• Fibers and Polymers
• /
• 제1권2호
• /
• pp.67-70
• /
• 2000

Rosin maleic anhydride adduct (RMA)-bisester was prepared by the esterification of chlorinated RMA with hydroquinone. Phenylpyridinylcyclot.isiloxane ($D_3^{Ph,Py}$) was synthesized from phenylpyridinyldichlorosilane in the presence of zinc oxide catalyst, and amino group terminated polyphenylpyridinylsiloxane prepolymer was prepared by equilibrium polymerization of $D_3^{Ph,Py}$ with 1,3-bis(3-aminopropyl)-1,1,3,3-tetramethyldisiloxane. Rosinimide (PSMR) was prepared from the imidization of RMA-bisester with polyphenylpyridinylsiloxane prepolymer at 12$0^{\circ}C$ for 7 h using ${\gamma}$-butyrolactone/pyridine. It showed that PSMR had better thermal stalbility than rosinimide modified with polydimethylsiloxane.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.871-874
• /
• 2007

We have synthesized a novel fully soluble and low-temperature processable polyimide gate insulator (KSPI) through one-step condensation polymerization. For the preparation of KSPI, 5- (2,5-dioxytetrahydrofuryl)-3-methly-3-cyclohexene- 1,2-dicarboxylic anhydride (DOCDA) and 4,4- diaminodiphenylmethane (MDA) were used as monomers and fully imidized KSPI was completely soluble in organic solvents like ${\gamma}-butyrolactone$ and 2-butoxyethanol, etc.

• 약학회지
• /
• 제31권5호
• /
• pp.338-342
• /
• 1987

8-tert-Butyl-6,7-dihydro-5-methyl-8H-pyrrolo [3,2-e]-s-triazolo [1,5-a] pyrimidine (Bumepidil), one of the s-triazolo [1,5-a] pyrimidine derivatives, has been recently found to be the most promising potential coronary vasodilator and antihypertensive agent. In this report, a new synthetic approach for Bumepidil, via direct N-amination of amino pyrimidine intermediate, was studied and found to be useful method. The novel synthetic method comprise the following steps, acylation of $\gamma$-butyrolactone, condensation with guanidine, direct N-amination, cyclization, chlorination, and finally cyclization using tert-butyl amine.

• 한국연초학회지
• /
• 제23권1호
• /
• pp.40-44
• /
• 2001

This study was carried out to investigate relationship between contents of moisture and chemical components in burley tobacco after heat treatment. Initial moisture contents of burley tobacco was 32% after cutting and casing. Burely cut tobaccos were treated at various temperature(10$0^{\circ}C$, 13$0^{\circ}C$, 145$^{\circ}C$ and 16$0^{\circ}C$) and time(0, 5, 10, 15, 20 and 30 min) in mechanical convection oven. Moisture contents of burley tobacco after heat treatment were in the range of 1.9% to 18.4%. Relationship between moisture contents and total sugar, pH, total volatile base, ammonial, L value of color, nicotine, nornicotine, and $\beta$-nicotyrine contents were positively correlated. Correlation between moisture contents and crude ash, ether extracts, 2,6-deoxyfructosazine, 2,5-deoxyfructosazine, a value of color, citric acid, m-xylene, ${\gamma}$-butyrolactone and 5-methyl-2-furfural were negative.

• 전기화학회지
• /
• 제17권1호
• /
• pp.26-29
• /
• 2014

The corrosion behavior of stainless steel 304 (SS 304), titanium, nickel and aluminium is studied by immersion and anodic polarization tests in non-aqueous electrolytes. Tetraethyl ammonium tetrafluoroborate is used as a supporting electrolyte in the three kinds of solvents. The immersion test shows that chemical corrosion rate in propylene carbonate-based electrolyte is lower than those in acetonitrile- or ${\gamma}$-butyrolactone-based electrolytes. Surface analyses do not reveal any corrosion product formed after the immersion test. In the anodic polarization tests, a higher concentration of supporting electrolyte gives a higher current density. In addition, a higher temperature increases the current density in the active region and reduces the potential range in the passive region. SS 304 shows the highest corrosion potential while Al shows the lowest corrosion potential and the highest current density in all studied conditions. Based on the conducted corrosion tests, the corrosion resistance of metal substrates in the organic solvents can be sorted in descending order as follows: SS 304 - Ti - Ni - Al.

• Journal of Microbiology and Biotechnology
• /
• 제10권4호
• /
• pp.535-538
• /
• 2000

Streptomyces lavendulae FRI-5 produces the ${\gamma}$-butyrolactone autoregulator IM-2, which is required for nucleoside antibiotic producetion. We have developed a system for introducing DNA into S. lavendule FRI-5 via conjugal transfer from Esherichia cole. Conditions were established for conjugation of the oriT-and attP-containing plasmid pSET152 from E. coli ET12567 (pUZ8002) to FRI-5. Conjugation resulted in integration of the plasmid at the chromosomal C31 attB site. The frequency of intergeneric conjugation varied with the medium used. The highest frequency ($1.6\times10-5$ per recipient) was obtained on ISP medium 2 containing 10mM MgCl2. Southern blot and phenotypic analyses of exconjugants revealed that S. lavendulae FRI-5 contains a unique C31 attB site, and that integration of heterologous DNA into the attB site did not interfere with morphological differentiation or IM-2-dependent signal transduction, including the production of a blue pigment. This system will now enable detailed genetic analysis of the regulation of antibiotic production in S. lavendulae FRI-5.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.220-224
• /
• 2009

