• 제목/요약/키워드: gSOAP

검색결과 32건 처리시간 0.026초

보건계 대학생의 손씻기에 대한 지식, 태도 및 수행도 (Knowledge, Attitude, and Performance on the Hand Washing of Health Care related Students)

  • 유성미
    • 한국산학기술학회논문지
    • /
    • 제14권8호
    • /
    • pp.3916-3924
    • /
    • 2013
  • 본 연구는 보건계 대학생의 손씻기 관련 특성과 손씻기 지식과 태도 및 수행도를 파악하여 올바른 손씻기를 수행하기 위한 방안을 제공하고자 실시하였다. 대상은 G광역시 일개대학의 보건계 대학생 425명을 대상으로 설문지를 이용하여 자료수집을 하였고 SPSS/WIN 18.0을 이용하여 기술통계, t-test, one way ANOVA, Pearson correlation coefficient로 분석하였다. 1일 평균 손씻기 횟수는 8.7회, 시간(초)는 평균 18.5초였다. 손씻기 교육 수는 평균 2.4회였다. 손씻기에 가장 많이 사용하는 세제는 일반 세수비누, 손 건조도구는 종이타올이었다. 손씻기 관련 특성에서 손씻기 횟수와 시간은 손씻기 교육수가 6회 이상, 실습을 통한 교육 실시, 소독비누로 손씻기, 종이타올로 손 닦기 등에서 모두 유의한 차이로 높았다. 손씻기 지식, 태도, 수행도 점수는 여자(성별), 상급종합병원, 1일 11회 이상의 손씻기 횟수, 1회 손씻는 시간 16초 이상, 6회 이상의 교육 수, 실습을 통한 교육에서 가장 점수가 높았다. 손씻기 지식, 태도, 수행도간의 상관관계는 모두 유의했다. 이 연구 결과는 효과적인 손씻기를 위해 손씻기 지식, 태도 및 수행도를 높이기 위한 손씻기 교육프로그램을 계속적으로 개발할 필요성을 나타내고 있다.

Microwave Assisted Energy Efficient Biodiesel Production from Crude Pongamia pinnata (L.) Oil Using Homogeneous Catalyst

  • Kumar, Ritesh;Sethy, A.K.
    • Journal of Forest and Environmental Science
    • /
    • 제31권1호
    • /
    • pp.1-6
    • /
    • 2015
  • Microwave assisted biodiesel production from crude Pongamia pinnata oil using homogeneous base catalyst (KOH) was unsuccessful because of considerable soap formation. Therefore, a two step process of biodiesel production from high free fatty acid (FFA) oil was investigated. In first step, crude P. pinnata oil was acid catalyzed using $H_2SO_4$ and acid value of oil was reduced to less than 4 mg KOH/g. Effect of sulfuric acid concentration, alcohol-oil molar ratio and microwave irradiation time on acid value of oil was studied. Result suggested that 1.5% $H_2SO_4$ (w/w), 6:1 methanol oil molar ratio and 3 min microwave irradiation time was sufficient to reduce the acid value of oil from 12 and 22 mg KOH/g to 2.9 and 3.9 mg/KOH/g, respectively. Oil obtained after pretreatment was subsequently used for microwave assisted alkali catalyzed transesterification. A higher biodiesel yield (99.0%) was achieved by adopting two step processes. Microwave energy efficiency during alkali catalyzed transesterification was also investigated. The results suggested a significant energy saving because of reduced reaction time under microwave heating.

