• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11C
• /
• pp.1111-1118
• /
• 2007

This paper presents our study of throughput enhancement achieved by selection diversity in a multiuser system, called multiuser diversity (MUDiv), using a new asymptotic approach. The MUDiv gain is evaluated by deriving an asymptotic formula for the throughput enhancement from the MUDiv gain as a simple closed form introducing a Puiseux series. The formula shows that the MUDiv gain is independent of the signal-to-noise ratio (SNR). This concept can be extended to analysis applicable to scheduling algorithms, such as Max C/I and proportional fair scheduling. The MUDiv gain throughput analysis is verified using Monte-Carlo simulations.

• Publications of The Korean Astronomical Society
• /
• v.18 no.1
• /
• pp.75-79
• /
• 2003

The characteristics of the BOES (Bohyunsan Observatory Echelle Spectrograph) CCD camera is presented. In order to get optimum gain and readout noise of the CCD, we examine the variation of the gain and readout noise by changing the value of output drain voltage of the CCD and measuring the gain using transfer curve, which is defined as the plot of variance versus mean exposure level of a homogeneous light onto the CCD surface. The gain and readout noises are optimised to be 0.5e$^-$/ADU and 3e$^-$, which is good for highest signal-to-noise ratio and contrast for the low light level characteristics of the BOES. We also measure the dark count of the CCD by getting five dark images with 3600 seconds exposure time. The mean dark count from median stacked dark images is essentially zero. A table of positions of defected pixels is also presented.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.2
• /
• pp.127-132
• /
• 1996

Effects on feed intake, liveweight gain and economic benefits of supplementing lambs with urea molasses blocks, were studied. Forty eight crossbred lambs were divided into 6 groups and assigned randomly to grazing on native pasture (CONT) or along with supplements of Commercial ration (COM) and urea molasses blocks (UMBs) containing two levels of cement and calcium oxide as a binding agent. Analysis of variance revealed highly significant (p<0.01) differences in dry matter (DMI, g/day), crude protein (CPI, g/day) and metabolizable energy (MEI, MJ/day) intakes. Differences in liveweight gain (LWG, g/day), feed conversion ratio (FCR) and net economic benefit of supplementation were also highly variable. The intake of DM, CP and ME varied from 974 to 1002, 66-70 and 7.6-8.4 in lambs supplemented with UMBs, significantly (p<0.01) greater than 848, 52.5 and 5.6 in lambs supplemented with COM or FCR and net economic benefits (54.3; 57.8; 17.1 and 1.96; 2.4) in lambs supplemented with COM and UMB-2, were CONT or supplemented with UMB-1, UMB-3 and UMB-4 respectively. Factors responsible for differences in feed intake, liveweight gain and economic benefits, are discussed.

• ETRI Journal
• /
• v.40 no.5
• /
• pp.561-569
• /
• 2018

Modern communication systems employ wideband antennas with circular polarization (CP) radiation. In this work, asymmetric modified bow-tie (ABT) and symmetric modified bow-tie (SBT) slotted circularly polarized single-point probe-fed circular patch antennas with dimensions of $40mm{\times}40mm$ for wideband applications are proposed. A 10 dB RL bandwidth of 350 MHz with CP, 3 dB axial ratio (AR) bandwidth of 100 MHz, peak gain of 4.9 dBic, and 10 dB RL bandwidth of 530 MHz with CP, 3 dB AR bandwidth of 140 MHz, peak gain of 5 dBic are obtained for ABT and SBT slotted circular patch antennas, respectively. The proposed SBT slotted patch is scaled up and down to $50mm{\times}50mm$ and $30mm{\times}30mm$, respectively. The proposed scaled-up version offers 10 dB RL and 3 dB AR bandwidths of 340 MHz and 80 MHz, with a peak gain of 5 dBic. The scaled-down version offers 10 dB RL and 3 dB AR bandwidths of 710 MHz and 180 MHz, with a peak gain of 5.25 dBic. These prototypes are suitable to work in IEEE 802.11a WLAN, ISM, and IEEE 802.11ac applications. The measured and simulated results are then discussed and compared.

• ETRI Journal
• /
• v.33 no.6
• /
• pp.897-903
• /
• 2011

A hybrid ${\Delta}{\Sigma}$ modulator for audio applications is presented in this paper. The pulse generator for digital-to-analog converter alleviates the requirement of the external clock jitter and calibrates the coefficient variation due to a process shift and temperature changes. The input resistor network in the first integrator offers a gain control function in a dB-linear fashion. Also, careful chopper stabilization implementation using return-to-zero scheme in the first continuous-time integrator minimizes both the influence of flicker noise and inflow noise due to chopping. The chip is implemented in a 0.13 ${\mu}m$ CMOS technology (I/O devices) and occupies an active area of 0.37 $mm^2$. The ${\Delta}{\Sigma}$ modulator achieves a dynamic range (A-weighted) of 97.8 dB and a peak signal-to-noise-plus-distortion ratio of 90.0 dB over an audio bandwidth of 20 kHz with a 4.4 mW power consumption from 3.3 V. Also, the gain of the modulator is controlled from -9.5 dB to 8.5 dB, and the performance of the modulator is maintained up to 5 nsRMS external clock jitter.

