• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.5
• /
• pp.85-92
• /
• 1998

This present paper describes a mathematical model of profile shifted elliptical gears, and this model is based on the concepts of envelope theory and conjugate geometry between the blank and the straight-sided rack cutter. The geometric model of the rack cutter includes working regions generating involute curves and fillets for trocoidal curves, and furthermore the addendum modified coeff. is considered for avoiding undercutting. The addendum modified coeff. is changed linearly along with pitch curves and must be the same absolute value at both major semi-axis and minor semi-axis. If undercutting is at all pronounced, the undercut tooth not only are weakened in strength, but lose a small portion of the involute adjacent to the base circle, then this loss of involute may cause a serious reduction in the length of contact. A very effective method of avoiding undercutting is to use the so-called profile shifted gearing. Non-undercutting condition is examined with the change of eccentricity and addendum modified coeff. in elliptical gears and then the minimum number of tooth is proposed not to gernerate undercutting phenomenon.

• Korean Journal of Ichthyology
• /
• v.20 no.3
• /
• pp.228-232
• /
• 2008

To investigate a proper sampling method for anchovy eggs and larvae in coastal waters of the South Sea, replicated samplings were made by different towing methods with different sampling gears and compared in terms of abundance and length composition. There was no significant difference in abundance in samples from vertical and oblique tows with a ring net. The abundance by replicated vertical tows with a ring net was not significantly different, but significant difference in abundance among sampling stations were found. The ring net sampled anchovy eggs in significantly greater numbers than collected by a NORPAC net, but both gears were not effective in obtaining quantitative samples of anchovy larvae larger than 3 mm. Therefore, samples by vertical tows with a ring net during the day at various stations is more efficient at estimating the density of anchovy eggs in an area compared to replicated sampling at a single station.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.1
• /
• pp.46-49
• /
• 2012

Gears are reliable and efficient power transmission elements. They have been widely used in all kinds of machinery. Nowadays, resource conservation energy conservation environmental improvements from the request of the compact, light weight, high efficiency, low cost Higher efficiency is required. Tooth root and bottom profiles of cylindrical gears affect bending fatigue life, but they are hard to measure with conventional gear measuring machine(GMM), because GMM is normally customized to measure only gear working flanks. The authors try to develop a new type of GMM by installing an extra 3D scanning probe and control software to measure tooth root and bottom profiles. First, in order to measure in various directions, a 3D scanning probe has been attached to the GMM developed. Next, calibration algorithm has been developed. Deviations of the calibration results are measured and it is found that systematic error must be caused by heat from driving motors. A new alternative GMM with driving motors generating less heat was designed and two GMMs are compared. Finally, 3 Dimension measurement of tooth root and bottom profiles of cylindrical gears is described.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.3
• /
• pp.54-62
• /
• 2017

When gears mesh, shock and noise are produced as results of tooth error and tooth deformation under load. Transmission error (TE) is the most important cause of gear noise and vibration because TEs affect the changes of the force and the speed of gears. Gear tooth modification research plays a positive role in reducing TE and improving the design level and transmission performance of transmission systems. In high-precision manufacturing gear, gear tooth modification is also commonly used to reduce noise in practical applications. In order to study the accuracy of gear transmission, some empirical gear profile micro-modifications are introduced, and a helical gear pair is modeled and analyzed in RomaxDesigner software to investigate the utility of these modification methods. Some of these will be selected as experimental proposals for gear pairs, and these manufactured gears will be tested and compared in a semi-anechoic room later. The final purpose of this study is to find reasonable and convenient empirical formulae to facilitate improved gear production.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.572-577
• /
• 1997

This present paper describes a mathematical model of profile elliptical gears, and this model is based on the concepts of envelop theory and conjugate geometry between the blank and the straight-sided rack cutter. The geometric model of the rack cutter includes working regions generating involute curves andd fillets for trocoidal curves, and furthermore the addendum modified coeff,is considered for avoiding undercutting. The addendum modified coeff, is changed linearly along with pitch curves and must be the must be the same absolute value at both major semi-axis and minor semi-axis. If undercutting is at all pronounced, the undercut tooth not only are weakened in strength, but lose a small portion of the involute adjacent to the base circle, then this loss of involute may ncause a serios reduction in the length of contact. A very effective method of avoiding undercutting is to use the so-called profile shifted gearing. Non-undercutting conditon is examined with the change of eccentricity and addendum modefied coeff. in elliptical gears and then the minimum number of tooth is proposed not to gernerate undercutting phenomenon.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.5
• /
• pp.48-56
• /
• 2016

