• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.1
• /
• pp.1-4
• /
• 2003

This paper presents an attempt to develop probabilistic multistress life models to evaluate the lifetime characteristics of epoxy-encapsulated magnet wire with heavy build polyurethane enamel. A set of accelerated life tests were conducted over a wide range of pulsating voltages, temperatures, and frequencies. Samples of fine gauge twisted pairs of the encapsulated magnet wire were tested us-ing a pulse endurance dielectric test system. An electrical-thermal lifetime function was combined with the Weibull distribution of lifetimes. The parameters of the combined Weibull-electrical-thermal model were estimated using maximum likelihood estimation. Likewise, a generalized electrical-thermal-frequency life model was also developed. The parameters of this new model were estimated using multiple linear regression technique. It was found in this paper that lifetime estimates of the two proposed probabilistic multistress life models are good enough. This suggests the suitability of using the general electrical-thermal-frequency model to estimate the lifetime of the encapsulated magnet wire over a wide range of voltages, temperatures and pulsating frequencies.

• The Journal of the Korean dental association
• /
• v.15 no.12
• /
• pp.1027-1030
• /
• 1977

It has been widely believed that the exact measurement of the forces exerted on teeth and its structures by the lingual and perioral musculatures such as lip, cheek and tongue is important and significant in dentistry. Such measuring, moreover, is highly emphasized the importance of the fact that it can be of much help to study the physiological function displayed in the oral cavity. Recognizing the importance of measuring the pressures, the author has devised an electronic device consisting of pressure transducers utilizing reistance-strnain gauges. This electronic strain gauge was very easy to manipulate and its scale error was extremely minimized, unaffected by mouth temperature, mosture and external forces Author was able to read its results with attached meter without using calibration chart. Futhermore, the sensitivity of this electronic device was extremely high, Thus it facilitated to measure a force from 0 to 230 grams.

• Advances in aircraft and spacecraft science
• /
• v.8 no.1
• /
• pp.69-85
• /
• 2021

A modified fuzzy mechanical control of large-scale multiple time delayed dynamic systems in states is considered in this paper. To do this, at the first level, a two-step strategy is proposed to divide a large system into several interconnected subsystems. As a modified fuzzy control command, the next was received as feedback theory based on the energetic function and the LMI optimal stability criteria which allow researchers to solve this problem and have the whole system in asymptotically stability. Modeling the Fisher equation and the temperature gauge for high-speed aircraft and spacecraft shows that the calculation method is efficient.

• Journal of the korean Society of Automotive Engineers
• /
• v.3 no.1
• /
• pp.61-68
• /
• 1981

There are three types in frequency response accelerometer; one is lightly damped piezp type, another is oil damping stainguage type and the third is electro induction type accelerometer within electromagnetic damping. The usable frequency range of lightly damped accelerometers is limited to 0.2 of their mounted natural frequency for amplitude distortion of less than 5 percents. There have been situation where the measured motion contains unforeseen high - frequency components, which are regarded as such due to the accelerometer transfer function. There are several way to overcome amplitude distortion of the higher than anticipated frequency components; (I) to make use of the accelerometer with natural frequency three times and more as high as the measured frequency, (II) to establish data-analysis techniques which will account for the amplitude distortion, (III) to set up a notch filter circuit which has a transfer function that is the reciprocal of the accelerometer transfer function, and so on. This paper makes a report of the method as to(III), i. e., set up a few notch filter circuits, it is discussed what happens when the transfer functions, are in discord as to natural frequency of the filter and accelerometer damping vs. filter damping. And especially as for the cantilever strain gauge type accelerometer made by oneself with ease, it was compared and discussed between the ideological value and the experimental value of actual designed circuit in case of the mismatching of the transfer functions, and it was considered whether to be practicable or not, the result of which was as following; the useful frequency range of the accelerometer can be extended to near resonance if (a) the accelerometer mounted natural frequency and the filter center frequency are matched within .+-. 2 percent and (b) the damping ratios are matched within two factors. Therefore, we obtained the good result in improvement for extending frequency response characteristics of accelerometer.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.3
• /
• pp.483-492
• /
• 2017

Precipitation is one of key components in hydrological modeling and water balance studies. A comprehensive, optimized and sustainable water balance monitoring requires the availability of accurate precipitation data. The amount of precipitation measured in a gauge is less than the actual precipitation reaching the ground. The objective of this study is to determine the wind-induced under-catch of solid precipitation and develop a continuous adjustment function for measurements of all types of winter precipitation (from rain to dry snow), which can be used for operational measurements based on data available at standard automatic weather stations. This study provides Bayesian analysis for the systematic structure of catch ratio in precipitation measurement.

