• Journal of Power System Engineering
• /
• v.16 no.3
• /
• pp.64-68
• /
• 2012

Because the magnetic bearing supports levitating body without contact, wear, noise and vibration are very small comparing with mechanical bearings, it is very useful to high revolution machinery. In general, the magnetic attractive force function that is proportional to square of control current(x), and inversely proportional to square of an air gap(i) has been widely used. This paper proposed the new magnetic attractive force function that is proportional to cube of the control current, and inversely proportional to square of the air gap. The function was optimized to minimize the cost function that is the percentage of deviation about the change of a proportional constant(k), using the experimental data, ie, control currents and air gaps.

• Journal of Korean Medicine Rehabilitation
• /
• v.18 no.4
• /
• pp.25-37
• /
• 2008

Objectives : Ohyaksungi-san(Wuyaoshunqi-san) has been used for many years as a treatment for sciatica in oriental medicine. And electrical acupuncture also has been used as a treatment for sciatica in recent study. By the way, it is hard to find the study that apply two treatments in the same time. This study was designed to evaluate the effects of Ohyaksungi-san(Wuyaoshunqi-san) and electrical acupuncture on nerve regeneration after crush injury in rat sciatic nerve in the same time. Methods : This study was designed with 4 subgroups to evaluate the effects of Ohyaksungi-san(Wuyaoshunqi-san) and electrical acupuncture on nerve regeneration. As control groups, group I has not been treated during 3 weeks after crush injury in rat sciatic nerve. Group II has been treated Ohyaksungi-san(Wuyaoshunqi-san), Group III has been treated electrical acupuncture, and Group IV has been treated both during 3 weeks. This study has been estimated sciatic function index and change of GAP-43 immunoreactivity about sciatic nerve regeneration. Results : 1. The test for nerve regeneration had significantly good result of sciatic function index in the experimental groups as compared with control groups(p<.05). Especially, Group IV has the greatest result of sciatic function index. 2. GAP-43, the marker of nerve regeneration, more increased in the experimental groups as compared with control groups. Especially, Group IV has the greatest result of GAP-43. Conclusions : Ohyaksungi-san(Wuyaoshunqi-san) and electrical acupuncture have good effects on nerve regeneration after crush injury in rat sciatic nerve.

• Coupled systems mechanics
• /
• v.2 no.2
• /
• pp.147-157
• /
• 2013

We numerically investigate the electronic band structure of carbon nanotubes (CNTs) under radial corrugation. Hydrostatic pressure application to CNTs leads to a circumferential wave-like deformation of their initially circular cross-sections, called radial corrugations. Tight-binding calculation was performed to determine the band gap energy as a function of the amplitude of the radial corrugation. We found that the band gap increased with increasing radial corrugation amplitude; then, the gap started to decline at a critical amplitude and finally vanished. This non-monotonic gap variation indicated the metal-semiconductor-metal transition of CNTs with increasing corrugation amplitude. Our results provide a better insight into the structure-property relation of CNTs, thus advancing the CNT-based device development.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.11
• /
• pp.479-486
• /
• 1986

It is necessary to consider a rotor movement in dynamic analysis on the flux distribution of electric machinery by FEM. Therefore, if air-gap domain was subdivided into triangular elements, computation results contain errors due to variation of element shape in air-gap because the nodal points corresponding to the rotor are displaced in analyzing domain for the time difference. In order to reduce this errors, the paper presents a application of a Macro Air-gap Element that interpolation function is obtained analytically and a means to join it with linear triangular elements in the rotating machine or in the linear machine. At the end of paper, setting up analytic domain model, it compares analytic solution with the computation results of Macro Air-gap Element appliction and that of linear triangular element subdivision only to each cases of nodal displacement. And it carries out that errors due to variation of element shape are reduced effectively by application of a Macro air-gap element.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.210-213
• /
• 2005

This article describes an estimate method of the spark plug gap by measuring breakdown voltage. Breakdown voltage is the function of spark plug gap, pressure, temperature and humidify. However. It is dominated mainly by the spark plug gap. This technique is applied to in-line process test of the spark plug gap in automobile engine production. Breakdown voltage of normal spark plugs slightly scatters in ordinary conditions and if there is dust or burr in the gap, breakdown voltage gets lower. This technique saves repairing time for bad spark plug and attributes to improve the quality of automobile engine.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.7
• /
• pp.643-655
• /
• 1991

