• 한국가스학회지
• /
• 제8권1호
• /
• pp.48-55
• /
• 2004

본 연구는 기존의 통합 가스안전관리 시스템에 힌트를 얻어 가스 및 에너지$\cdot$환경 공정에 있어서 웹을 기반으로 하여 안전, 보건, 환경 분야의 통합 시스템(WISHE; Web-based Integrated Safety, Health and Environment Management System)을 구축하는 것이다. 지금까지 산업현장에서 각종 규제와 법률에 따라 각각 관리되던 안전, 보건, 환경의 고유 업무 영역을 객체 위주의 정보 흐름도를 이용하여 면밀하게 분석하고, 통합 가능성을 파악한 후 및 장소에 구애를 받지 않는 웹의 장점을 이용하여 통합시스템을 만들었으며, 주위 모듈 및 각종 인증제도와 유기적으로 연계하여 관리인력 및 비용절감을 가능하게 하였다.

• 한국농공학회논문집
• /
• 제61권2호
• /
• pp.85-95
• /
• 2019

The internal environment in pig house is closely related to the animal productivity. In addition, it is important to consider a working environment inside the pig house due to high gas and dust concentrations. The poor working environment inside the pig house can cause health problems including respiratory diseases. To analyze the working environment, it is important to evaluate the ventilation efficiency to effectively remove harmful gases and dust. The purpose of this study is to develop a 3D CFD model to analyze the working environment in the pig house. CFD model was validated by comparing air temperature distributions between CFD computed and field measured data. The average air flow rate at the pig height was 40.1 % lower than the working height when incoming air was concentrated on upper layer by the installed ventilation system on the experimental pig house. Using the validated CFD model, the regional ventilation efficiency was computed by the TGD(tracer gas decay) method at the pig and working heights. There was a difference of ventilation efficiency on 14 % between the air stagnated section and the rest sections. Stagnated gas concentration can be effected by animal and human health.

• 한국CDE학회논문집
• /
• 제12권6호
• /
• pp.461-465
• /
• 2007

There have been 3E problems of energy, economy and environment since the earth has its history. Especially, the energy and environment problems have been getting serious after the modem industry revolution. Therefore, the demand of gas as an eco-friendly energy source is getting increased. With the demand of gas, the installation and use of gas boiler is also increased, so human life injury by the waste gas(CO) of boiler goes on increasing every year. It is the content about a life of the exhaust tube which is used at Gas boiler in this paper. We explain also the course to apply the 6SC(6 Step Creativity)of practical TRIZ and evaluate the resolution.

• 천문학회보
• /
• 제38권1호
• /
• pp.33.1-33.1
• /
• 2013

Galaxies undergo various processes in the cluster environment, which could affect their evolution. In particular, ram pressure due to intracluster medium (ICM) can effectively remove HI gas, which is a relatively diffuse form of interstellar medium (ISM). On the other hand, molecular gas is not expected to get easily stripped as atomic gas since it is denser and sitting well within the stellar disk in a deeper potential well. However, cluster galaxies are found to be redder and more passive in star formation activity compared to their field counterpart. This implies that molecular gas may also get affected somehow in dense environments. In this work, we investigate molecular gas properties of a sample of galaxies undergoing HI stripping due to the ICM. We present the 12/13 CO (2-1) data of four spiral galaxies in the Virgo cluster at different ram pressure stripping stages, obtained using the Sub Millimeter Array (SMA). CO morphology of the sample appears to be highly asymmetric and disturbed. Using the ratio of different lines, we probe the molecular gas temperature in different regions. We find higher gas temperature than the range normally found among field galaxies. We discuss how these distinct molecular gas properties may affect star formation and hence the evolution of the cluster galaxy population.

• 한국대기환경학회지
• /
• 제22권1호
• /
• pp.107-116
• /
• 2006

The main purpose of this study is to develop the greenhouse gas emission factor for power plant using bituminous coal. The power plant is a major source of greenhouse gases among the sectors of fossil fuel combustion, thus information of its emission factors is very essential to the establishment of control strategies for the greenhouse gas emissions. These emission factors derived in this study were compared with those of U. S. EPA, AGO and CCL. The $CO_{2}$ concentrations in the flue gas were measured using NDIR analyser and the GC-FID with a methanizer. The amount of carbon (C) and hydrogen (H) in fuel was measured using an elemental analyzer. Calorific values of fuel were also measured using a calorimeter. Caloric value of bituminous coal used in the power plants were 5,957 (as received basis), 6,591 (air-dried basis) and 6,960 kcal/kg (dry basis). Our estimates of carbon emission factors were lower than those of IPCC. The CO2 emission factors for the power plants using bituminous coal were estimated to be 0.791 Mg/MWh (by carbon contents and caloric value of the fuel) and 0.771 Mg/MWh (by $CO_{2}$ concentration of the flue gas). The $CO_{2}$ emission factors estimated in this study were $3.4\sim 5.4\%$ and $4.4\sim 6.7\%$ lower than those of CCL (2003) and U. S. EPA (2002).

• 센서학회지
• /
• 제32권2호
• /
• pp.95-99
• /
• 2023

Forest healing is an activity that enhances immunity and human health using various elements of nature, such as fragrance and scenery. Particularly, phytoncide composed of terpene, a natural volatile substance emitted by forest plants, activates the immune function and is an important raw material in health-related products, such as antibacterial and insect repellents. Moreover, phytoncide is used as a measure to evaluate the impact of the forest atmosphere on the human body. This study aims to implement a highly sensitive gas sensor system that can measure phytoncide in real-time, which is an essential element for realizing a forest healing environment. A gas generation apparatus was implemented by using an adsorption tube in consideration of filed applicability in a laboratory atmosphere to enable the measurement of α-pinene and limonene, which are among the main components of phytoncide. Throughout the experimental trials, the sensitivity of gas sensor arrays to α-pinene and limonene was confirmed. In addition, the classification results demonstrated the AVOCs and NVOCs can be well discriminated using PCA. The primary results confirmed the possibility of developing a high-sensitivity gas sensor system for phytoncide sensing in real time.

