• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.1
• /
• pp.32-40
• /
• 2008

Methyl bromide has been used as a representative fumigant for quarantine, and several poisoning cases have occurred recently by this chemical in Korea. The purpose of this study is to evaluate workers' exposures to airborne methyl bromide in the importing and exporting plant products quarantine companies. Air samples were collected 400/200 mg Anasorb 747TM and were analyzed by gas chromatograph /flame ionization detector according to the Occupational Safety and Health Agency (OSHA) Method PV2040. Geometric mean (GM) and arithmetic mean (AM) of total 27 workers' exposure concentrations to airborne methyl bromide were 1.12 ppm and 0.24 ppm, respectively. Two exposures(12.1 ppm and 12 ppm as 8hr-TWA) of total 27 workers' exposures exceeded the Korean standard (5 ppm) of Ministry Labor, while 4 exposures (15%) exceeded the Threshold Limit Value (TLV) (1 ppm) of American Conference of Governmental Industrial Hygienists (ACGIH). Seven samples (11%) of total 63 short-term air samples exceeded the OSHA Permissible Exposure Limit (PEL) 20 ppm (Ceiling). The opening (management) task in wood fumigation by tent showed the highest short-term exposure concentrations (AM: 18.6 ppm, GM: 0.58 ppm, maximum: 340.7 ppm). The maximum level in treatment task of the same process was 2.01 ppm. Methyl bromide concentrations in opening operation was significantly higher than that in treatment operation (p<0.05). In conclusion, the GM of workers' 8hr-TWA exposures to airborne methyl chloride in the importing/exporting plant quarantine industry was estimated below the ACGIH TLV (1 ppm). However, opening task in the fumigation of wood being covered with tent or fumigation of pant products in container showed the levels exceeding ACGIH TLV (1 ppm), and opening task in the fumigation of wood being covered with tent showed the level exceeding the Korean standard of Ministry of Labor (5 ppm).

• Korean journal of food and cookery science
• /
• v.6 no.4 s.13
• /
• pp.27-32
• /
• 1990

Lipids of Job's tears (Yullmoo) were extracted by the mixture of chloroform: methanol (2:1, v/v) and from these lipids, triglycerides were separated by column chromatography (Sephadex G-25 column) and then confirmed by thin layer chromatography (TLC) and reconfirmed by gas chromatography (GC). The triglycerides were fractionated into 6 groups on the basis of their partition numbers (PN) by reverse phase high performance liquid chromatography (HPLC) on a column Shimpack CLC-ODS using tetrahydrofuran-acetonitril (25:75) mixture as a solvent. Each of these collected fractions gave one to two peaks in the GC chromatograms according to the acyl carbon number (CN) of the triglyceride and fatty acid composition of the triglycerides were also analyzed by GC. From the results, the major triglycerides of Job's tears lipids were estimated to be C18:1 C18:2 C18:2 (OLL, 38.2%), C16:0 C18:2 C18:3 (PLLn, 15.7%), C18:1 C18:1 C18:2 (OOL, 12.6%).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.208-208
• /
• 2010

Zinc oxide (ZnO) is a functional material with interesting optical and electrical properties, a wide band gap (more than 3.3 eV), a high transmittance in the visible light region, piezoelectric properties, and a high n-type conductivity. This material has been investigated for use in many applications, such as transparent electrodes, blue light-emitting diodes, and ultra-violet detector. ZnO films grown under low oxygen pressure by thin film deposition methods show low resistivity and large free electron concentration. Therefore, reducing the background carrier concentration in ZnO films is one of the major challenges ahead of realizing high-performance ZnO-based optoelectronic devices. In this study, we deposited ZnO thin films on sapphire substrates by pulsed laser deposition (PLD) with employing an oxygen plasma source to decrease the background free-electron concentration and enhance the crystalline quality. Then, the substrate temperature was varied between 200 'C to 900 'C The vacuum chamber was initially evacuated to a pressure of $10^{-6}$ Torr, and then a pure $O_2$ gas was introduced into the chamber and the pressure during deposition was maintained at $10^{-2}$ Torr. Crystallinity and orientation of ZnO films were investigated by X-ray diffraction (XRD). The film surface was analyzed with atomic force microscope (AFM). And electrical properties were measured at room temperature by Hall measurement.

