• Journal of Ocean Engineering and Technology
• /
• v.35 no.1
• /
• pp.82-90
• /
• 2021

Owing to the advantages of assuring the best views and seawater exchange, submerged breakwaters have been widely installed along the eastern coast of Korea in recent years. It significantly contributes to promoting the advancement of shorelines by partially inhibiting incident wave energy. Observations were carried out by a pressure-type wave gauge in the Bongpo Beach to evaluate the coefficients of wave transmission via a submerged breakwater, and the results obtained were compared with those of existing conventional equations on the transmission coefficient derived from hydraulic experiments. After reviewing the existing equations, we proposed a transmission coefficient equation in terms of an error function. Although it exhibited robust relationships with the crest height and breaking coefficient, deviations from the observed data were evident and considered to be triggered by the difference in the incident wave climate. Therefore, in this study, we conducted a numerical experiment to verify the influence of wave period on the coefficients of wave transmission, in which we adopted a parabolic-type mild-slope equation model. Consequently, the deviation from calculated results appears to practically cover all deviation range in the observed data. The wave period and direction of the incident wave increased, the transmission coefficient decreased, and the wave direction was determined to demonstrate a relatively significant influence on the transmission coefficient. It was inferred that this numerical study is expected to be used practically in evaluating the design achievement of the submerged breakwater, which is adopted as a countermeasure to coastal beach erosion.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.3
• /
• pp.226-232
• /
• 1982

The measurements of the jerking force and the tail beat by hooked carp were carried out using a strain gauge at a fish pond from July to August 1981. The maximum jerking force was sustained for a while in the initial state after a carp was hooked, but the jerking force was gradually decreased as a function of the time elapsed until the fish was utterly exhausted, and it converged to the body weight at last. The results are as follows : 1. The maximum jerking force $F_m(g)$ can be expressed with empirical formula : $$F_m=3.23W+105$$ where W (g) is the body weight. 2. Dynamic change of the maximum jerking force $F_n(g)$ by one tail beat with time $t_{n}(-10T/2{\leq}\;t_n{\leq}10T/2)$ can he induced with the equation as follows : $$F_n=(0.27W-6.52)(|t_n|+C)^{-2.10}$$ where the period T (sec) is given by the following equation with the body weight : T=0.000385W+0.193 3. The jerking force at each of the peak points $F_p$ (g) varies with the time elapsed t (sec) as following equation : $$F_{p}=(2.23W+105)e^{-{\beta}t}+W$$. The value of durability index $\beta$ was nearly zero in the initial state and about 1.7 in the exhausted state at last. 4. It was clearly shown that the change of jerking force by hooked carp was closely related to the tail beat from a paired difference T-test.

• Korean Journal of Veterinary Research
• /
• v.45 no.2
• /
• pp.255-261
• /
• 2005

The purpose of this study is to compare hepatotoxicity of each treatment for dermatophytosis; one is the administration of the ketoconazole only and the other, ketoconazole with diphenyl-dimeththyl-dicarboxylate. Have chosen the range of 14-24 months of healthy dogs divided by two groups (group 1 and group 2) for the experiment of which test proved positive in dermatophytosis diagnosis and showed normal reaction in terms of physical examination, blood chemistry and especially of liver function. Group 1 was administrated ketoconazole orally at 10 mg/kg/day and of same dose of ketoconazole with diphenyl-dimethyl-dicarboxylate for group 2. After administering, we have tested two groups by blood collecting every one week in order to check the differences of hepatotoxicity state through AST, ALT and r-GTP, the barometers of liver function which lasted for 12 weeks. Moreover, tested Indocyanine Green (ICG), known as susceptible gauge of function of excretion before starting the experiment and tested ICG as well after 12 weeks. The experiment of result the value of group 1 in AST, ALT and r-GTP has been highly rised after administering ketoconazole for 10 weeks meanwhile, of group 2 has shown a steady state troughout the whole experiment. For ICG test, we injected 0.5 mg/kg of ICG into a vein for both groups and tested the retention rate at regular interval of 15, 30, 45 minutes. The results of retention rate in two groups were similar to before the drug administration. However, after 12 weeks the retention rate of group 1 has been delayed, on the other hand, retention rate of group 2 were a steady state. In conclusion, the administration of ketoconazole only for a long period of time induced hepatotoxicity where as, the administration of ketoconazole with diphenyl-dimethyl-dicarboxylate didn't induce hepatotoxicity. Therefore, when doctors prescribes for a dog with dermatophytosis should not administrate ketoconnazole itself but with diphenyl-dimethyl-dicarboxylate and one who has abnormal condition of liver function should not be prescribed ketoconazole treatment. If there is a case needed to prescribe ketoconazole treatment, the regular monitoring should be accompanied by at the same time.