In this paper, we analyze the power flow of an eight-speed automatic transmission by using a lever analogy for the manufacturing of planetary gears. The results indicate that the engine power is passed down to the carrier and ring gear in the first double pinion planetary gear (DPPG1), and to the sun gear, carrier, and ring gear in DPPG3 for the first speed. Although the power flow is similar in the second speed, the power circulation occurs in the second single pinion planetary gear (SPPG2). For the third speed, the engine power is passed from the carrier to the ring gear in DPPG, at which point the power is split between the sun gears of SPPG2 and DPPG3.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.464-469
• /
• 1999

Recently, the need for designing multi-stage gear drive has been increased as the hear drives are used more in the applications with high-speed and small volume. The design of multi-stage gear drives includes not only dimensional design but also configuration design of various machine elements. Until now, however, the researches on the design of gear drives are mainly focused on the single-stage gear drives and the design practices for multi-stage gear drives, especially in configuration design activity, mainly depend on the experiences and 'sense' of the designer by trial and error. We propose a design algorithm to automate the dimension design and the configuration design of multi-stage gear drives. The design process consists of four steps. The number of stage should be determined in the first step. In second step, the gear ratios of each reduction stage are determined using random search, and the ratios are basic input for the dimension design of gears, which is performed by the exhaustive search in third step. The designs of gears are guaranteed by the pitting resistance and bending strength rating practices by AGMA rating formulas. In configuration design, the positions of gears are determined to minimize the volume of gearbox using simulated annealing algorithm. The effectiveness of the algorithm is assured by the design example of a 4-stage gear drive.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.2
• /
• pp.153-163
• /
• 2011

The main purpose of this study is to understand the marketing approaches and strategies that are used to disseminating biodegradable fishing gears and distinguish the cognition and the non-cognition group's attitudes on the product. We used a technology acceptance model for analyzing product attributes and its impacts on fishers' purchase. The result of this research shows that 'perceived usefulness and easiness of use' have positive effect on 'purchase intention,' and then give impacts on 'purchase intention' for the entire respondents. For the cognitive respondents these factors have influence on 'attitude' but they do not affect 'purchase decision.' However, 'perceived usefulness and easiness of use' have much positive impact on 'purchase intention.' In the non-cognition group, the 'perceived intention' and 'company and country of manufacturers' have direct positive effect on 'purchase intention' through 'attitude' and also 'on 'purchase intention.' This research provides some meaningful policy implications on further development and technology marketing of biodegradable fishing gears.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.2
• /
• pp.88-98
• /
• 2011

Experimental fishing was carried out to compare the catches of main species and bycatch according to the codend mesh size (raschel, 15mm, 25mm, 35mm, 45mm) of stow net on anchor in the coastal waters of Seocheon after manufacturing five kinds of fishing gears and commercial fishing boat (7.93 tons) was used for it. Anchovy (Engraulis japonicus), southern rough shrimp (Trachysalambria curvirostris), beka squid (Loligo beka), cuttle fish (Sepia esculenta), swimming crab (Portunus trituberculatus) were dominant on the five kinds of experimental fishing gears. Southern rough shrimp was caught from all kinds of fishing gears and catches of anchovy was highest in the raschel codend, southern rough shrimp for 15mm, 25mm, 35mm codend and beka squid for 45mm codend. Bycatch proportion against total catches was 623,376g (28.7%) for 2,171,844g in raschel, 11,932g (1.7%) for 704,451g in 15mm, 3,616g (1.6%) for 221,432g in 25mm, 9,276g (4.9%) for 191,052g in 35mm and 2,724g (5.3%) for 51,431g in 45mm.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.594-602
• /
• 1990

A computer-aided design system of involute cylindrical gears(spur and helical gears) for power transmission is developed, in which the volume of a gear unit is minimized with satisfying various design constraints. As the design constraints, bending strength and pitting resistance of AGMA 218.01, scoring of Dudley's flash temperature, contact ratio, and involute interference of pinion are considered and effective factors for strength calculation(life, reliability, hardness ratio, load distribution, velocity, etc.) are also included. This complicated nonlinear optimization problem is solved by using ALM(Augmented-Lagrange-Multiplier) method with self scaling BFGS(Broydon-Fletcher-Goldfarb-Shanno) method employed for unconstrained optimization programming. This design method can be easily applied to designing power transmission gear unit in the machines of various kinds. It is expected for the proposed method to be a contribution for an automated design of gear unit towards weight minimization, miniaturization and high strength of gear unit.