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.19-28
• /
• 2008

In this paper, we implemented an intelligent home service robot system which alerts users to danger by wireless internet platforms for interoperability(WIPI) of a cellular phone. This paper discusses the three parts of the system: robot, middleware and mobile system. First, the robot consists of a gas sensor, a fire detector, ultrasonic sensors, motors, a camera and a Bluetooth module. The robot perceives various danger circumstances. Second, the middleware connects the robot and the mobile system. It monitors the robot and sends emergency notification SMS message to the user's cellular phone if in danger. Third, the mobile system sends commands which control the robot using TCP/IP protocol. The proposed scheme is to control the sensors of the robot part through Atmega 128 processor, and the robot and middleware parts will be installed in the household, and will be controled by mobile part from the outside.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.1
• /
• pp.156-172
• /
• 1999

Potential chemical hazards encountered in painting operation of four shipyards and a ship-repair shop were investigated through the material safety data sheets (MSDS). Material safety data sheets (MSDS) for 307 paints, 50 thinners and 34 binders were collected and reviewed. It was shown that various organic solvents such as aromatic hydrocarbons, aliphatic hydrocarbons, ketones, alcohols, glycols, glycol ether acetates and esters were contained in painting materials. Of these solvents, xylene was found in the largest number of painting materials. sixty percent of the thinners contained xylene in the contents of 20-100%. Other most frequently found solvents were 1-methoxypropanol, 1-methoxypropyl acetate, n-butanol, methyl isobutyl ketone, toluene, isopropanol, and n-butyl acetate, etc. Glycol ethers such as 2-methoxyethanol (2-ME), 2-methoxyethyl acetate (2-MEA), 2-ethoxyethanol (2-EE), 2-ethoxyethyl acetate (2-EEA) and 2-butoxyethanol (2-BA) were regarded as having the potential to cause adverse reproductive effects, embryotoxic effect and hematotoxic effects, and were found in some epoxy panting materials. Coal tar pitch was included in some paints(13%) where polynuclear aromatic hydrocarbons (PAHs) could be contaminated. Inorganic pigments such as lead chromate and zinc potassium chromate were found in some paints (8%). The epoxy resin based paints, which may contain isocyanates such as toluene diisocyanates and hexamethylene diisocyanates causing potential sensitization and asthma to upper respiratory organ, were mostly used in the shipyards. The constituents in the MSDS were significantly different from the results analyzed using gas chromatography/mass detector: minor constituents or impurities were omitted in many MSDS. In conclusion, xylene was the most frequent organic solvent in painting materials, and glycol ethers, including 2-ME, 2-MEA, 2-EE, 2-EEA and 2-BA, were found some products. Also, painting workers may be exposed to PAHs, lead, chromate, isocyanates, organic tin and other various chemicals. The compositions of chemicals in painting materials were variable significantly, and the hazards were changed. These facts should be considered in environmental monitoring and control of the hazards.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.3
• /
• pp.301-306
• /
• 2016

Objectives: Direct-reading instrument(Photoionization detectors, PID) and quantitative analysis using active type air sampling (Gas chromatography-flame ionization detector, GC-FID) were tested to evaluate their ability to detect volatile organic compounds(VOCs) in a semiconductor manufacturing plant. Methods: The organic compounds used were acetone and ethanol which are normally used as cleaning solutions in the semiconductor manufacturing. The evaluation was based on the preparation of test solutions of known acetone and ethanol concentration in a chamber($600{\times}600{\times}1150mm$). Samples were prepared that would be equivalent to 5~100 ppm for acetone and 10~ 200 ppm ethanol. GC-FID and PID were evaluated simultaneously. Quantitative analysis was performed after sampling and the direct-reading instrument was checked using real-time data logging. Results: Positive correlations between PID and GC-FID were found for acetone and ethanol at 0.04~2.4% for acetone(TLV: 500 ppm) and 0.1~8.3% for ethanol(TLV: 1000 ppm). When the sampling time was 15 min, concentration of test solution was the most similar between measurement methods. However, the longer the sampling time, the less similar the results. PID and GC-FID had similar exposure patterns. Conclusions: The results indicate that PID and GC-FID have similar exposure pattern and positive correlation for detection of acetone and ethanol. Therefore, PID can be used for exposure monitoring for VOCs in the semiconductor manufacturing industry. This study has significance in that it validates measuring occupational exposure using a portable device.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.25 no.3
• /
• pp.489-495
• /
• 2011