• Journal of Power Electronics
• /
• v.18 no.1
• /
• pp.11-22
• /
• 2018

This paper presents a single switch, high step-up, non-isolated dc-dc converter suitable for renewable energy applications. The proposed converter is composed of a coupled inductor, a passive clamp circuit, a switched capacitor and voltage lift circuits. The passive clamp recovers the leakage inductance energy of the coupled inductor and limits the voltage spike on the switch. The configuration of the passive clamp and switched capacitor circuit increases the voltage gain. A wide continuous conduction mode (CCM) operation range, a low turn ratio for the coupled inductor, low voltage stress on the switch, switch turn on under almost zero current switching (ZCS), low voltage stress on the diodes, leakage inductance energy recovery, high efficiency and a high voltage gain without a large duty cycle are the benefits of this converter. The steady state operation of the converter in the continuous conduction mode (CCM) and discontinuous conduction mode (DCM) is discussed and analyzed. A 200W prototype converter with a 28V input and a 380V output voltage is implemented and tested to verify the theoretical analysis.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.4
• /
• pp.868-876
• /
• 2014

This study was conducted to estimate the optimum dietary protein to energy (P/E) ratio in juvenile river puffer. Nine experimental diets were formulated with three energy levels and three protein levels at each energy levels. Three energy levels of 3000, 3750 and 4500 kcal diets were included at 45, 50 and 55% crude protein (CP) levels, respectively (45P3000, 45P3750, 45P4500, 50P3000, 50P3750, 50P4500, 55P3000, 55P3750 and 55P4500). Fish averaging $3.43{\pm}0.02$ g randomly were fed the experimental diets in triplicate groups for 8 weeks. Weight gain of fish fed the 50P4500 diet were significantly higher than that of fish fed the 45P3000, 45P3750, 45P4500, 50P3000 and 50P3750 diets (P<0.05), but there was not significantly different from that of fish fed the 50P4500, 55P3750 and 55P4500 diets. Feed efficiency of fish fed the 50P4500 diet were significantly higher than that of fish fed the 45P3000, 45P3750, 45P4500, 50P3000 and 50P3750 diets (P<0.05), but there was not significantly different from that of fish fed the 50P4500, 55P3000, 55P3750 and 55P4500 diets. Protein efficiency ratio of fish fed the 45P3000 and 45P3750 diets was higher than that of fish fed 50P4500 and 55P4500, but there was not significantly different from that of fish fed the 45P3000, 45P3750, 45P4500, 50P3000, 50P3750, 55P3000 and 55P3750 diets. Based on weight gain, feed efficiency and specific growth rate, diets containing energy levels 4500 kcal/kg diet had an optimum P/E ratio of approximately 111 mg protein/kcal (50% crude protein) in juvenile river puffer.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.4
• /
• pp.251-260
• /
• 2017

This paper describes the design of a slit on ground plane to improve the axial ratio of the spiral antenna for the NLJD system application. A proposed slit shape located on the ground plane is changed to compare with the archimedean spiral slit shape of the antenna in reference [7]. In order to improve the axial ratio, the slit on the ground plane is divided by the uniform angle and the conductor of position where the current has the opposite direction each other is eliminated. Measured return loss, radiation pattern and gain show a good agreement with the computer simulation results. Even though the proposed slit structure on the ground plane was changed to compare with ones of reference [7], the characteristics such as return loss, radiation pattern and gain are not almost changed and only the axial ratio was remarkably improved at 4.88 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.1
• /
• pp.26-36
• /
• 2000

A circularly polarized $12\times12$ array with application in the satellite communications is designed at 10 GHz. The radiator is an aperture-coupled ring patch, which is suitable of large arrays. The element spacing of the array is chosen to be $0.7\lambda_0$to maintain the main beam in the broadside direction. The array is a sequential array constructed on a series-parallel feed network to obtain high gain and low axial ratio. Measurement results for the array, acquired by experiments in the compact range of POSTECH, showed a directivity of 27.88 dB, a high gain of 25.55 dB, an efficiency of 60%, an axial ratio of 1.74 dB, and a side-lobe level of -13 dB. The bandwidth of the array was 43% when the VSWR was 2, and the bandwidth of the axial ratio was 16%.

• Journal of Animal Science and Technology
• /
• v.44 no.3
• /
• pp.341-350
• /
• 2002

Twenty four Hanwoo bulls(mean initial body weight 162$\pm$8.1kg) were employed to induce the regression equations on body weight gain and dry matter intake. The diets were fed in a 3${\times}$4 factorial arrangement; three roughage sources(rice straw, hay, corn silage) and four roughage ratios in ration(100, 60, 40, 20%). Bulls were alloted by incomplete turn over design with four replications. Daily body weight gain was greatest in bulls fed the corn silage as a roughage source and the 20% of roughage ratio, respectively. Bulls fed hay or corn silage only as feed kept in their body weight gain during the whole experimental period, however those fed rice straw only were in a negative body gain hereafter fatteningⅠperiod(350kg of body wt.). Dry matter intake per metabolizable body weight was decreased with increasing body weight. Dry matter intake was greatest in bulls fed the corn silage as a roughage source and the 20% of roughage ratio, respectively. The regression equations on daily body weight gain(DG, kg) and dry matter intake(DMI, kg/day) according to body weight(BW, kg) of Hanwoo bulls were derived as follows; DG = －0.842 + 17.5DMI/$BWkg^{0.75}$ DMI = 4.125 + 0.013BW + 1.075DG － 0.045NDF where, NDF is the percentage of neutral detergent fiber in ration.