입해 가공하고 있으며 그마저도 일본 회사와의 계약이 끝나면 가공할 수 없는 실정이다. 본 연구에서는 타원형 기어에 대한 수입 대체 효과 및 국내기술의 개발을 통해 해외 의존력을 탈피 할 수 있도록 타원형 기어 설계에 연구 목적을 두고 있다. 보통의 압력각을 타원형 기어에 사용하였을 경우 이의 간섭이 생겨 회전을 하지 못한다. 압력각이 증가하게 되면 이뿌리 부분이 두꺼워지고 이끝 부분이 좁아진다는 것을 이용하여 타원형 기어의 치형을 설계하였으며 이를 2D 및 3D로 검증하였다.

• 농업과학연구
• /
• 제43권4호
• /
• pp.656-664
• /
• 2016

Gear reducers are widely used for various agricultural machinery applications such as greenhouses, tractors, and agricultural vehicles. However, thermal deformation and surface pitting at gear tooth flank frequently occur in gear reducers due to high torque. Thus, surface heat treatment of gears is required to improve wear and fatigue resistance. The objective of this study was to simulate the load capacity of the agricultural gear reducer. The simulation was performed for the following three surface heat treatment methods: untreated gears, nitriding heat treatment, and induction hardening method, those mostly used for agricultural gear reducers. The load capacity of the gear reducer was simulated using the safety factor, limit bending stress, and limit contact stress of the gear. The simulation of the load capacity was conducted using KISSsoft commercial software for gear analysis. The main results of simulation test were as follows: first, the nitriding heat treatment resulted in the highest safety factor for bending stress, which was increased about 77% from those of the untreated gears. Second, the induction hardening was the highest safety factor for contact stress, which was increased about 150% from those of the untreated gears. The safety factor for contact stress of the induction hardening was increased about 64% from those of the nitriding heat treatment. The study result suggested that the surface heat treatments could enhance load capacity and that the method of surface heat treatment should be determined based on simulation results for appropriate use scenarios.

• 수산경영론집
• /
• 제42권1호
• /
• pp.1-18
• /
• 2011

This paper analyze a description of Korean fleet using bottom gears on the high seas. The need for this study arises from international moves to address the effects of fishing with bottom gears on vulnerable marine ecosystems (VMEs) and in view of a communication on the Korean policy in respect of this. There is growing concern over the impact of fishing using gears that come into contact with the seabed (bottom gears), in particular in deep-sea areas where vulnerable marine ecosystems including seamounts, hydrothermal vents and cold water corals are located. Korea is an important stakeholder in high seas bottom gear fisheries. For the past eight years, the issue of protecting biodiversity in the deep-sea in areas beyond national jurisdiction has been extensively debated by the United Nations General Assembly (UNGA) and in other international fora. As a result of the report and a review by the UNGA of the effectiveness of the measures called for in resolution 59/25, the UN General Assembly called for a series of specific actions to be taken by States and RFMOs in UNGA resolutions 61/105 in 2006 and 64/72 in 2009 adopted by consensus. Korea attaches great importance to the protection of marine ecosystems and has made active efforts to implement the UNGA Resolution 61/105 in areas where there is a regional fisheries management organization, a process of establishing such organization or no such multilateral regime. For the effective implementation of the UNGA Resolution 61/105 and 64/72, Korea views that the development of support tools and, most importantly, the development of a global database on VMEs are urgently needed because many countries lack the ability to identify VMEs and to assess whether individual bottom fishing activities would have significant adverse impacts on their own.