네트워크 카메라에서 ONVIF 표준을 이용한 장치 관리 서비스 설계 및 구현 (Design and Implementation of Device Management Service Using ONVIF Standard in Network Camera)

  • 백진욱;김선필;김남기
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2012년도 한국컴퓨터종합학술대회논문집 Vol.39 No.1(A)
    • /
    • pp.209-211
    • /
    • 2012
  • ONVIF(Open Network Video Interface Forum)는 네트워크 카메라의 제어 및 관리에 대한 표준으로 이 표준은 각각 회사마다 다른 네트워크 카메라의 프로토콜을 표준화 함으로써 호환성 문제를 해결한다. 그리고 ONVIF는 표준에 따라서 만들어진 장치들에 대해서 인증을 수행할 수도 있다. 따라서 본 논문에서는 ONVIF 표준을 구현하기 위해 필요한 요소들을 알아보고 gSOAP 라이브러리를 통하여 장치 관리 서비스를 설계하고 구현해 본다. 그리고 장치 관리 서비스에서 중요도가 높고 꼭 필요한 요소를 구현하여 테스트 툴로 검증함으로써 ONVIF에서 인증이 가능함을 보인다.

Poly(Styrene/Acrylate) Core-Shell 라텍스 입자의 제조와 물성에 관한 연구 (Preparation and Physical Properties of Poly(Styrene/Acrylate) Core-Shell Latex Particles)

  • 이경구;박근호
    • 한국응용과학기술학회지
    • /
    • 제20권1호
    • /
    • pp.27-32
    • /
    • 2003
  • The core-shell latex particles were prepared by sequential emulsion polymerization of alkyl methacrylate and styrene(ST) by using an water-soluble initiator(APS) after preparing monomer pre-emulsion in the presence of an anionic surfactant(SDBS). In organic/organic core-shell polymerization, the pre-emulsion method, which minimized required quantity of sulfactant, has been used to increase the conversion rate and the stability of core-shell latex particles as well as to reduce the formation of secondary particle that cause problems of soap-free emulsion during shell polymerization. We used several methods to observe the core-shell structure. The core-shell structure was studied by measuring pH change during hydrolysis by NaOH, glass transition temperature($T_g$) by differential scanning calorimeter(DSC), morphology of latex by transmission electron microscope(TEM) and change of particle size and distribution by a particle analyzer.

전력 설비 감시 시스템들 간의 정보 교환 기법에 관한 연구 (A Study on the Information Exchange Technique among Electric Power Facilities and Monitoring Systems)

  • 홍창호;박찬엄;이승철;문운철
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2006년도 춘계학술대회 논문집
    • /
    • pp.453-456
    • /
    • 2006
  • In this paper, we introduce the design and implementation of Information exchange technique among power system facilities and/or their monitoring systems based on Universal Description, Discovery and Integration Service and Simple Object Access Protocol. The rapid progresses in high speed network, 4G web language S/W and embedded H/W enabled faster and easier communications among electric power systems monitoring facilities. However, each facility or system has its own specific protocol like RS-232 and RS-486, which somewhat limits the capability of flexible information exchange among thor In this paper, we try to demonstrate the potential of utilizing the SOAP and UDDI services in exchanging the metadata and possibly high abstraction level informations among electric power facilities and/or their monitoring systems.

  • PDF

횡방향 전단하중을 받는 단일방향 복합재료의 미시역학적 거동연구 (Micromechanical behavior of unidirectional composites under a transverse shear loading)

  • 최흥섭
    • 대한기계학회논문집A
    • /
    • 제21권11호
    • /
    • pp.1896-1911
    • /
    • 1997
  • Effects of fiber-matrix interphases on the micro-and macro-mechanical behaviors of unidirectionally fiber-reinforced composites subjected to transverse shear loading at remote distance have been studied. The interphases between fibers and matrix have been modeled by the spring-layer which accounts for continuity of tractions, but allows radial and circumferential displacement jumps across the interphase that are linearly related to the normal and tangential tractions. Numerical calculations for basic cells of the composites have been carried out using the boundary element method. For an undamaged composite the micro-level stresses at the matrix side of the interphase and effective shear stiffness have been computed as functions of fiber volume ratio $V_f$ and interphase stiffness k. Results are presented for various interphase stiffnesses from the perfect bonding to the case of total debonding. For a square array composite the results show that for a high interphase stiffness k>10, an increase of $V_f$ increases the effective transverse shear modulus G over bar of the composite. For a relatively low interphase stiffness k<1, it is shwon that an increase of $V_f$ slightly decreases the effective transverse shear modulus. For the perfect bonding case, G over bar for a hexagonal array composite is slightly larger than that for a square array composite. Also for a damaged composite partially debonded at the interphase, local stress fields and effective shear modulus are calculated and a decrease in G over bar has been observed.