The purpose of this study was to analyze harmful heavy metals, sulfur dioxide and residual pesticides in 30 kinds of oriental medical materials. This study was carried out on 30 samples of oriental medical materials. The examination's methods fallow the guideline of Food and Drug Administration. Inductively Coupled Plasma Mass Spectrometer (ICP-OES) was used to analyze lead, arsenic, cadmium. Mercury was analyzed by amalgamation method. A modified Monier-Williams method was used to analyze sulfur dioxide. The Gas Chromatography / Electron Capture Detector (GC/ECD) was used to analyze residual pesticides. Most of the results were within normal limits at baseline. but Cadmium was detected 0.523 mg/kg more than 0.3 mg/kg in Cinnamomi ramulus and Endosulfan was detected 11.595 mg/kg more than 0.2 mg/kg in Alismatis rhizoma. We needs to keep the quality of herbal medicines assessing and controling for safety of herbal medicines.

• Journal of Animal Environmental Science
• /
• v.19 no.2
• /
• pp.123-132
• /
• 2013

This survey was conducted to investigate the current state of odor emission and control from 48 site of Hanwoo, dairy, swine and poultry farms in Korea. On-site complex odors assessment by the method of 6 step direct sensory evaluation and ammonia concentrations by portable gas detector on the boundary line of farms were evaluated and detected as 1.11 & 2.78 ppm, 1.67 & 2.56 ppm, 1.91 & 2.89 ppm, 1.8 & 2.4 ppm and 1.33 & 2.33 ppm, respectively. Almost of Hanwoo, dairy and poultry farms were nothing the complaints occurred for the last 2 years, however as 60% of swine farms were suffered odor complain. All of livestock operations were used the additives for improving the farm environment and spent the considerable costs for odor reduction. There were several plans almost farms, as a fortify maintenance, keep clean, tree planting, expansion facilities for manure treatment or odor reduction.

• Korean Journal of Food Science and Technology
• /
• v.23 no.5
• /
• pp.582-586
• /
• 1991

Bangah(Agastache rugosa O. Kuntze), grown in East Asia has very unique and strong flavor, known as wild plant adding to loach soup stock for deodorizing fishy in southern province Korea. In this work, flavor components in essential oil of bangah were analyzed by steam distillation/gaschromatography and identified by gas chromatography/mass selective detector. A total of 32 components were identified in essential oil including 14 hydrocarbons, 6 aldehydes, 5 phenols, 3 alcohol, 2 esters, 5 ketones and 1 other compounds. The major flavor components were estragole, limonene, caryophyllene, eugenol and anethol. It was newly appeared some of aldehydes and sesquiterpenes in ripened bangah. The flower portion was showed more various flavor profiles than leaf and stem. And the respective peak areas were also the largest in flower portion.

• The Plant Pathology Journal
• /
• v.28 no.2
• /
• pp.185-190
• /
• 2012

Sclerotinia sclerotiorum is a serious pathogen which causes yield loss in many dicotyledonous crops including potato. The objective of this study was to assess the potential of biofumigation using three Brassica crops including Brassica napus, B. juncea and B. campestris against potato stem rot caused by S. sclerotiorum by in vitro tests. Both macerated and irradiated dried tissues were able to reduce radial growth and sclerotia formation of five pathogen isolates on PDA, but macerated live tissues were more effective. Compared with other tested crops, B. juncea showed more inhibitory effect against the pathogen. The volatile compounds produced from macerated tissues were identified using a gas chromatograph-mass spectrometer. The main identified compounds were methyl, allyl and butyl isothiocyanates. Different concentrations of these compounds inhibited mycelial growth of the pathogen in vitro when applied as the vapor of pure chemicals. A negative relationship was observed between chemicals concentrations and growth inhibition percentage. In this study, it became clear that the tissues of local Brassica crops release glucosinolates and have a good potential to be used against the pathogen in field examinations.