• The Journal of the Acoustical Society of Korea
• /
• v.23 no.4E
• /
• pp.125-133
• /
• 2004

In this paper, we propose a critical banded wavelet packet-based spectral subtraction for speech enhancement. Critical banded wavelet packet, which reflects the human auditory system, may lead to minimization of intelligibility loss and quality improvement of the enhanced speech in the spectral domain, when combined with an appropriate spectral subtraction gain function. The proposed method shows better performance than the conventional one in comparative assessments. We also show that, for effective evaluation of enhanced speech, it is essential to consider the characteristics of speech quality measures.

• ETRI Journal
• /
• v.37 no.1
• /
• pp.26-31
• /
• 2015

Axial-ratio (AR) bandwidth enhancement is achieved for a circularly polarized (CP) cylindrical dielectric resonator antenna (DRA) using a wideband hybrid coupler (WHC) combined with dual probe feed. The presented WHC, comprised of a Wilkinson power divider and a wideband $90^{\circ}$ shifter, delivers good characteristics in terms of 3 dB power splitting and consistent $90^{\circ}$ (${\pm}5^{\circ}$) phase shifting over a wide bandwidth. In turn, the proposed CP DRA, for the employment of the WHC, in place of conventional designs, provides a significant enhancement on AR bandwidth and impedance matching. The antenna prototype with the WHC exhibits a 3 dB AR bandwidth of 48.66%, an impedance bandwidth of 52.5% for voltage standing wave ratio (VSWR) ${\leq}2$, and a bandwidth of 44.66% for a gain of no less than 3 dBi. Experiments demonstrate that the proposed WHC is suitable for broadband CP DRA design.

• MALSORI
• /
• no.57
• /
• pp.153-164
• /
• 2006

The MMSE-STSA based speech enhancement algorithm is widely used as a preprocessing for noise robust speech recognition. It weighs the gain of each spectral bin of the noisy speech using the estimate of noise and signal power spectrum. In this paper, we investigate the influence of parameters used to estimate the speech signal and noise power in MMSE-STSA upon the recognition performance of noisy speech. For experiments, we use the Aurora2 DB which contains noisy speech with subway, babble, car, and exhibition noises. The HTK-based continuous HMM system is constructed for recognition experiments. Experimental results are presented and discussed with our findings.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.85-88
• /
• 2011

This paper describes a single channel speech enhancement as the pre-processor of automatic speech recognition system. The improvements are based on using optimally modified log-spectra (OM-LSA) gain function with a non-causal a priori signal-to-noise ratio (SNR) estimation. Experimental results show that the proposed method gives better perceptual evaluation of speech quality score (PESQ) and lower log-spectral distance, and also better word accuracy. In the enhancement system, parameters was turned for automatic speech recognition.

• Korean Journal of Optics and Photonics
• /
• v.6 no.2
• /
• pp.135-141
• /
• 1995

Phenomenological nonlinear gain saturation effect on the noise characteristics of a multi-electrode DBR laser, when the lasing wavelength changes continuously, is presented theoretically. Using the optical transmission line theory, noise characteristics reliant on output power are analyzed by taking into account both the spontaneous enhancement factor K due to the distribution of the spontaneous emission along the active cavity and the nonlinear gain saturation effect. Spontaneous emission rate was increased due to an increase in injected current into the passive section, which in turn lead to increase in relative intensity noise (RIN) and frequency noise. Phenomenological nonlinear gain saturation was found to have significant effect on RIN and frequency noise characteristics. However. Iinewidth was found to decrease due to a phenomenological nonlinear gain saturation effect. ffect.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.822-828
• /
• 2001

In this paper, a high gain microstrip antenna with rectangular cavity backed is designed. A single microstrip patch is basically a low gain radiator As a ga in enhancement method, superstrate loading techniques are applied to the $2\times2$ microstrip array antenna with cavity backed. In antenna design, although the broadside gain increases as the cavity is enlarged, a cavity size of $3\times3$ wavelength is sufficient. The distance between the radiating elements is chosen as 1.5 free-space wavelength. The antenna radiation characteristics are calculated by IE3D software and compared with the experimental results. Experimental results show that the maximum gain is 18.6dBi at the frequency of 9.16GHz, which is good agreement with the calculations.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.100-106
• /
• 2011

Radio Frequency (RF) signal fluctuates dynamically in wireless communication environments, where this fluctuation is severe especially in vehicular environments. Automatic Gain Control (AGC) is critical in wireless communications to establish reliable communication links and compensate the received signal fluctuation. In this paper, we introduce a simple and novel AGC scheme which uses both Received Signal Strength Indicator (RSSI) and analog-to digital converter (ADC) signals. Performance enhancement of the proposed AGC scheme is verified with practical measurements including simulations.

• ETRI Journal
• /
• v.29 no.5
• /
• pp.673-675
• /
• 2007

We present the design and fabrication of a 60 GHz medium power amplifier monolithic microwave integrated circuit with excellent gain-flatness for a 60 GHz radio-over-fiber system. The circuit has a 4-stage structure using microstrip coupled lines instead of metal-insulator-metal capacitors for unconditional stability of the amplifier and yield enhancement. The gains of each stage of the amplifier are modified to provide broadband characteristics of input/output matching for the first and fourth stages and to achieve higher gains for the second and third stages to improve the gain-flatness of the amplifier for wideband.

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.62-64
• /
• 2004

초고속 RF IC의 핵심소자인 SiGe에피텍시층을 가진 이종양극트란지스터 (hetero junction bipolar transistor: HBT)를 0.35um급 CMOS공정으로 제작하였다. 이때 IOW $V_{BE}$영역에서의 Current Gain의 선형성을 향상시키기 위하여 Capping 실리콘의 두께를 200과 300${\AA}$으로 나누고 EDR (Emitter Drive-in RTA)의 온도와 시간을 900$\~$1000C, 0$\~$30sec로 각각 변화시키면서 최적조건을 알아보았다. 실험범위 내에서의 최적공정조건은 300${\AA}$의 capping 실리콘과 975C-30sec의 EDR조건이었다.

• Journal of Broadcast Engineering
• /
• v.15 no.1
• /
• pp.122-132
• /
• 2010

AT-DMB system has been developed to increase data rate up to double of conventional T-DMB in the same bandwidth while maintaining backward compatibility. The AT-DMB system adopted hierarchical modulation which adds BPSK or QPSK signal as enhancement layer to existing DQPSK signal. The enhancement layer signal should be small enough to maintain backward compatibility and to minimize the coverage loss of conventional T-DMB service coverage. But this causes the enhancement layer signal of AT-DMB susceptible to fading effect in transmission channel. A turbo code which has improved error correction capability than convolutional code, is applied to the enhancement layer signal of the AT-DMB system for compensating channel distortion. However there is a need for other solutions for better reception of AT-DMB signal in receiver side without increasing transmitting power. In this paper, we propose adaptive array antenna system with Eigen-space beamforming algorithm which benefits beamforming gain along with diversity gain. We analyzed the reception performances of AT-DMB system in indoor and mobile environments when this new smart antenna system and algorithm is introduced. The computer simulation results are presented along with analysis comments.