• 한국세라믹학회지
• /
• 제23권6호
• /
• pp.7-14
• /
• 1986

This work is concerned with the experimental and theoretical investigation of a kiln with the aim to obtain th best conditions of firing in a kiln, The 0.3$m^3$ down draft kiln of gas firing was designed and constructed. Temperature distributions in kiln combustion gas temperature primary and secondary air flow were measured in the kiln burnt with propane LP gas. And the temperature distri-butions of kiln surface were measured by the thermo camera.

• 에너지공학
• /
• 제28권2호
• /
• pp.55-62
• /
• 2019

본 연구는 가스가마를 사용하여 청자를 소성 할 경우 최적의 소성조건을 구하고자 하였다. 특히 환원분위기와 산화 분위기 등의 소성분위기를 가마내의 CO 농도로 명확하게 정의하였다. $1250^{\circ}C$로 청자유약을 소성한 경우, 가마 안의 일산화탄소 양이 0~4,500PPM에서는 산화 4,500~25,000PPM에서는 중성, 25,000PPM 이상에서는 환원분위기가 됨을 관찰 할 수 있었다. 가스 가마 안의 소성분위기와 소성온도를 균일하게 하면서 가스소모량과 소성시간을 줄이기 위해서는 가마 안의 연돌을 일부 막은 후 댐퍼로 조절하면 된다. 이와 같은 조절방법으로 가스량은 40%, 소성시간은 1시간을 절약할 수 있다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.59-60
• /
• 2013

Rotary kiln furnace is one of the most widely used gas-solid reactors in the industrial field. Although the rotary kiln is a versatile system and has different size, approach to the reactor modeling can be generalized in terms of flow motion of the solid and gas phase, heat transfer and chemical reactions on purpose. In this paper, a performance analysis example case of axial direction direct flame rotary kiln is introduced.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.75-78
• /
• 2012

Rotary kiln furnace is one of the most widely used reactors in industrial field. In this paper, 0-dimensional heat and mass balance for direct coal flame rotary kiln was performed preferentially, then a simplified 1-dimensional model was developed based on 0-dimensional analysis data to proceed additional thermal analysis. Compared the results with the currently operating rotary kiln data to validate 1-dimensional model. Through this procedure, it can help to derive fundamental idea for design and operation of rotary kiln.

• 한국연소학회지
• /
• 제18권3호
• /
• pp.9-23
• /
• 2013

A rotary kiln furnace is one of the most widely used gas-solid reactors in the industrial field. Although the rotary kiln is a versatile system and has different size, approach to the reactor modeling can be generalized in terms of flow motion of the solid and gas phases, heat transfer, and chemical reactions on purpose. In this paper, starting from a zero-dimensional model and extending to higher dimension and comprehensive models, overall procedure of the design development of rotary kiln reactors and considerations are presented. The approaches to performance analysis of the reactors are introduced and examples of application cases are presented.

• 한국세라믹학회지
• /
• 제24권2호
• /
• pp.161-169
• /
• 1987

An experimental study of the characteristics and the behavior of flames, and the aerodynamic flow pattern was carried out in the present work on a down draft kiln for gas firing. The aim of this work is to establish a behavior of flames and to know the extent to which the flow pattern is affected by the height of baffle plate. The measurements of temperature, concentrations of fuelgas, and kiln pressure were conducted at different temperature in kiln, and at different height of baffle plate. From the obtained results, it was found that the characteristics of thestagnation zone are greatly affected when changing over the height of baffle plate, and the best condition of that was 115m/m.

• 한국세라믹학회지
• /
• 제53권1호
• /
• pp.13-17
• /
• 2016

It is highlighted that increasing the adsorbent surface area on volumetric basis is very important in providing an easy access for gas molecules. Fine particles around $3{\mu}m$ of soft-burned dolomite kiln dust (SB-DKD) were hydrated to wet slurry samples by ball mill process and then placed in a chamber to use spray dryer method. Spherical granules with particle size distribution of $50{\sim}60{\mu}m$ were prepared under the experimental condition with or without addition of a pore-forming agent. The relationship between bead size of the pore-forming agent and size of SB-DKD particles is the most significant factor in preparation of spherical granules with a high porosity. Whereas addition of smaller beads than SB-DKD resulted in almost no change in the surface porosity of spherical granules, addition of larger beads than SB-DKD contributed to obtaining of the particles with both 15 times larger average pore volume and 1 order of magnitude larger porosity. It is considered that spherical granules with improved $N_2$ gas adsorption ability may also be utilized for other atmospheric gas adsorption.

• Carbon letters
• /
• 제3권4호
• /
• pp.205-209
• /
• 2002

In the reaction of gas-solid phases, the microwave energy plays a role as a catalyst, because it causes friction between adjacent molecules and enables an unique characteristics of interior heating of the materials. When the dipole gases are adsorbed inside of the pore of carbon materials, the gases are decomposed by the microwave energy and reacted with the carbon atoms. Using this principle, we could make the activated carbon from coconut shell within 20 minute, and this residence time for activation is about 1/16 of rotary kiln. The BET surface area of activated carbon made by microwave is about $1,100m^2/g$ similar to conventional method of rotary kiln. In this study, the power of microwave generator was 400~1000W, and the gas for activation was steam mainly.

• 시멘트
• /
• 통권24호
• /
• pp.29-34
• /
• 1968

• 자원리싸이클링
• /
• 제31권2호
• /
• pp.33-39
• /
• 2022

본 연구에서는 Rotary kiln(RK)을 이용하여 바나듐 염배소 전처리시 적정온도를 유지하기 위한 열화학적 모델링 관련 인자에 대해 논의하였다. 관련 모델 메카니즘은 열화학 관련 반응속도모델, 열수지 및 열전달 등이며 이를 통해 rotary kiln내 온도분포를 직관적으로 추정할 수 있다. 이러한 작업을 통해 최적 염배소 온도인 1000 ℃(또는 약 1273 K) 근방을 kiln내에서 장기간 유지하는 것이 관건이다. 본 연구에서는 탄화수소(천연가스) 연료연소 및 광석 산화반응으로부터의 발열과 광석으로의 복사열전달 등을 산정하였다. 또한 열화학 측면에서 Rotary kiln내 적정 배소온도구역에서의 온도구배 완화를 위한 방안을 제시하였다.