• Journal of Korea Water Resources Association
• /
• v.42 no.11
• /
• pp.963-972
• /
• 2009

The objective of this study is to evaluate an application of stochastic continuous storage function model with ensemble Kalman filter technique. The case study is performed at the upstream basin of Jibo streamflow gauge including Andong and Imha dam. Test period is for the rainy season during 2006 and 2007. Long term runoff analysis is feasible in the case of using deterministic model. Ensemble members for input data and parameters are generated using Monte Carlo simulation for the purpose of applying ensemble Kalman filter technique. The cumulative absolute errors of stochastic model to the deterministic one are improved for the amount of 17.5 %, 18.3 % and more than 40.0 % for Andong dam, Imha dam and Jibo station, respectively. The results indicate that the stochastic model improves the accuracy of the simulated discharge considerably.

• International Journal of Automotive Technology
• /
• v.6 no.1
• /
• pp.45-52
• /
• 2005

Interrupted creep tests for investigating the structural degradation during creep were conducted for a Mod.9Cr-1Mo steel in the range of stress from 71 to 167 MPa and temperature from 873 to 923 K. The change of hardness and tempered martensitic lath width was measured in grip and gauge parts of interrupted creep specimens. The lath structure was thermally stable in static conditions. However, it was not stable during creep, and the structural change was enhanced by creep strain. The relation between the change in lath width and creep strain was described quantitatively. The change in Vickers hardness was expressed by a single valued function of creep LCR(life consumption ratio). Based on the empirical relation between strain and lath width, a model was proposed to describe the relation between change in hardness and creep LCR. The comparison of the model with the empirical relation suggests that about 65% of hardness loss is due to the decrease of dislocation density accompanied by the movement of lath boundaries. The role of precipitates on subboundaries was discussed in connection with the abnormal subgrain growth appearing in low stress regime.

• Journal of Technology Innovation
• /
• v.8 no.1
• /
• pp.73-94
• /
• 2000

The main objective of this research is to examine the spillover effects of technological knowledge from IT industry to other industrial sectors and, based on empirical findings, to draw policy implications and suggest policy directions. To this end, we divide IT industry into IT equipment and IT service, assuming that these two sub-sectors are considerably different each other in terms of technology knowledge flow. Other industries are classified into 17 different sectors based on the KSIC of 1990. As the proxy measure of technological knowledge, the notion of R&D stock is employed. The Input/output(I/O) Table is used to define the inter-industrial flow pattern and to draw the knowledge flow matrix. As the research methodology, cost function model is employed to gauge the spillover effects of technological knowledge of IT industry. Based on the results of analysis, it is found that the economic impact of technology diffusion also exhibits a different pattern between IT equipment and IT service. The diffusion of IT equipment tends to show labor-substitution effect whereas IT service displays labor-creation effect. This fact should be considered in devising industry, education, and labor policy. The expectations from this research are as follows. First, the sectoral pattern, difference between IT equipment and service in particular, identified from this research may shed light on the sector-specific policy direction. It is emphasized that a sector-specific approach, rather than an aggregate approach, is relevant for formulating IT policy. Second, it is expected that the importance of technology diffusion programs and policy measures are recognized among policy makers in IT industry.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.2
• /
• pp.168-176
• /
• 2004

Interrupted creep tests were carried out on the Mod.9Cr-1Mo steel in order to investigate the structural degradation during creep. The ranges of creep stress and temperature were from 71 to 167MPa and 873 to 923k, respectively. The change of hardness and tempered martensitic lath width were measured in the grip and gauge parts of interrupted specimens. The lath structure was thermally stable in static conditions, but was not stable during creep, and the structural evolution was enhanced by creep strain. The relation between the change in lath width and strain was described in the from, $\delta$W= a ($W_s-W_o$)$cdot;varepsilon$, where $\varepsilon$ is the strain, $W_o$is the initial lath width, $W_s$ is the final lath width depending solely on stress, and a is the constant of the magnitude of 0.67 $\mu$m /strain. The change in Victors hardness was expressed by a one-valued function of creep life consumption ratio. Based on the empirical relation between strain and lath width, a model was proposed to explain the relation between change in hardness and creep life consumption ratio. The model revealed that about 65$%$ of dislocations in lath structures were eliminated by the migration of subboundaries.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.7
• /
• pp.2257-2265
• /
• 1996

In the cold rolling mill, it is very important that a constrained static flow stress of rolled strip and rolling force calculation model be exactly considered to improve an prediction accuracy for rolling forces. Therefore, in this study, the values of the constrained static flow stress are used by deriving the regression equation which is a function of rolling conditions(FDT, CT) and chemical compositions(C, Si, Mn), previously applied by making the tables of yield strength for hot coils with size. And with the consideration that an elastic deformation part of an rolled strip appears at the entry and delivery side of the contacting area between the work roll and rolled strip is calculated. By applying these methods, the more accurate prediction for rolling force is obtained. As a results, the deviation of thickness is significantly reduced in the rolling direction.