• Composites Research
• /
• v.15 no.4
• /
• pp.23-31
• /
• 2002

The two dimensional size effect of specimen gauge section ($length{\;}{\times}{\;}width$) was investigated on the compressive behavior of a T300/924 $\textrm{[}45/-45/0/90\textrm{]}_{3s}$, carbon fiber-epoxy laminate. A modified ICSTM compression test fixture was used together with an anti-buckling device to test 3mm thick specimens with a $30mm{\;}{\times}{\;}30mm,{\;}50mm{\;}{\times}{\;}50mm,{\;}70mm{\;}{\times}{\;}70mm{\;}and{\;}90mm{\;}{\times}{\;}90mm$ gauge length by width section. In all cases failure was sudden and occurred mainly within the gauge length. Post failure examination suggests that $0^{\circ}$ fiber microbuckling is the critical damage mechanism that causes final failure. This is the matrix dominated failure mode and its triggering depends very much on initial fiber waviness. It is suggested that manufacturing process and quality may play a significant role in determining the compressive strength. When the anti-buckling device was used on specimens, it was showed that the compressive strength with the device was slightly greater than that without the device due to surface friction between the specimen and the device by pretoque in bolts of the device. In the analysis result on influence of the anti-buckling device using the finite element method, it was found that the compressive strength with the anti-buckling device by loaded bolts was about 7% higher than actual compressive strength. Additionally, compressive tests on specimen with an open hole were performed. The local stress concentration arising from the hole dominates the strength of the laminate rather than the stresses in the bulk of the material. It is observed that the remote failure stress decreases with increasing hole size and specimen width but is generally well above the value one might predict from the elastic stress concentration factor. This suggests that the material is not ideally brittle and some stress relief occurs around the hole. X-ray radiography reveals that damage in the form of fiber microbuckling and delamination initiates at the edge of the hole at approximately 80% of the failure load and extends stably under increasing load before becoming unstable at a critical length of 2-3mm (depends on specimen geometry). This damage growth and failure are analysed by a linear cohesive zone model. Using the independently measured laminate parameters of unnotched compressive strength and in-plane fracture toughness the model predicts successfully the notched strength as a function of hole size and width.

• Journal of Korea Water Resources Association
• /
• v.37 no.11
• /
• pp.969-978
• /
• 2004

According to the report of hydrologic modeling study, from a quantitative point of view, a lumped model is more efficient than a distributed model. A distributed model has to simplify geospatial characteristics for the shake of restricted application on computer calculation and field observation. In this reason, a distributed model can not help having some errors of water quantity modelling. However, considering a distribution of rainfall-runoff reflected spatial characteristics, a distributed model is more efficient to simulate a flow of surface water, The purpose of this study is modeling of spatial rainfall-runoff of surface water using grid based distributed model, which is consisted of storage function model and essential basin-channel parameters( slope, flow direction & accumulation), and that procedure is able to be executed at a personal computer. The prototype of this model is developed in Heongseong Multipunose Dam basin and adapted in Hapchon Multipurpose Dam basin, which is larger than the former about five times. The efficiency coefficients in result of two dam basin simulations are more than about 0.9, but ones at the upstream water level gauge station meet with bad result owing to overestimated rating curves in high water level. As a result of this study, it is easily implemented that spatially distributed rainfall-runoff model using GIS, and geophysical characteristics of the catchment, hereafter it is anticipated that this model is easily able to apply rainfall data by real time.

• Journal of The Korean Society of Integrative Medicine
• /
• v.1 no.2
• /
• pp.23-35
• /
• 2013

Purpose : We intend to make the study date for an effect of therapy by comparing the functional level both before and after conducting handwriting training and strength training as a part of treatment to improve muscle strength and function of the patient's non-dominant hand. Method : 8 subjects in writing training group conducted hand writing training 30 minutes at once and three times a week for 4 weeks in total 12 times, and 8 subjects in muscle training group conducted muscle training program of putty and Rolyan ergonomic hand exerciser for 15 minutes respectively in sum up 30 minutes at once and three times a week for 4 weeks in total 12 times. 8 subjects in control group are not applied any training for 4 weeks. Results : It was much more effective in handwriting training than muscle strength training by Grooved pegboard because this study showed the speed decrease from 67.11 to 58.26 seconds in handwriting compared with muscle strength training which showed 5.22 seconds decrease from 67.54 to 62.32(P<.05). It showed about 1.34 muscle strength improvement from 6.60 to 7.94 in handwriting training and 0.92 improvement of muscle strength from 7.04 to 7.96 in muscle strength training by 3-jaw chuck pinch, so handwriting training was more effective(P<.05). It showed 11.58 seconds decrease in handwriting training from 26.62 to 18.01 seconds and 10.93 seconds decrease from 27.43 to 16.50 seconds in muscle strength training, so it was significantly shortened both in handwriting and muscle strength training(P<.05). Conclusion : Dexterity, muscle strength, and handwriting ability of non-dominant hand could improve both the handwriting training and the muscle strength training.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.9
• /
• pp.1333-1342
• /
• 2008

