References
- H. Huh and J. Lee, "A Study on The Modeling and Operation Control of A Variable Speed Synchronous Wind Power System," J. of the Korea Institute of Electronic Communication Science, vol. 10, no. 8, 2015, pp. 935-944. https://doi.org/10.13067/JKIECS.2015.10.8.935
- K. Lee, W. Cho, J. Back, and I. Choy, "Design and Verification of Disturbace Observer based Controller for Windturbine with Two Cooperative Generators," J. of the Korea Institute of Electronic Communication Science, vol. 12, no. 2, 2017, pp. 301-308. https://doi.org/10.13067/JKIECS.2017.12.2.301
- L. Shah, A. Cruden, and B. Williams, "A Variable Speed Magnetic Gear Box Using Contra-Rotating Input Shafts," IEEE Trans. Magnetics, vol. 47, no. 2, 2011, pp. 431-438. https://doi.org/10.1109/TMAG.2010.2097273
- K. Atallah and D. Howe, "A Novel High-Performance Magnetic Gear," IEEE Trans. Magnetics, vol. 37, no. 4, July, 2001, pp. 2844-2846. https://doi.org/10.1109/20.951324
- H. Shin and J. Chang, "Analysis of Coaxial Magnetic Gear with Low Gear Ratios for Application in Counter Rotating Systems," J. of Magnetics, vol. 20, no. 2, 2015, pp. 186-192. https://doi.org/10.4283/JMAG.2015.20.2.186
- E. Park, S. Kim, S. Jung, and Y. Kim, "Correlation Analysis between Air Gaps and Torque Characteristics of Magnetic Gear," 2016 Electrical Machinery and Energy Conversion Systems Society Spring Conf. of the Korean Institute of Electrical Engineers, Jeju, Korea, Mar., 2016, pp. 223-225.
- S. Kim, E. Park, and Y. Kim, "Optimal Design of Ferromagnetic Pole Pieces for Transmission Torque Ripple Reduction in a Magnetic-Geared Machine," J. of Electrical Engineering & Technology, vol. 11, no. 6, 2016, pp. 1628-1633. https://doi.org/10.5370/JEET.2016.11.6.1628
- Y. D. Yao, D. R. Huang, C. C. Hsieh, D. Y. Chiang, S. J. Wang, and T. F. Ying, "The Radial Magnetic Coupling Studies of Perpendicular Magnetic Gears," IEEE Trans. Magnetics, vol. 32, no. 5, Sept., 1996, pp. 5061-5063. https://doi.org/10.1109/20.539490
- E. P. Furlani, "Two-dimensional Analysis for the Coupling of Magnetic Gears," IEEE Trans. Magnetics, vol. 3, no. 3, 1997, pp. 2317-2321.
- T. Lubin, S. Mezani, and A. Rezzoug, "Analytical Computation of the Magnetic Field Distribution in a Magnetic Gear," IEEE Trans. Magnetics, vol. 46, no. 7, 2010, pp. 2611-2621. https://doi.org/10.1109/TMAG.2010.2044187
- M. Jeong, C. Moon, H. Kim, Y. Chang, and T. Park, "A Study on Design of 50kW PMSG for Microgrid Application," J. of the Korea Institute of Electronic Communication Science, vol. 9, no. 4, 2014, pp. 527-536. https://doi.org/10.13067/JKIECS.2014.9.4.527
- K. Lee and Y. Kim, "A Study on The Reduction of Cogging Force of Stationary Discontinuous Armature Permanent Magnet Linear Synchronous Motor by Change in Auxiliary Pole," J. of the Korea Institute of Electronic Communication Science, vol. 5, no. 6, 2010, pp. 613-619.
- Y. Kim and J. Kim, "The Analysis of Skewed Armature Effect for Reduction of End Edge Cogging Force of Stationary Discontinuous Armature PMLSM," J. of the Korea Institute of Electronic Communication Science, vol. 9, no. 2, 2014, pp. 243-248. https://doi.org/10.13067/JKIECS.2014.9.2.243
- K. Lee, W. Cho, J. Back, and I Choy, "Design and Verification of Disturbace Observer based Controller for Windturbine with Two Cooperative Generators," J. of Korea Institute of Electronic Communication Science, vol. 12, no. 2, 2017, pp. 301-308. https://doi.org/10.13067/JKIECS.2017.12.2.301