• Fashion & Textile Research Journal
• /
• v.12 no.6
• /
• pp.789-795
• /
• 2010

The purpose of this study was to examine the appropriate surplus of clothing for a jacket bodice pattern of middle-aged obese men by using the 3D virtual twin and virtual garment simulation system. The results were as follows ; 1. BMI rate of middle-aged males was 28.13 which was equivalent to mild obesity, whereas WHR(W/H ratio from waist to hips) rate was near 1.00 which was highly dangerous against their obesity. In case of middle-aged obese men, the WHR was significantly higher than the entire middle-aged men's average and the section shape in which their thickness was relatively more than width. 2. As a result of appearances evaluation through virtual garment simulation, the cut-off amount of the side seam and the center back was regulated accordingly. Hereby, the final tolerance range was set up at 21.15 cm at the hips, so that the appearances became better and the bilateral distribution of the cross section and space length was formed symmetrically. Especially in case of increasing the cross amount of hems to produce a natural silhouette of the waist-to-hips parts, the ease of buttocks was judged to be moderate, but it turned out that a wavy cross section was made and the silhouette was not good. Thus it was found to be not good that the ease of the hips became excessively increased in proportion as circumference of waist and belly were increased in obesity. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.

• The Research Journal of the Costume Culture
• /
• v.19 no.5
• /
• pp.1009-1018
• /
• 2011

The purpose of this study was to develop slacks patterns for middle-aged abdomen-obese adult males by using the 3D virtual-twin and virtual-garment simulation system. The criteria for subjects in this study were males who had over $25kg/m^2$ of BMI, over 90cm of waist, and over 0.90 of WHR. A total of 211 adult males who met these criteria were enrolled. The results were as follows: first, a new slacks pattern considerate of abdomen-obese men was development. The basic numerical formula were as follows: front and back hip girth H/4+3.5, front waist girth W/4+1+0.5, back waist girth W/4+1-0.5, front crotch extension H/16, back crotch extension H/8-0.5, front pleats amount 2.7, and back dart amount 1.5. Second, according to the results of the new slacks patterns appearance evaluation, the new slacks pattern scored more highly than the existing pattern in silhouette and ease amount, confirming that the new slacks pattern is appropriate for the abdomen-obese men. Also, the new slacks pattern was evaluated allowing proper space length of waist, abdomen and hip. Virtual models of production through data from a 3D body scan, pattern draft and virtual garment digital program were applied to a prototypic design method in order to enhance the fitness of ready-made garments. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.

• The KIPS Transactions:PartB
• /
• v.11B no.6
• /
• pp.683-690
• /
• 2004

Garment modeling and simulation is now one of the important elements in broad range of digital contents. Though there have been recent products on garment simulation, general users do not know well enough how to design a virtual costume that meets some requirements about its specific clothing pattern. In particular, Hanbok - the Korean traditional costume - has many different characteristics against western ones in the aspect of its pattern design and of draping. This paper presents a knowledge-driven approach for virtual Hanbok modeling without knowing how to make real Hanbok. First, parameterized knowledge for several fabric types art solicited using visual similarity assessment from simulated and real cloth. Secondly, based on the analysis of designer's knowledge, we defined multi-level adjustment processes of Hanbok measurements with regard to body shape features for different virtual actors. An experimental system is developed as the form of a Maya plug-in and the result shows the applicability of the proposed method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.6
• /
• pp.631-640
• /
• 2012

This research project investigates the differences of various body locations (between 3D body models) and drapes garments digitally onto 3D body models. Three different subject models will be given explication. It consisted of (1) data collection of three-dimensional scans (2) creation of 3D body representations (3) comparison of avatar shapes and measurements (4) visualization and assessment of 3D body models and their 3D virtual garments. The study tests a theory of impact by differences in avatars by pattern design. A visual inspection of avatars showed clear differences between the six avatar types (in the generating process); however, there was notably less difference between 3D garment simulations based upon the six avatars produced. This demonstrated that there was less influence on the 3D garments than was predicted after a visual inspection of the avatars.

• Fashion & Textile Research Journal
• /
• v.14 no.1
• /
• pp.83-89
• /
• 2012

Recent rapid development of computer, information communication and Web service technologies is exerting considerable effects on all industrial areas. As such digital technologies are also introduced to the clothing and fashion industry and create 'virtual garment environment' consisting of 3D virtual bodies, virtual garments and virtual try-on systems, consumers are now able to try virtual garments on their virtual body online. This study was conducted in order to analyze consumers' tendency of clothing purchase using 3D virtual simulation technology, which is increasing attention throughout the world, and to propose strategies on the development of virtual try-on technology for activating apparel online shopping. The subjects of this study were men and women aged 18 or older living in the North Carolina State, U.S., and a questionnaire survey was conducted with them on their tendency of apparel online shopping and their preference for real garments and virtual garments. According to the results of this study, consumers' awareness of apparel shopping using virtual try-on was still low. Moreover, in the results of surveying consumers' purchase preference for real garments and virtual garments, preference was highest for real garment (P), which was followed by virtual garments OA, OB and BB. Based on the results of this study, for the activation of apparel online shopping using virtual simulation technology, it is considered necessary to provide services implementing virtual try-on similar to consumers' actual try-on. This requires further active research and technology development on virtual try-on simulation using digital technologies.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.123-130
• /
• 2007