This study intended to evaluate the visual sensibility of textiles of knitting simulation through the painting function of SDS-ONE, a computer knitting system, with the use of various fancy yarns for hand knitting. For this study, six kinds of fancy yarns with difference manufacturing style and form were selected: loop yarn, tamtam yarn, fur1 yarn, fur2 yarn, ladder yarn, and tape yarn. In order to create a computer knitting simulation, paint function of SDS-ONE was employed to scan the fancy yarns for hand knitting with a scanner. Then, after the registration of the yarns as data, the yarn was brought in for knitting simulation in plain stitch with 3 gauge. After that a survey was conducted involving 60 female experts in their twenties. Using SPSS 12.0, factor analysis, reliability, Pearson correlation coefficient, ANOVA, Duncan test, and regression analysis were performed to analyze the collected data. First, according to the result of analyzing the visual sense factor, three factors of the 'inflexibleness/ruggedness sense', 'lightweight sense', and 'smoothness sense' was extracted. According to the result of analyzing the visual sensibility factor, three factors of the 'activity', 'grace', and 'purity' was extracted. Second, With regard to preference and purchase intention, the knitted fabric with tamtam yarn(H2) was preferred than the other samples, indicating that the respondents had intention to purchase it. As for word-of-mouth intention, H2 ranked the first place, implying the respondents had intention to recommend it to other people. Third, the examination of the use of products each knitting simulation knit found that sweater and muffler are the most appropriate knit products. And H2 was the most suitable sample for sweater and muffler products. This study tried to prove that knit textile can be visually evaluated through a computer knitting simulation without the actual knitting and then to provide accurate data to related companies or the academic circle.

• Advances in aircraft and spacecraft science
• /
• v.1 no.3
• /
• pp.311-330
• /
• 2014

Environmental impact of aircraft emissions can be addressed in two ways. Air quality impact occurs during landings and takeoffs while in-flight impact during climbs and cruises influences climate change, ozone and UV-radiation. The aim of this paper is to investigate airports related local emissions and fuel consumption (FC). It gives flight path optimization model linked to a dispersion model as well as numerical methods. Operational factors are considered and the cost function integrates objectives taking into account FC and induced pollutant concentrations. We have compared pollutants emitted and their reduction during LTO cycles, optimized flight path and with analysis by Dopelheuer. Pollutants appearing from incomplete and complete combustion processes have been discussed. Because of calculation difficulties, no assessment has been made for the soot, $H_2O$ and $PM_{2.5}$. In addition, because of the low reliability of models quantifying pollutant emissions of the APU, an empirical evaluation has been done. This is based on Benson's fuel flow method. A new model, giving FC and predicting the in-flight emissions, has been developed. It fits with the Boeing FC model. We confirm that FC can be reduced by 3% for takeoffs and 27% for landings. This contributes to analyze the intelligent fuel gauge computing the in-flight fuel flow. Further research is needed to define the role of $NO_x$ which is emitted during the combustion process derived from the ambient air, not the fuel. Models are needed for analyzing the effects of fleet composition and engine combinations on emission factors and fuel flow assessment.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.4
• /
• pp.15-25
• /
• 2012

This study is to develop a web-based real-time agricultural flood management system(RAFMS) for 378 agricultural reservoirs equipped with auto water level gauge stations. The RAFMS was designed to operate linking with Rural Agricultural Water Resource Information System(RAWRIS) which supports data viz. real-time rainfall and water level necessary for RAFMS. The system was constituted to monitor the floods simultaneously at each reservoir by calculating the real-time reservoir inflow from watersheds, water level, and release to downstream. In addition, the system has the prediction function for the flood by applying weather forecasting data from Korea Meteorological Administration(KMA).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.17 no.4
• /
• pp.275-282
• /
• 2001

Centric relation is defined the horizontal position between maxilla and mandible when condylar head of mandible is positioned adequately in mandibular fossa. The most recent concept of centric relation position is defined as the mandibular position in which the condyles are in their most superoanterior position in the articular fossa, resting against the posterior slope of the articular eminences, with the articular disk properly interposed. To be suitable as a reference point during occlusal management, a mandibular position of centric relation has to be functionally acceptable to the patient and clinically reproducible and achievable during everyday practice. There are numerous methods for determination of centric relation, and in this study we used three of them, Gothic arch tracing(Group I), leaf gauge(Group II), and anterior jig(Group III). The subjects were 10, 8 men and 2 women, age-ranged from 23 to 26 years old, had no prosthetics in thier mouth, and had no sign and symptom of temporomandibular disorders. We gained three occlusal records using each method, and then the degree of the reproducibility was examined with split cast technique. In this study the reproducibility of centric relation using split cast technique was greater in the order of Group I(mean 1.6), Group II(mean 1.4), and Group III(mean 1.3), but there was no significant differences among them statistically(p>0.05).