• Architectural research
• /
• 제21권1호
• /
• pp.21-29
• /
• 2019

Recent years in Korea, some new developed buildings are only using electricity as power for heating, cooling, bathing and even cooking which means except electricity, there is no natural gas or other kinds of energy used in such kind of building. In vehicle industry area, scientists already invented electric vehicle as an environment friendly vehicle; after that, in architecture design and construction field, buildings only using electricity appeared; the curiosity of the environment impact of energy consumption by such kind of building lead me to do this research. In general, electricity is known as a clean energy resource reasoned by it is noncombustible energy resource; however, although there is no environmental pollution by using electricity, electricity generation procedure in power plant may cause huge amount of environment pollution; especially, electricity generation from combusting coal in power plant could emit enormous air pollutants to the air. In this research, the yearly amount of air pollution by energy using under traditional way in research target building that is using natural gas for heating, bathing and cooking and electricity for lighting, equipment and cooling is compared with yearly amount of air pollution by only using electricity as power in the building; result shows that building that only uses electricity emits much more air pollutants than uses electricity and natural gas together in the building. According to the amount of air pollutants comparison result between two different energy application types in the building, residential SOFC (Solid oxide fuel cell) is simulated to apply in this building for decreasing environment pollution of the building; furthermore, high load factor could lead high efficiency of SOFC, in the scenario of simulating applying SOFC in the building, SOFC is shared by two or three households in spring and autumn to increase efficiency of the SOFC. In sum, this research is trying to demonstrate electricity is a conditioned environment friendly energy resource; in the meanwhile, SOFC is simulated efficiently applying in the building only using electricity as power to decrease the large amount of air pollutants by energy using in the building. Energy consumption of the building is analyzed by calibrated commercial software Design Builder; the calibrated mathematical model of SOFC is referred from other researcher's study.

• 한국통신학회논문지
• /
• 제33권11A호
• /
• pp.1087-1094
• /
• 2008

본 논문에서는 Cyclic-Prefix CDMA using Good-Autocorrelation-Sequence(GAS-CP-CDMA) 시스템의 초기동기 포착방법이 제안되었다. GAS-CP-CDMA 시스템에 사용할 수 있는 자기상관특성이 우수한 시퀀스는 m-시퀀스와 CAZAC 시퀀스가 있다. 비록 GAS-CP-CDMA 시스템이 이동통신 시스템의 상향링크에 적용되어 자신의 셀의 다중사용자 및 다중경로에 의한 간섭신호를 원천적으로 상쇄하여 기존 CDMA 이동통신 시스템에 비해 약 2배의 용량을 갖도록 제안된 시스템이지만, 통신을 시도하는 시점에서 초기동기를 신뢰성 있게 획득하는 것은 중요한 과제이다. 본 논문에서 비동기식 수신 전력 검출값과 임계값이 초기동기를 판단하기 위한 기준으로 사용되었다. 모의실험에 사용한 GAS-CP-CDMA 시스템용 시퀀스는 CAZAC 시퀀스를 사용하였다. 모의실험 결과 최적의 동작을 위한 적정 임계값은 주로 사용자 수에 의해 결정되는 것을 알 수 있었다. 본 모의실험의 결과를 통해 GAS-CP-CDMA시스템 구축에 필수적인 동기포착 구현이 가능함과 적정 임계값을 설정하는 방안이 도출되었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제24권4호
• /
• pp.11-19
• /
• 2019

This paper examines an assessment method for terminating the post-closure maintenance of a landfill using a simplified landfill gas model. The case study site is the Sudokwon Landfill in Incheon city, which was closed in 2000. The deviations of the results obtained by the regular model and the simplified model were both slightly over 10% from the measured data. Also, the deviation of the simplified model from the regular model has been less than 5% since 2005. Thus, the simplified model could be applied to other landfills that have been closed for at least 5 years. Additionally, the results of the mass balance analysis using the simplified landfill gas model indicated that 39% of the organic carbon was discharged, leading to organic carbon and organic matter content of 7.2 and 17.6%, respectively, in the landfill by the end of 2018.

• 한국대기환경학회지
• /
• 제23권4호
• /
• pp.478-486
• /
• 2007

Numerical analysis had been performed to understand flow characteristics of the flue gas and slurry in the absorber of a flue gas desulphurization (FGD) system using computational fluid dynamics (CFD) technique. Two-fluid(Euler-Lagrangian) model had been employed to simulate physical phenomenon, which slurry particles injected through slurry spray nozzles fall down and bump into the flue gas inflowing through inlet duct. It was not necessary to adopt pre-defined pressure drop inside the absorber because interaction between flue gas and slurry particles was considered. Hundreds of slurry spray nozzles were considered with the spray velocity at the nozzles, swirl velocity and spreading angle. The results note that the flow disturbance of flue gas is found at the bottom of the absorber, and the current rising with high speed stream is observed in the opposite region of the inflow duct. The high speed stream is reduced as the flue gas goes up, because the high speed stream of flue gas dumps falling slurry particles due to momentum exchange between flue gas and slurry particles. In spite of some disproportion in slurry distribution inside the absorber, escape of slurry particles from the absorber facility is not observed. The pressure drop inside the absorber is mainly occurred at the bottom section.