• Journal of Labour Economics
• /
• v.42 no.1
• /
• pp.43-72
• /
• 2019

As a result of decomposing the wage gap between large enterprises and SMEs using Oaxaca's wage gap decomposition method, the total wage gap of supply side factors was 44.2%, and the service years and educational background were the biggest influences. and As a result of decomposing the wage gap by firm size based on demand side factors such as business performance, total wage gap was 44.9%, and the influence on wage gap was in the order of labor productivity, union and outsourcing ratio. The results of this analysis suggest that it is necessary to consider the demand side factors such as business performance and capital structure of supply side companies such as differences in human capital in order to solve wage gap by firm size.

• Applied Chemistry for Engineering
• /
• v.21 no.4
• /
• pp.377-384
• /
• 2010

We perform a comparative study to investigate the properties of the new energetic chain extender (AzPD). A series of poly(glycidyl azide)/poly(tetramethylene oxide)-based energetic segmented polyurethane (GAP/PTMG ESPU) with different chain extender, which is 3-azidopropane-1,2-diol (AzPD), 1,4-butane diol (1,4-BD), or 1,5 pentane diol (1,5-PD), was synthesized by solution polymerization in dimethyl formamide (DMF) and their phase behaviors were investigated. The ESPUs were characterized with Fourier transform infrared-attenuated total reflection spectroscopy (ATR FT-IR), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). The results of the ATR FT-IR analysis of the urethane carbonyl group region showed that the 'free' C=O fraction was higher in GAP/PTMG AzESPU (0.5) than GAP/PTMG BDESPU (0.44) and GAP/PTMG PDESPU (0.41) for 7 days samples after preparation and that it was similar in the range of 0.26~0.29 for three 60 days ESPU samples. DMA curves of the GAP/PTMG AzESPU for 7 days samples showed amorphous polymers, but GAP/PTMG BDESPU and GAP/PTMG PDESPU showed viscoelastic behaviors with rubbery plateau and the flow region. However, DMA curves of the GAP/PTMG AzESPU for 60 days samples showed viscoelastic behaviors with rubbery plateau and the flow region like GAP/PTMG PDESPU, but GAP/PTMG BDESPU did not show the flow region. From phase behaviors with ATR FT-IR, DSC and DMA analysis, GAP/PTMG AzESPU showed good phase-mixing between components. However, it represented viscoelastic behavior of TPE similar to GAP/PTMG PDESPM according to phase equilibrium progress with aging time.

• Nonlinear Functional Analysis and Applications
• /
• v.29 no.1
• /
• pp.15-33
• /
• 2024

In this article, we considered a class of nonlinear variational hemivariational inequality problems and investigated a gap function and regularized gap function for the problems. We discussed the global error bounds for such inequalities in terms of gap function and regularized gap functions by utilizing the Clarke generalized gradient, relaxed monotonicity, and relaxed Lipschitz continuous mappings. Finally, as applications, we addressed an application to non-stationary non-smooth semi-permeability problems.

• Archives of Pharmacal Research
• /
• v.19 no.4
• /
• pp.264-268
• /
• 1996

Panax-ginseng saponin has been known to exert various pharmacological effects on cellular metabolism. This study was performed to determine the effect of ginseng saponin on gap junction channel-mediated intercellular communication, using an established in vitro system of reconstituted gap junction channels. Gap junction channels are a specialized plasma membrane fraction, which are permeable to relatively large water-soluble molecules. The sucrose permeable property of reconstituted gap junction channels was completely inhibited with 0.1 % (w/v) of ginseng saponin. We also compared the effect of ginseng saponin with that of Triton X-100, a nonionic detergent, on the same system. Triton X-100 showed significantly different effect on sucrose-permeability of gap junction channel from that was affected by ginseng saponin. The structures of liposomes containing gap junction channels was significantly destroyed by Triton X-100.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.2 s.152
• /
• pp.101-110
• /
• 2007

Recently, rudder erosion due to cavitation frequently has occurred at large high speed container carriers. Especially, in the case of a horn-type rudder, the rudder erosion is severe around a gap. The gap-flow characteristics are investigated through a computational method to understand the effects of a gap on the cavitation and rudder efficiency. A viscous flow theory utilizing a cavitation model is applied to calculate the flow around idealized 2-dimensional rudder sections in a full scale. The effects of gap clearance and flow-control projection are also investigated. From the computational results, the mass flow rate through a gap is found to be one of the important parameters to affect the cavitation and rudder efficiency.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.9
• /
• pp.1571-1576
• /
• 2007

