• Journal of the Korean Society for Heat Treatment
• /
• v.27 no.1
• /
• pp.15-22
• /
• 2014

This study is to investigate the phase changes and cold workability after isothermal transformation at $780^{\circ}C$ by using the high temperature gas nitrided (HTGN) STS 430 ferritic stainless steel specimens. The phase diagram of STS 430 steel obtained by calculation showed that the phase appeared at $1100^{\circ}C$ showed as ${\alpha}+{\gamma}{\rightarrow}{\gamma}{\rightarrow}{\gamma}+Cr_2N{\rightarrow}{\gamma}+Cr_2N+CrN$ with increasing nitrogen concentration. Also, the transformation of ${\gamma}{\rightarrow}Cr_2N$ during heat treatment isothermally at $780^{\circ}C$, nitrogen pearlite with lamellar type was fully formed at the nitrogen permated surface layer for 10 hrs. However, this transformation was not completed for 1 hr, resulting nitrogen pearlite plus martensite. The cold rolled specimen of isothermally transformed at $780^{\circ}C$ for 10 hrs after high temperature gas nitriding decreased the layer thickness of nitrogen pearlite inducing the deformation of hard $Cr_2N$ phase. the dissolution rate of $Cr_2N$ phase increased rapidly with increasing cold rolling ratio. Specimens with the microstructure of nitrogen pearlite (isothermally transformed at $780^{\circ}C$ for 10 hrs) were possible to cold rolling without crack formation. However, the mixed structures of nitrogen pearlite + martensite (isothermally transformed at $780^{\circ}C$ for 1 hr) were impossible to cold deformation without cracking.

• Journal of the Korean Society for Heat Treatment
• /
• v.16 no.2
• /
• pp.90-96
• /
• 2003

The effect of betatizing temperature on microstructure and transformation characteristics in a Cu-AI-Ni based pseudoelastic alloy fabricated by heated mold continuous casting by using metallography, XRD and calorimetry. The microstructure of cast rod betatized at $600^{\circ}C$ revealed a ${\beta}_1$ parent phase and a ${\gamma}_2$ phase precipitated along the casting direction. When the cast rod was betatized at the elevated temperature above $600^{\circ}C$, the ${\gamma}_2$ phase is completely dissolved into the matrix so that the volume fraction of the ${\gamma}_2$ phase was decreased. The parent phase was stabilized by betatizing at $600^{\circ}C$. However, the ${\beta}_1$ parent phase was transformed to both ${{\beta}_1}^{\prime}$ and ${{\gamma}_1}^{\prime}$ martensites with increasing betatizing temperatures above $600^{\circ}C$, while $M_s$ and $A_s$ temperatures were decreased. The stress-strain curves for compression test were not same with betatizing temperature; the stress-strain curves of the specimen betatized at $600^{\circ}C$ and $700^{\circ}C$ were linear but those of the specimen betatized at $800^{\circ}C$ and $900^{\circ}C$ were not linear.

• Journal of the Chungcheong Mathematical Society
• /
• v.16 no.1
• /
• pp.73-79
• /
• 2003

A subgroup S(X, ${\gamma}$) of the group of automorphisms of a universal minimal transformation group is introduced and a necessary and sufficient condition for two subgroups to be identical is obtained.

• Journal of the Korean Ceramic Society
• /
• v.32 no.4
• /
• pp.482-488
• /
• 1995

The phase transformation temperature from $\theta$- to $\alpha$-alumina was lowered from 1214$^{\circ}C$ to 114$0^{\circ}C$ in DSC by treating ${\gamma}$-alumina obtained by calcination of boehmite at $700^{\circ}C$ for 2hrswith $\alpha$-Al2O3 seeds (d50=0.36${\mu}{\textrm}{m}$) and 3wt% of the alumina sol. $\alpha$-Al2O3 seeds seemed to lower to the transformation temperature and the alumina sol suppressed the high temperature agglormeration. The effect was increased as the amount of the sol was increased, which was supported by TEM and particle size distribution. For an example, spherical ${\gamma}$-alumina powder with d50=0.54${\mu}{\textrm}{m}$ was prepared by treating the ${\gamma}$-alumina with 9 wt% of the alumina sol and 3wt% of the $\alpha$-Al2O3. It sintered to 99% of the theoretical density at 150$0^{\circ}C$ for 2hrs. and it had relatively homogeneous microstructure with 2~3${\mu}{\textrm}{m}$ sized grains.

• Journal of the Korean Chemical Society
• /
• v.15 no.5
• /
• pp.236-241
• /
• 1971

Various modifications of manganese dioxide have been discussed in terms of the chemical analysis by differential heating curve. The transformation temperatures of the modifications were observed as follows; ${\alpha}-\;and\;{\beta}-MnO_2$ are both $580^{\circ}C∼650^{\circ}C$, ${\gamma}-MnO_2$is is $405^{\circ}C~605^{\circ}C$ and ${\delta}-MnO_2$is $860^{\circ}C~875^{\circ}C$, respectively. Endothermic peaks appeared at the transformation temperatures mentioned above. The restoration temperatures of transformation is completed depending on the amounts of the given samples, but the temperatures of the top of endothermic peaks are nearly constant. The curves of ${\alpha}-,{\beta}-MnO_2$and ${\delta}-MnO_2$ show small peaks while that of ${\gamma}-MnO_2$ shows a sharp and broad peak.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.6
• /
• pp.435-439
• /
• 2000