• 드라이브 ㆍ 컨트롤
• /
• 제14권2호
• /
• pp.23-29
• /
• 2017

In this study, a flexible multi-body dynamic simulation model of a knuckle boom crane is developed to evaluate the stress of spindle and rack gears under dynamic working conditions. It is difficult to predict potential critical damage to a knuckle boom crane if only the static condition is considered during the development process. To solve this issue, a severe working scenario (high speed with heavy load) was simulated as a boundary condition for testing the integrity of the dynamic simulation model. The crane gear model is defined as a flexible body so contact analysis was performed. The functional motion of a knuckle boom crane is generated by applying forces at each end of the rack gear, which was converted from hydraulic pressure measured for the experiment. The bending and contact stress of gears are theoretically calculated to validate the simulation model. In the simulation, the maximum stress of spindle and rack gears are observed when the crane abruptly stops. Peak impact force is produced at the contact interface between pinion and rack gears due to the inertia force of the boom. However, the maximum stress (bending/contact) of spindle and rack are under the yield stress, which is safe from damage. By using the developed simulation model, the experiment process is expected to be minimized.

• 수산해양기술연구
• /
• 제46권4호
• /
• pp.441-448
• /
• 2010

This paper was concentrated on the distribution and the composition of lost fishing gear on the sea bed around yellow croaker fishing ground in the near sea of Jeju, Korea from April to October 2009 in order to improve the fishery environment. Recovering lost fishing gears was carried out total 10 times with a trawlnet along the isobath. As the result, it seems reasonable to conclude that the amount of lost fishing gear has a deep connection with the dip of the sea bed as well as the fishing gear scale, fishing ground and so on. The amount of recovered lost fishing gears were in order of gillnets, dragged gears, traps and ropes. In particular, traps were recovered almost every time within the survey area.

• 수산해양기술연구
• /
• 제16권1호
• /
• pp.1-15
• /
• 1980

An underwater recording system was designed to measure the sound spectra of the underwater noises produced by fishing gears in operation. Recorded were noi~es from three types of fishing gears: an anchovy set net, three anchovy boat seine net and a stern trawlnet. Acoustic analysis were made using a heterodyne analyzer, a digital frequency analyzer and a level recorder. The no;'e produced by the anchovy set net was found in the high frequency region of the onset of ambient noise spectrum with a slope of - 6 dB/octave. Here the ambient noise spectrum is higher, though similar in shape, than Knudsen spectrum, and is attributed to the breaking action of the coastal wave. Measured noise spectra during the fishing operations of the anchovy boat seine nets are attributed to the background noise of the sea in the presence of the fishing vessels. The frequency distribution of the noise was 20~5, 000 Hz in the case of two steel anchovy boat seiners, and 20-3,000 Hz in the case of the wooden anchovy boat seiner. The predominant frequency range was 250~350 Hz and maximum sound pressure level was 122 dB (re $1\muPa$) in the case of the steel boat and ] 17 dB in the case of the wooden boat. The noises produced by the trawl fishing gears are remarkably higher than the background noi~e in the presence of the fishing vessel. The frequency distribution of the noi~e was 20-6,300 Hz. The predominant frequency range was 100~200 Hz and maximum sound pressure level was 137 dB ( re $1\muPa$) . The noise spectra were not so much different from that caused by vibrations of the towing cable and the structure of the ground rope of the trawl net towed in an experimental tank.

• 한국전자통신학회논문지
• /
• 제12권6호
• /
• pp.1065-1070
• /
• 2017

마그네틱 기어는 기계적인 접촉 없이 회전 기계의 입력측과 출력측이 자기적으로 결합되어 동력을 전달한다. 마그네틱 기어는 내측회전자, 외측회전자, 폴피스로 구성되어 있으며, 동력전달 시 두 회전체와 폴피스 사이의 자기저항 차이로 토크리플이 발생하게 된다. 이러한 토크리플은 회전기계의 소음과 진동의 원인이 되기 때문에 최소화하는 방안이 필요하다. 본 논문에서는 토크리플 저감 방안으로 폴피스의 각진 모서리를 깎아 필렛을 적용한 형상을 제안하였다. 2D 유한요소해석법을 활용하여 필렛 파라미터 변화에 따른 마그네틱 기어의 토크리플을 비교 및 분석하고 토크리플이 우수한 폴피스 형상을 모색하였다.