Methacrylate 견직물가공과 방추도개선에 대한 연구 (Studies on Methacrylate Finish with Silk Fabrics and their Anticrease)

  • 최병희;이양후
    • 한국잠사곤충학회지
    • /
    • 제28권2호
    • /
    • pp.65-73
    • /
    • 1986
  • 본 연구는 Methacrylate monomer를 실크직유 속에서 중합시킴으로서 실크의 방추도를 향상시킬 목적으로 진행되었으며 이 목적을 달성하기 위하여 다음 몇가지 시료직물을 원포와 가공포로 분류하고 세탁을 반복함에 따른 방추도, 강연도 및 세탁수축도를 조사하였다. (1)Polyester, Geogette, 직물밀도…90cm-85g/m (2)Silk, Twill, 정사견, 박지, 직물밀도…90cm-90g/m (3)Silk, Twill, 정사견, 후지, 직물밀도…90cm-200g/m (4)Silk, Satin, 정사견, 박지, 직물밀도…90cm-90g/m 얻어진 결과를 종합하면 다음과 같다. (1)가공처리한 견직물들의 방추도는 원포의 것보다 약 10%의 증가를 보였다. (2)박지견직물의 방추도가 만족할 만치 개선되었으나 후지견직물은 다소 미흡한 결과이였다. (3)강연도는 가공견직물들의 촉감이 손상되지 않는 범위에서 가공된 사실을 확인하기 위하여 한 것인바 문제점이 없었다. (4)세탁후의 수축도는 모든 견직물이 polyester 보다 크게 나왔는데 그 이유는 견직물의 공장정리공정에 tenter처리로 물리적 증폭된 것을 원포로 썼기 때문으로 본다. (5)각 직물의 방추도, 강연도 및 방추도가 세탁반복에 따라 다소간 나쁜 방향으로 변하고 있는 결과를 보았는데 이것은 직유의 취화처리에도 원인이 있다고 본다. (6)결론적으로 견직물을 수지가공했다고 세탁해서 착용할 것이 아니라 역시 dry deaning을 하여 가공효과를 유지하는 것이 상책으로 본다.

  • PDF

클라우드컴퓨팅에서 메시지패싱방식 응용프로그램의 효율적인 체크포인트 알고리즘 (Efficient Checkpoint Algorithm for Message-Passing Parallel Applications on Cloud Computing)

  • Le, Duc Tai;Dao, Manh Thuong Quan;Ahn, Min-Joon;Choo, Hyun-Seung
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2011년도 춘계학술발표대회
    • /
    • pp.156-157
    • /
    • 2011
  • In this work, we study the checkpoint/restart problem for message-passing parallel applications running on cloud computing environment. This is a new direction which arises from the trend of enabling the applications to run on the cloud computing environment. The main objective is to propose an efficient checkpoint algorithm for message-passing parallel applications considering communications with external systems. We further implement the novel algorithm by modifying gSOAP and OpenMPI (the open source libraries) which support service calls and checkpoint message-passing parallel programs, especially. The simulation showed that additional costs to the executing and checkpointing application of the algorithm are negligible. Ultimately, the algorithm supports efficiently the checkpoint/restart service for message-passing parallel applications, that send requests to external services.

식물성 유지 및 폐식용유를 사용한 고강도 콘크리트의 자기수축 및 공학적 특성 (Autogenous Shrinkage and Engineering Properties of the High Strength Concrete Using Soybean and Waste Edible Oil)