본 논문에서는 기존 패턴캐드시스템 및 드레이핑시스템을 이용한 의복제작과정의 한계점과 개선가능성에 대해 알아보고, 이를 기반으로 새로 디자인한 의복제작시스템을 소개한다. 이 시스템은 원피스, 바지, 셔츠, 재킷 등 옷의 큰 스타일인 의복템플릿으로부터 의복디자인을 시작 한다. 소매, 카라, 포켓, 넥라인과 같은 템플릿 디테일들은 디자이너가 마음대로 다른 세부 템플릿들과 교체할 수 있으며, 세부 템플릿으로 커버할 수 없는 디테일한 수정은 3D 드레이핑 시스템과 2D패턴에디터에서의 직관적인 오퍼레이션을 통해 이루어진다.

• Fashion & Textile Research Journal
• /
• v.17 no.3
• /
• pp.421-428
• /
• 2015

This research is to understand customer satisfaction with virtual fitting based on a 3D body scanner and avatars as well as differences between avatars and the 'real me'. To this end, this research examined Korean college students to facilitate 3D body scanning, avatar generation and surveys. The author used 3D body scan data with direct measurements to identify differences between the 3D body scan data-based 'my avatar' and 'real me' in the virtual dress fitting system. The survey results on 'the level of customer awareness on 3D body scanner' found that the majority of both genders did not know about it and indicated a lower usability to incorporate IT technology into the fashion industry. The question in the 3D body scanning and avatar found an affirmative attitude. Satisfaction levels on the 3D avatars' similarity with 'own body' and garment fitting were positive and indicated a need for further technological improvements to express the avatars identical to customers' own body. More research is necessary for the accuracy of sizes for 3D body scanning that measure body sizes while wearing clothes. Avatars based on such datamay be less similar to 'own body' and cause customer dissatisfaction. Thus, further technology development is required to narrow gaps using data to make avatars that provide more accurate virtual fitting simulation services to customers.

• Journal of Fashion Business
• /
• v.21 no.6
• /
• pp.87-105
• /
• 2017

In the fashion industry, 2D apparel CAD technology has already matured and various 3D apparel CADs have been introduced and are available for users. In the fourth industrial revolution era, the 3D apparel technology will be highlighted, and the research of 3D apparel CAD will be much more emphasized upon. Currently, various 3D apparel CAD have been developed and commercialized due to the rapid development of technology. However, in reality, the analysis and discussions about its problems and the improvements for clothing from a user's perspective have not been carried out yet. The purpose of this study was to provide the reference information about 3D apparel CAD for users by studying and comparing the characteristics of 3D apparel CAD. The 3D apparel CAD, DC Suite and CLO3D were selected for technical comparative study. The 3D apparel CAD mainly includes 3D body system, garment pattern system and garment simulation system and so on. It was compared and analyzed; the problem was presented, and the directions of improvement were put forth.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.3
• /
• pp.163-178
• /
• 2014

In America, where obesity rate ranks no.1 in the world, the plus size market is rapidly expanding with various American brands adding plus size lines in a way to diversify their products. As obesity is expanding throughout the younger generation, the necessity to develop products according to different characteristics of body shape that can fulfill the needs of young plus size consumers is being emphasized. In this study of young plus size, our focus is on providing wider spectrum of design choices for consumers by analyzing different body shapes, categorizing them, and then identifying the differences of design among them. More specifically, the object of this study is to analyze the elements that differentiate the designs from each other by virtually trying out the same item on avatars of various body shapes. Thus, we can identify the elements that needs to be differentiated according to different body shapes after implementing virtual fitting program on plus size shapes that are rather difficult considering the reality of domestic fashion companies. In this way, we are able to provide fundamental data for American plus size fashion market and design development for Korean fashion companies that are under way of entering or planning to enter the American market. Furthermore, this will demonstrate the actual details of the designs that will eventually help the development of specialized product for the globalization of Korean fashion industry.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.1
• /
• pp.103-114
• /
• 2001

In Korean clothing industry, most of the womens wear is manufactured by subcontractors. Because womens fashion is getting more rapidly changing, subcontractors production run of each orders is getting shorter too. Also the volume of each order is quite small compare to mens or childrens. So subcontractors are always in a hurry to adjust their production capacity to new order. Therefore they cannot afford to plan production line and allocate works efficiently enough to manufacture competitive products in terms of cost, lead time, as well as quality. The purpose of this study is to suggest a production planning model for womens apparel manufacture, which are relevant to the situation of Korean clothing industry.