Explants of lettuce (Lactuca sativa L.) were cocultured with A. tumefaciens LBA 4404 harboring ${\gamma}$-tocopherol methyltransferase (${\gamma}$-TMT) gene from Arabidopsis thaliana. These explants were transferred to MS medium supplemented with 50 mg/L kanamycin, 500 mg/L carbenicillin, 0.1 mg/L NAA and 0.5 mg/L BA. After 4 weeks, kanamycin resistant shoots were obtained from the explants on the selection medium. The putative transgenic shoots were transferred to rooting MS medium supplemented with 50 mg/L kanamycin and 250 mg/L carbenicillin. Stable incorporation of the Arabidopsis ${\gamma}$-TMT cDNA into lettuce genomic DNA was confirmed by PCR and Southern analysis. HPLC analysis showed that $\alpha$- to ${\gamma}$-tocopherol ratio increased over four fold in a transgenic lettuce line indicating successful expression of the transgenic Arabidopsis ${\gamma}$-TMT in lettuce.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.1
• /
• pp.50-57
• /
• 2012

Phospholipase C-${\gamma}l$ (PLC-${\gamma}l$) expression is associated with cellular transformation. Notably, PLC-${\gamma}$ is up-regulated in colorectal cancer tissue and breast carcinoma. Because exotoxins released by Clostridium botulinum have been shown to induce apoptosis and promote growth arrest in various cancer cell lines, we examined here the potential of Clostridium difficile toxin A to selectively induce apoptosis in cells transformed by PLC-${\gamma}l$ overexpression. We found that PLC-${\gamma}l$-transformed cells, but not vector-transformed (control) cells, were highly sensitive to C. difficile toxin A-induced apoptosis and mitotic inhibition. Moreover, expression of the proapoptotic Bcl2 family member, Bim, and activation of caspase-3 were significantly up-regulated by toxin A in PLC-${\gamma}l$-transformed cells. Toxin A-induced cell rounding and paxillin dephosphorylation were also significantly higher in PLC-${\gamma}l$-transformed cells than in control cells. These findings suggest that C. difficile toxin A may have potential as an anticancer agent against colorectal cancers and breast carcinomas in which PLC-${\gamma}l$ is highly up-regulated.

• Journal of Plant Biotechnology
• /
• v.30 no.1
• /
• pp.103-108
• /
• 2003

LinA gene involving in the ${\gamma}$-benzenehexachloride degradation have been cloned from Sphingmonas paucimobilis UT26. This linA gene which catalyzes the first dechlorination step of ${\gamma}$-benzenehexachloride is known to play a key role in the ${\gamma}$-benzenehexachloride degradation pathway in UT26. In this study, the linA gene was designed to clean-up the ${\gamma}$-benzenehexachloride and its derivatives contaminated in soil, water and air using transgenic tobacco plants. The linA transgene was introduced into the chromosome of tobacco using leaf-disk transformation approach as revealed by Southern blot analysis. In addition, mRNA and protein produced by linA gene was expressed at a high level in the leaf tissue as demonstrated by both northern blot analysis and Western bolt analysis with polyclonal antibody against S. paucimobilis UT26. in vitro analysis using GC-MS showed that transgenic tobacco plant produced the linA protein which effectively degraded ${\gamma}$-benzenehexachloride into ${\gamma}$- pentachlorocyclohexene and 1,2,4-trichlobenzene compounds which are less toxic.

• Korean Journal of Materials Research
• /
• v.13 no.3
• /
• pp.137-143
• /
• 2003

The air gap between the metal and mold, formed by shrinkage during solidification, causes surface and subsurface cracks in the continuous casting process. Molten crack on the surface might also occur due to improper heat transfer between them. In order to compensate the air gap in mold design, the thermal contraction is an essential factor. In this study, the thermal contraction and expansion behaviors were examined from the ($\alpha$ and pearlite)/${\gamma}$ to ${\gamma}$/$\delta$ transformations in continuous casting steels by the commercial dilatometer and the self- assembled dilatometer with laser distance measurement. It was found that the thermal contraction and expansion behaviors were very dependant on the phase transformation of the ${\gamma}$/$\delta$ as well as ($\alpha$ and pearlite)/${\gamma}$. The sudden volume change from $\delta$ to ${\gamma}$ which might cause cracks in the continuous casting process, was observed on cooling just below the melting temperature by the self-assembled dilatometer.

• Korean Journal of Metals and Materials
• /
• v.46 no.12
• /
• pp.780-787
• /
• 2008

For the advanced high strength steels (AHSS), high-manganese TWIP (twinning induced plasticity) steels exhibit high tensile strength (800-1000 MPa) and high elongation (50-60%). However, the TWIP steels need to be understood of delayed fracture following the cup drawing test. Among the factors to cause delayed fracture, i.e, martensite transformation, hydrogen embrittlement and residual stress, the effects of martensite transformation (${\gamma}{\rightarrow}{\varepsilon}$ or ${\gamma}{\rightarrow}{\alpha}^{\prime}$) were investigated on the delayed fracture phenomenon. Microstructural phase analysis was conducted for cold rolled (20, 60, 80% reduction ratio) steels and tensile deformed (20, 40, 60% strain) steels. For the Al-added TWIP steels, no martensite phase was found in the cold rolled and tensile deformed specimen. But, the TWIP steels with no Al addition indicated the martensite transformation. The cup drawing specimens showed the martensite transformation irrespective of the Al-addition to the TWIP steel. However, the TWIP steel with no Al exhibited the larger amount of martensite than the case of the TWIP steel with Al addition. For the reason, it was possible to conclude that the Al addition suppressed the martensite transformation in TWIP steels, therefore preventing the delayed fracture effectively. However, it was interesting to note that the mechanism of delayed fracture should be incorporated with hydrogen embrittlement and/or residual stress as well as the martensite transformation.