• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제38권11호
• /
• pp.1245-1256
• /
• 2014

The physical nature of fatigue shows the considerable amount of scatter from intrinsic and extrinsic factors. In this study, some degradation models, such as the gamma process model, were reviewed in terms of uncertainties associated with the continuous, gradual, and monotonic nature of fatigue crack growth. Statistically varying fatigue crack growth data obtained from Lu and Meeker were used as an example to demonstrate the use of the gamma process model. This model can describe the condition and lifetime as statistical distribution curves whose shapes vary with cycles. From the skewness of the statistical distribution curves, it was confirmed that the median is suitable for being considered as the expected life. The use of the gamma process model enables the optimum replacement period and percentile life to be employed as criteria for preventive maintenance policy.

• Journal of Physiology & Pathology in Korean Medicine
• /
• 제20권6호
• /
• pp.1593-1597
• /
• 2006

We hope to evaluate the effects of Gami-Choakwiyeum (GCKY) on the PPAR-${\gamma}$’ in the OVA induced asthma mouse model. Female BALB/c mice, 8 weeks of age and free of murine specific pathogens were used. Mice were sensitized by intraperitoneal injection of OVA emulsified in aluminum hydroxide in a total volume of 200 ${\mu}{\ell}$ on one day and 14 days. On 21, 22, and 23 days after the initial intraperitoneal injection of OVA, the mice were challenged using an ultrasonic nebulizer. GCKY was administered 7 times by oral gavage at 24 hour intervals fromdays 19 after intraperitoneal injection of OVA. Bronchoalveolar lavage was perfromed 72 hours after the last challenge, and total cell numbers in the BAL fluid were counted. Also, the level of PPAR-${\gamma}$ of normal and OVA-induced asthma moused with/without administration of GCKY were measured by Western blot analysis. For the histologic examination, the specimens were stained with hematoxylin 2 and eosin-Y.(H & E). Numbers of total cells were increased significantly at 72 h after OVA inhalation compared with numbers of total cells in the normal and the administration of GCKY. Especially, the increased numbers of eosinophils in BAL fluids after OVA inhalation were significantly increased. However, the numbers of eosinophils reduced by the administration of GCKY. Western blot analysis revealed that PPAR-${\gamma}$ levels in nuclear level were increased slightly after OVA inhalation compared with the levels in the normal group. After the administration of GCKY, PPAR-${\gamma}$ levels in cytosolic and nuclear levels at 72 h after OVA inhalation were markedly increased. On pathologic examination, there were many acute inflammatory cells around the alveoli, bronchioles, and airway lumen of mice with OVA-induced asthma compared with inflammatory cells in the normal group. However, acute inflammatory cells around alveoli, bronchioles, and airway lumen markedly decreased after administration of GCKY, GCKY can increase a PPAR-${\gamma}$ level and could be an effective treatment in asthma patients through the PPAR-${\gamma}$ mechanism for bronchial asthma.

• Journal of the Korean Graphic Arts Communication Society
• /
• 제23권1호
• /
• pp.1-11
• /
• 2005

The propose of this study investigated the reproduction of color image on a CRT monitor, for a range of different values of monitor gamma. We have used the GOG(gain-offset-gamma) model of the behavior of CRT. Color difference have been computed in a color space, based on the CIELAB color appearance model. The 133 patch defined linearly color sample and 24 patch defined printing color target were used, and were subjected to the influence of nine different gamma value. The result shows that netural color is increasing the decrease range of luminance black color than white color. These results concern correct in the context display of color reproduction.

• Journal of the Korean Graphic Arts Communication Society
• /
• 제23권2호
• /
• pp.45-58
• /
• 2005

The propose of this study investigated the reproduction of color image displayed on a CRT monitor, for a range of different values of monitor gamma. We have used the GOG(gain-offset-gamma) model of the behavior of the CRT. Color difference have been computed in a color space, based on the CIELAB color appearance model. The 133 patch defined linearly color sample and 24 patch defined printing color target were used, and were subjected to the influence of nine different gamma value. The result show that neutral color is increasing the decrease range of luminance black color than white color. These results are of concern in the context of the "correct" display of color reproduction.

• Structural Engineering and Mechanics
• /
• 제70권1호
• /
• pp.1-11
• /
• 2019

This study deals with a method based on the modified bivariate gamma function for reconstructions of dynamic behavior of delaminated composite plates subjected to impact loads. The proposed bivariate gamma function is associated with micro-genetic algorithms, which is capable of solving inverse problems to determine the stiffness reduction associated with delamination. From computing the unknown parameters, it is possible for the entire dynamic response data to develop a prediction model of the dynamic response through a regression analysis based on the measurement data. The validity of the proposed method was verified by comparing with results employing a higher-order finite element model. Parametric results revealed that the proposed method can reconstruct dynamic responses and the stiffness reduction of delaminated composite plates can be investigated for different measurements and loading locations.

• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.4093-4097
• /
• 2021

This study presents a new dead-time measurement method using the gamma attenuation law and generalized dead-time models for nuclear gamma-ray detectors. The dead-time of the NaI(Tl) detection system was obtained to validate the new dead-time determination method using very thin lead and polyethylene absorbers. Non-paralyzing dead-time was found to be 8.39 ㎲, and paralyzing dead-time was found to be 8.35 ㎲ using lead absorber for NaI(Tl) scintillator detection system. These dead-time values are consistent with the previously reported dead-time values for scintillator detection systems. The gamma build-up factor's contribution to the dead-time was neglected because a very thin material was used.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제18권5호
• /
• pp.867-876
• /
• 2023

In this study, the attributes of the NHPP software development cost model applying the Gamma family distribution (Erlang, Log-Logistic, Rayleigh) were newly analyzed, and after comparing with the Goel-Okumoto basic model to verify the properties of the model, the optimal model was also presented based on this. To analyze software reliability, failure time data that occurred randomly during system operation was used, and the calculation of the parameters was solved using the maximum likelihood estimation. As a result of comprehensive evaluation through various attribute analysis (mean value function, development cost, optimal release time), it was confirmed that the Rayleigh model had the best performance. Through this study, the attributes of the software development cost model applying the Gamma family distribution, which has no previous research case, were newly identified. Also, basic design data could also be presented so that developers can efficiently utilize this research data at an early stage.

• Journal of the Korea Society of Computer and Information
• /
• 제20권8호
• /
• pp.29-33
• /
• 2015

This paper proposes a discrete logarithm algorithm that remarkably reduces the execution time of Pollard's Rho algorithm. Pollard's Rho algorithm computes congruence or collision of ${\alpha}^a{\beta}^b{\equiv}{\alpha}^A{\beta}^B$ (modp) from the initial value a = b = 0, only to derive ${\gamma}$ from $(a+b{\gamma})=(A+B{\gamma})$, ${\gamma}(B-b)=(a-A)$. The basic Pollard's Rho algorithm computes $x_i=(x_{i-1})^2,{\alpha}x_{i-1},{\beta}x_{i-1}$ given ${\alpha}^a{\beta}^b{\equiv}x$(modp), and the general algorithm computes $x_i=(x_{i-1})^2$, $Mx_{i-1}$, $Nx_{i-1}$ for randomly selected $M={\alpha}^m$, $N={\beta}^n$. This paper proposes 4-model Pollard Rho algorithm that seeks ${\beta}_{\gamma}={\alpha}^{\gamma},{\beta}_{\gamma}={\alpha}^{(p-1)/2+{\gamma}}$, and ${\beta}_{{\gamma}^{-1}}={\alpha}^{(p-1)-{\gamma}}$) from $m=n={\lceil}{\sqrt{n}{\rceil}$, (a,b) = (0,0), (1,1). The proposed algorithm has proven to improve the performance of the (0,0)-basic Pollard's Rho algorithm by 71.70%.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제45권3호
• /
• pp.202-211
• /
• 2017

In this study, numerical simulations were performed using the ${\gamma}-Re_{\theta}$ transition model of KFLOW for the transitional flow over the KARI-11-180 airfoil. Numerical results of KFLOW were compared with experimental data and two other numerical results of XFoil and MSES. Fully turbulence model was predicted high skin friction drag than transition model because fully turbulence model could not solve the transitional flow. Numerical predictions using the ${\gamma}-Re_{\theta}$ model of KFLOW show a good agreement with experimental data and other numerical results. Present numerical results were confirmed the state of drag bucket due to dramatic changing of the transition location on the airfoil surface.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권5호
• /
• pp.572-579
• /
• 2006

Accurate heat release analysis based on the cylinder pressure trace is important for evaluating combustion process of diesel engines. However, traditional single-zone heat release models (SZM) have significant limitations due mainly to their simplified assumptions of uniform charge and homogeneity while neglecting local temperature distribution inside cylinder during combustion process. In this study, a heat release analysis based on single-zone model has been evaluated by comparison with computational simulation result using Fire-code, which is based on multidimensional model (MDM). The limitations of the single-zone assumption have been estimated, To overcome these limitations, an improved model that includes the effects of spatial non-uniformity has been applied. From this improved single-zone heat release model (Improved-SZM), two effective values of specific heat ratios, denoted by ${\gamma}_V$ and ${\gamma}_H$ in this study, have been introduced. These values are formulated as the function of charge temperature changing rate and overall equivalence ratio. Also, it is applied that each equation of ${\gamma}_V$ and ${\gamma}_H$ has respectively different slopes according to several meaningful periods during combustion progress. The heat release analysis results based on improved single-zone model gives a good agreement with FIRE-code results over the whole range of operating conditions of target engine, Hyundai HiMSEN H21/32.