The analysis method on air gap permeance distribution, air gap MMF distribution, air gap flux density distribution, cogging torque and BEMF about the skewed stator slots or the skewed rotor magnet segments for BLDCM, respectively, is studied as a function of the skew ratio. The proposed method describes the differences between the skewed stator slots and teh skewed rotor magnet segments for the air gap permeance distribution, air gap MMF distribution and air gap flux density distribution. The reliability of the method is also confirmed by the waveform of the cogging torque and BEMF through experiments. And the result shows that the effects on the cogging torque and BEMF due to the skewed stator slots or the skewed rotor magnet segments are the same. In case of the skewed stator slots, the effects of the variations of the winding resistance and inductance are also studied.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.9
• /
• pp.693-699
• /
• 1998

In this work $Cd_4GeS_6:Co^{2+}$(0.5mole%) single crystals were grown by the chemical transporting reactiov(CTR) method using high purity(6N) elements. The grown single crystals crystallized in a monoclinic structure(space group Cc). The direct optical energy gap of this single crystals was found to be 2.445eV at 300K and the temperature dependence of optical energy gap was fitted well to Varshni equation. But at temperatures lower than 70K an anomalous temperature dependence of the optical energy gap was obtained. This anomalous temperature dependence accored well with the anomalous temperature dependence of the unit cell volume. Also, the entropy, enthalpy and heat capacity were deduced from the temperature dependence of optical energy gaps.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1027-1028
• /
• 2007

In this paper, the variation of air-gap field intensity caused by the slot-opening in interior permanent magnet (IPM) motor is investigated, which is for predicting the instantaneous magnetic field more preciously in analytical method further. It is different with the approach of dealing the slot-opening effect on the air-gap field distribution with the "relative permeance" function in surface permanent magnet (SPM) motor. The prediction of the air-gap field in IPM motor is much more complex than SPM motor. In this study, an approximate estimation method is adopted based on analyzing the changing of flux path in both the IPM rotor part and stator part, and in additional an analytical function defined as "relative pole-arc" is built. The finite element method(FEM) is used for confirming the slot-opening effect on the field prediction.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.10a
• /
• pp.539-544
• /
• 1998

Generally, welding gap is a serious factor of a falling-off in weld quality among various kind of weld defect. Welding gap is created between two work piece in GMAW(Gas Metal Arc Welding) of horizontal fillet weld because surface of workpiece is not flat by cutting process. In these days, there were many attempts to detect welding gap. though we prevalently use the vision sensor or arc sensor in welding process, it is difficult to detect welding gap for improvement of welding quality. But we have a trouble to find relationship between welding gap and many welding parameters due to non-linearity of welding process. As mentioned about the various difficult problem, we can detect welding gap precisely using neural networks which are able to model non-linear function. Also, this paper was proposed real-time monitoring of weld bead shape to find effect of welding gap and to estimate weld quality. Monitoring of weld bead shape examined the correlation of welding parameters with bead eometry using learning ability of neural networks. Finally, the developed system, welding gap detecting system and bead shape monitoring system, is expected to the successful capability of automation of welding process by result of simulation.

• The Journal of Fisheries Business Administration
• /
• v.39 no.3
• /
• pp.25-47
• /
• 2008

The Fishing Communities (so-called Uchongae) in Korea was legally established in 1962. It has been gradually expanded by quantity, and we have total 1,969 communities in 2006. The major establishment purpose of Uchongae was put 2 functions. The first function is to make up the double industry structure in coastal region, and second function is to make economical condition for Uchongae. Nevertheless the Fishing Communities System in Korea was not successfully developed after first beginning. The Income gap have become heavily between fishing area and non - fishing area, including agricultural area. The income gap has been due to rapid industrialization and urbanization in Korea. And the income gap even have become heavily among Uchongaes. In this paper, It have been researched the degree of Income inequality among Uchongaes in Korea during 1986-2006. The income inequality degree was analyzed by Gini coefficient and Mean Log Deviation (MLD) using Lorenz Curve. According to analysis result, the Gini coefficient of Uchongaes in Korea has been about 2-times high from 0.0847 to 0.1770 during 20 years. And the MLD has been 5.4 times from 0.0125 to 0.0679 during same periods. This means to more wide the general Income Inequality among the Uchongaes in Korea. Especially, It means to more wide the gap of high ranking Uchongaes and low ranking Uchongaes that MLD index multiplier has been more high.