This report describes the analytical characteristic of sinewave air gap flux density for the brushless AC motor with surface permanent magnet. The analysis of sinewave air gap flux density is the key to expect the performance of back EMF for the design of brushless AC motor. The numerical analysis and FEM analysis are performed to adopt radial and parallel flux magnetization of magnet on the rotor. And it is also executed to vary the magnet arc angle and arc radius for the condition of constant and non constant air gap. This report is focused on the characteristic of sinewave air gap flux density for permanent magnet of surface brushless AC motor. This results also have more reliable data against the previous paper which had the representative numerical analysis of air gap flux density[1][2].

• Journal of Korean Society of Transportation
• /
• v.4 no.2
• /
• pp.3-14
• /
• 1986

This study was undertaken to develop the gap acceptance model of left-turn drivers on the major road at intersections. Typical unsignalized intersections on the two-lane and four-lane streets in Masan City were selected for the study intersection. For the gap distribution model, the lognormal, negative exponential, shifted negative exponential, and Gamma distributions were tested using the x2 and K-S tests. Based on the results for both streets, it was concluded that among the distributions tested the lognormal distribution represented the gap distribution best, followed by the shifted negative exponential distribution. Stochastic models of the gap-acceptance behavior of left-turn drivers on the major road at unsignalized intersections were programmed using SLAM Ⅱ, a simulation computer language. A stochastic model was selected for the gap-acceptance behavior to compare the results of the simulation with the observed data. The model assumes that a fixed critical acceptance gap is assigned to each left-turn driver based on a normal distribution and the gap distribution of the opposing traffic stream follows the shifted negative exponential distribution.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.4
• /
• pp.705-716
• /
• 2014

This study starts from a question about the expectation that government policy reduces the educational gap by introducing digital textbooks. In addition, we try to figure out how to minimize the problems that will occur when digital textbooks are introduced and fully adopted. The purpose of this study is exploring the possibility that suing digital textbook deepens learning gap among students. Researchers are discussed that the gap between 'information' haves' and 'information' have-nots' and between 'the competent user' and 'the incompetent user' increase difference between 'knows' and 'know-nots' on the socio-economic class. These difference are likely to imply that using digital textbook is deepening the educational gap.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.142-143
• /
• 2001

Cell gap은 LCD(Liquid Crystal Display)의 중요한 파라미터들 중의 하나이다. cell gap이 LCD의 광학적인 성능에 영향을 주기 때문에 정확한 cell gap 측정방법은 제조공정을 향상시키는데 중요하다 특히 최근 고속 영상 디스플레이를 제공할 수 있는 장점 때문에 낮은 cell gap의 LCD가 요구되고 있는 시장 추세에 따라 낮은 cell gap을 측정할 수 있는 기술이 요구되고 있다. LCD의 cell gap 측정 방법들 가운데 가장 보편화되어 있는 것으로 회전편광자법(rotating polarizer method)[1, 2]과 위상보상법(phase compensation method)[3,4]을 들 수 있는데 낮은 셀갭을 정확히 측정하기가 어려우며 주기적인 해가 발생한다는 단점이 있다. (중략)

• Management & Information Systems Review
• /
• v.20
• /
• pp.61-83
• /
• 2007

This study estimates gender wage gap by the Korean industries. The empirical findings are as follows: 1. The sex segregation by industries has not improved. 2. The average wage in $\ulcorner$electricity, transportation, warehousing, financial institutions$\lrcorner$ is relatively higher than others. On the contrary, the average wage in $\ulcorner$mining and manufacturing$\lrcorner$ and $\ulcorner$wholesale and retail, food, loading$\lrcorner$ is relatively lower than others. 3. The gender wage gap in $\ulcorner$electricity, transportation, warehousing, financial institutions$\lrcorner$ is relatively lower than others. On the contrary, the gender wage gap in $\ulcorner$mining and manufacturing$\lrcorner$ is relatively higher than others. The gender wage gap has declined annually. The gender wage gap in industries with lower wage level is higher. The decline of gender wage gap cannot be interpreted as a relaxation of sexual discrimination.