  • 한민철;이동규
    • 한국건설순환자원학회논문집
    • /
    • 제6권3호
    • /
    • pp.110-117
    • /
    • 2011
  • 본 연구에서는 콩기름과 자원 재활용 차원의 폐식용유의 새로운 자기수축 저감방안으로서의 가능성을 검토하고자 수축저감제 및 팽창재와 비교 분석하였는데, 그 결과는 다음과 같다. SO 및 WO는 Plain에 비해 유동성이 소폭 저하되었으나 공기량에서는 큰 차이를 보이지 않았고, 강도결과는 재령 28일에 유지류에서 약간의 저하가 발생하였지만 대부분의 수준에서 양호한 결과를 나타냈다. 자기수축 저감효과는 SO와 WO가 RS 및 EA보다 우수함을 확인할 수 있었는데, 이는 SO과 WO의 지방산이 시멘트 수화물 중 $Ca(OH)_2$와 가수분해 반응을 진행하여 지방산 칼슘염을 생성하게 되는데, 이러한 생성물들이 콘크리트 경화체내의 모세관 공극을 충전시켜 수축완화 작용에 기인한 것으로 사료된다. 공극분포 측정결과 SO 및 WO의 경우 치환율에 상관없이 $0.01{\sim}0.1{\mu}m$ 사이즈의 공극이 0 ml/g으로 나타났으며, $10{\sim}100{\mu}m$ 사이즈의 공극이 매우 적은 것으로 나타나 유지류가 콘크리트의 미세공극을 충전해주는 역할을 하는 것으로 판단된다.

  • PDF

본초 광물로서의 활용을 위한 산지별 전기석의 광물학적 연구 (Mineralogical Studies of the Tourmaline for Medicinal Applications by Production Localities)

  • ;김선옥;박희율;박맹언
    • 자원환경지질
    • /
    • 제51권4호
    • /
    • pp.345-358
    • /
    • 2018
  • 이 연구는 전기석이 본초 광물의 활용 가능성을 평가하기 위하여 중국 산동성 흑색 전기석 5종, 브라질 미나스 제라이스(Minas Geraris)광산의 흑색 및 핑크색 전기석 2종, 한국 대유광산 흑색 전기석 1종을 대상으로 전자탐침미세분석, X-선 회절분석, 유도결합플라스마 분광방출분석, 퓨리에변환 적외선분광분석, 원적외선 분석, 핵자기공명분석 및 물-전기석 반응에 따른 pH-DO 변화를 수행하였다. 또한, 전기석 찜질방의 온열효과와 전기석 분말을 첨가한 비누가 피부에 미치는 영향을 검토하였다. 연구에 사용된 전기석 시료들은 철과 알루미늄 및 붕소 함량이 높은 유형으로 분류되며, 칼슘, 나트륨, 칼륨, 철과 붕소 함량변화는 전기석의 고용체 특성을 반영한다. $CaO/(CaO+Na_2O)$와 MgO/(FeO+MgO) 함량비는 높은 정(+)의 상관관계를 갖는다. 전기석 분말과 증류수와의 반응에서 DO값은 반응시간의 경과에 따라 낮아지며, DO=10에서 안정된다. pH는 6시간까지 증가되고, 24시간 이후에는 대체적으로 pH=8에서 안정된 상태를 유지한다. 전기석은 단파장에서 흡수 스펙트럼의 강도와 투과율이 낮아지며, 흡수 스펙트럼의 파장과 강도는 구성 원소의 함량과 결정학적 특징에 따라 달라진다. 특히, 철의 함량증가는 방사량을 감소시키는 원인이 되는 것으로 확인되었다. 전기석의 철 함량과 원적외선 방사량의 상관관계는 높은 정(+)의 상관성을 가지며, 알루미늄과 마그네슘 함량은 부(-)의 상관관계를 나타낸다. 증류수와 전기석 분말의 반응은 $^{17}O-NMR$ 반치폭을 감소시키는 것으로 확인되었다. 전기석에 의한 고온 찜질방(약 $100^{\circ}C$ 사우나)에서의 온열효과는 체온을 $0.5-1.5^{\circ}C$ 정도 높이며, 맥박은 평균 12회, 혈압은 10mg Hg 상승한다. 전기석 비누는 피부에 매우 좋은 효과를 나타내며, 알레르기와 아토피 등의 문제성 피부에서 보통이상의 개선 효과를 갖는 것으로 확인되었다.