• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.1036-1041
• /
• 1997

The objective of this study is to adjust the roll gap for the dimension accuracy of bar in hot bar rolling process considering roll wear. In this study hot bar rolling processes for round and oval passes have been investigated. In order to predict the roll wear, the wear model is reformulated as an incremental form and then wear depth of roll is calculated at each deformation step on contact area using the results of finite element analysis, such as relative sliding velocity and normal pressure at contact area. Archard's wear model was applied to predict the roll wear. To know the effects of thermal softening of DCI (Ductile Cast Iron) roll material according to operating conditions, high temperature micro hardness test is executed and a new wear model has been proposed by considering the thermal softening of DCI roll expressed in terms of the main tempering curve. The new technique developed in this study for adjusting roll gap can give more systematically and economically feasible means to improve the dimension accuracy of bar with full usefulness and generality.

• Korean Journal of Organic Agriculture
• /
• v.29 no.3
• /
• pp.333-358
• /
• 2021

This study investigates consumers' purchasing behavior and perception of the low-carbon certificated agricultural product. To this end, we surveyed 1,000 consumers and the main findings are as follows. First, Even after six years of national certification, it is important to promote the low-carbon certification system due to insufficient awareness and purchase experience. Second, the certificated area is small at around 5% of the area of environment-friendly agricultural products and GAP certification, and certification is concentrated on fruit trees. Third, an appropriate level of high-priced strategy can be useful considering the cost of low-carbon certification, image management of low-carbon certificated agricultural products, and quality is the most important factor for consumers to consider when purchasing fresh agricultural products. Fourth, consumers recognized that the contribution of low carbon certification in reducing greenhouse gas emissions and preserving the environment was higher than that of environment-friendly agricultural products or GAP certification. Considering that, promotional activities linked to environment-friendly agricultural products and GAP certification may be effective when promoting low-carbon certification. Finally, the Ministry of Agriculture, Food and Rural Affairs is implementing a carbon point system linked to Green Card to revitalize low carbon certification, but 25.7% of consumers are aware of it, and 8.4% have little experience in issuing it.

• Journal of Environmental Impact Assessment
• /
• v.20 no.1
• /
• pp.1-11
• /
• 2011

This study was carried out to suggest the baseline data necessary for vegetation restoration at riverine wetland within stream corridor. We used the prevalence index for wetland assessment by applying the method of weighted averages with index values based on five hydrophyte indicator status as defined by estimated probability occurred in wetland. We selected near nature and urbanized reach of Gap and Yanghwa streams as experimental site. Although two sites have some different disturbance and characteristics of watershed, they showed that similarity of vegetation community including three dominant species - Salix koreensis, Phragmites communis, Miscanthus sacchariflorus - was very high. But in case of Yanghwa stream, various kinds of emergent plants along wetted condition were distinctly occurred, resulted from difference of hydrological regime and substrate, etc. Degree of naturalness of vegetation at the sampled areas indicated that near nature area of Gap stream and all area of Yanghwa stream were fitted as riverine wetland, while urbanized area of Gap stream has changed into upland condition. In conclusion assessment system using prevalence index would be considered an effective method for evaluating of natural states of riverine wetland, but further integrated consideration of physical, hydrological, and biological factors of stream process, and also with considering the difference between those qualitative data of vegetation community.

• The Korean Journal of Ecology
• /
• v.19 no.6
• /
• pp.499-506
• /
• 1996

Forest stand development in Kwangnung Experimental Forest, Korea, was simulated with a forest succession gap model of the JABOWA/FORET type, in order to predict climax species and characterime the trend of community structure along the succession. The model runs for a period or 1, 000 yr and is based on the averaged successional characteristics of 50 forest plote with an individual size or 1/12 ha gap consisted of the 15 major tree species. The total bimass and leafarea index have arrived at a steady state since about 200 yr and these values are smaller than that or field survey. Carpinus cordata, C. laxiflora, Quercus mongolica and Q. serrata were epected to be climax species that represent about 86% or total biomass in later stage and these results coincided with the previous succession studies from field survey in the area.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.84-89
• /
• 2004