The effect of addition of single and binary additives on the performance of dye-sensitized $TiO_2$ solar cells based on 1,2-dimethyl-3-propylimidazolium iodide (DMPII) in ethylene carbonate (EC) and gamma-butyrolactone (GBL) has been evaluated at different cell temperatures in the $30-120^{\circ}C$ range. The electrolyte containing a single additive, 2-(dimethylamino)-pyridine (DMAP) showed best performance, which showed further enhancement for an electrolyte containing binary additives, DMAP and 5-chloro-1-ethyl-2-methylimidazole (CEMI) in equal molar ratio. The performance of the dye sensitized solar cell (DSC) based on electrolyte containing binary additives were found to be better than an acetonitrile based electrolyte. The dependence of different photovoltaic parameters (Voc, Jsc, ff, n) of the DSC upon temperature has been studied over the $30-120^{\circ}C$ range and only a small decrease in conversion efficiency has been observed. Thus the electrolyte containing binary additives (DMAP, CEMI) in EC/GBL solvent and show better performance in the investigated temperature range ($30-120^{\circ}C$).

• Journal of Electrochemical Science and Technology
• /
• 제8권3호
• /
• pp.257-264
• /
• 2017

A polymeric ionic liquid, poly(1-methyl 3-(2-acryloyloxypropyl) imidazolium iodide) (PMAPII), was synthesized as a single-iodide-ion-conducting polymer and employed in a gel polymer electrolyte. Gel polymer electrolytes prepared from iodine, 4-tert-butylpyridine, ${\gamma}$-butyrolactone, and PMAPII were applied in quasi-solid-state dye-sensitized solar cells (DSSCs). The addition of 16 wt.% PMAPII provided the most favorable environment, striking a compromise between the iodide ion concentration and the ionic mobility, which resulted in the highest conversion efficiency of the resulting DSSCs. The quasi-solid-state DSSC assembled with the optimized gel polymer electrolyte exhibited a relatively high conversion efficiency of 7.67% under AM 1.5 illumination at $100mA\;cm^{-2}$ and better stability than that of the DSSC with a liquid electrolyte.

• 대한안전경영과학회지
• /
• 제2권2호
• /
• pp.95-108
• /
• 2000

Electrochemical charateristics of activated carbon fiber cloth(ACFC) electrode were studied with propylene carbonate(PC), ${\gamma}$-butyrolactone(GBL) and N,N-dimethyl-formamide(DMF) as a solvent and tetraethylammoniumtetrafluoroborate(TEABF$_4$), tetraethylammoniumhexafluorophosphate(TEABF$_{6}$), tetrabutylammoniumtetrafluoroborate(TBABF$_4$) and tetrabutylammonium hexafluorophosphate(TBAPF$_6$) as an electrolytes(active material). The concentrations of electrolytes were in the range of 0.2~1.2 N, the volume ratios of PC and DMF as a mixed solvent system, were 90：10, 80：20, 70：30, 60：40, 50：50, and 40：60 vol%. Electrochemical characteristics such as electric conductivity, internal resistance, and electric capacitance of fabricated unit cells were measured after the moisture of activated material was removed with molecular sieve. Electrochemical characteristics were better in mixed solvents system than in mono solvent system. The mono solvent system of 1.0 N electrolyte of GBL/TEABF$_4$ with activated carbon cloth electrodes showed better result but the mixed solvent system with PC and DMF/TEABF$_4$(50：50 vol%) and the concentration of 1.0 N electrolyte showed the best characteristics. Internal resistance was 3.47 $\Omega$ and specific capacitance was 19.1 F/g respectively.y.

• 미생물학회지
• /
• 제51권1호
• /
• pp.39-47
• /
• 2015

방선균이 생산하는 이차대사산물은 자기조절인자(${\gamma}$-butyrolactone autoregulator)라고 불리는 저분자의 신호전달물질과 이에 특이적으로 결합하는 autoregulator receptor protein의 상호작용에 의해 조절되는 것으로 알려져 있다. 그러므로 non-host에 autoregulator receptor 혹은 pleiotropic regulator의 발현은 이차대사산물 혹은 새로운 대사화합물의 효율적인 생산을 유도할 것으로 기대된다. 희소방선균 Saccharopolyspora erythreae으로부터 receptor (seaR) 유전자의 기능을 연구하기 위해 다른 속의 균주인 Streptomyces coelicolor A3(2)로 seaR 유전자를 삽입하여 형질전환하였다. S. coelicolor A3(2)의 형질전환은 oriT, attP, $ermEp^*$과 seaR gene 단편을 가지고 있는 ${\Phi}C31$ 유래의 integration vector인 pEV615 (6.6 kb)를 이용하여 Escherichia coli ET12567/pUZ8002를 DNA 공여체로 이용한 접합전달법을 사용하여 확립하였다. seaR 유전자의 삽입 유무는 PCR방법으로 확인하였고, seaR 유전자의 전사 발현은 RT-PCR방법으로 확인하였다. S. coelicolor A3(2)의 경우 표현형 microarray 실험을 통하여 seaR 유전자의 발현에 따른 표현형의 변화를 확인하였다. 특히, 표현형 microarray 실험에 나타난 tetracycline 항생제 기질에 대하여 wild type이 transformant에 비해 빠르게 성장하는 것은 항균제 감수성 검사와 일치하였다. 이는 tetracycline 생합성 유전자 및 내성 유전자의 발현 억제에 따른 변화라고 예상할 수 있으며 이를 위하여 tetracycline 생합성 관련 유전자 및 내성 유전자의 발현 패턴 분석등과 같은 분자 수준에서의 연구가 필요할 것으로 생각된다.