When the tube contacted to support, anti-vibration bar of the steam generator in nuclear power plant, the contact area is worn out by their relative displacement and contact force. Connors and Au-Yang found the relation between tube worn displacement and volume, or normal work rate at given gap size. The present analysis is obtained the relation between tube worn displacement and normal work rate at various gap size modifying Au-Yang's result. The results are compared with Connors and Yettisir and Pettigrew's results. The comparison shows that Yettisir and Pettigrew result is fairly good agreement with Connors and present results with gap clearance, 0.015in.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.55-60
• /
• 2008

Turbulent flow characteristics on the gap of two parallel channels are investigated using LES(large eddy simulation) approach. Two parallel channels have the same cross-section area and are connected by the narrow channel named the gap. Turbulent flow near the gap makes the flow pulsation along the streamwise direction of two channels. The flow condition is the Reynolds number of $2.5{\times}10^{-5}$. We compared the predicted results with the previous experimental results and presented the axial mean velocity, turbulent intensities, Reynolds shear stresses and turbulent kinetic energy.

• Journal of Technologic Dentistry
• /
• v.39 no.4
• /
• pp.235-242
• /
• 2017

Purpose: The aim of this study was to evaluate the marginal and internal gap of zirconia copings fabricated by CAD/CAM system and to research the effect of cement space on the fit of zirconia prosthesis. Methods: Zirconia copings were designed using 3shape software and then milled from presintered zirconia blocks by Kavo dental milling machine. The cement space was set at $0{\mu}m$ around the margins for all groups, and additional cement space appling 1 mm above the finish lines of tooth. The samples were classified into 4 groups according to the cement space setting(Cs-0, Cs-40, Cs-80, Cs-120). Replica technique used to investigate marginal and internal gap. The silicone film thickness was recorded using a optical microscope with image software analysis system at 75${\times}$magnification. The assessment performed on the six points in bucco-lingual and mesio-distal sections(4 groups, 10 copings per group, 12 measuring points per coping). The data were statistically analyzed with one-way ANOVA followed by pair-wise Tukey's post hoc tests(${\alpha}$<0.05). Results: Better marginal and internal fit values were exhibited by $80{\mu}m$ cement space. The results showed that different cement space values had statistically significant effect on the marginal and internal gap of zirconia copings(p<0.001). The gap of margin and axial wall area was smaller than that the gap of occlusal area in all groups(p<0.001). Conclusion : Effect of different cement spaces on the marginal and internal gap of zirconia copings.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.8
• /
• pp.1422-1428
• /
• 2008

In the current PDP technology, one of the most important issues in AC PDP is improvement of luminance and luminous efficacy. To improve luminance and luminous efficacy, new cell structure of PDP containing long discharge path is necessary. However, it causes an increment of firing voltage. In order to decrease firing voltage of AC PDP having long discharge gap, the protrusion electrode is proposed. To drop the firing voltage, the protrusion electrode is inserted into the forward area of the main discharge gap. This paper presents measurements of detailed optical and electrical characteristics of AC PDP with protrusion electrodes. The experimental results show that the proposed structure with gap 80um has lower firing voltage to 27V than that of the conventional long gap structure. Moreover, the ICCD(Intensified Charge Coupled Device) images of the proposed structure show quick discharge generation by 0.07usec and longer continuation by 0.05usec than that of the conventional long gap structure. Therefore, the proposed protrusion electrodes have higher luminance by 12.5% than that of the conventional structure, as having no decrement of Luminous efficacy.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.06a
• /
• pp.34-41
• /
• 2000

Surface roughness plays a significant role in friction, wear, and lubrication in machine components. Most engineering surfaces have the nongaussian distrubution. So, in this study, contact simulation are conducted for not only gaussian surfaces but also nongaussian surfaces. Nongaussian rough surface censidering the kurtosis is generated numerically, And the effects of kurtosis on real contact area fraction, average gap, and mean asperity contact pressure are studied. It will be shown that the real contact area fraction and the mean asperity contact pressure are sensitive to the characteristics of surface geometry according to kurtosis.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.53-60
• /
• 2001

Surface roughness plays a significant role in friction, wear, and lubrication in machine components. Most engineering surfaces have the nongaussian height distribution. So, in this study, contact simulations are conducted for not only gaussian surfaces but also nongaussian surfaces. Nongaussian rough surface considering the kurtosis is generated numerically And the effects of kurtosis on real contact area fraction, average gap, and mean asperity contact pressure are studied. It will be shown that the real contact area fraction and the mean asperity contact pressure are sensitive to the characteristics of surface geometry according to kurtosis.