• 전기학회논문지P
• /
• 제65권2호
• /
• pp.108-113
• /
• 2016

The real-world problems usually show nonlinear and multi-variate characteristics, so it is difficult to establish concrete mathematical models for them. Thus, it is common to practice data-driven modeling techniques in these cases. Among them, most widely adopted techniques are regression model and intelligent model such as neural networks. Regression model has drawback showing lower performance when much non-linearity exists between input and output data. Intelligent model has been shown its superiority to the linear model due to ability capable of effectively estimate desired output in cases of both linear and nonlinear problem. This paper proposes modeling method of daily photovoltaic power systems using ELM(Extreme Learning Machine) based modular networks. The proposed method uses sub-model by fuzzy clustering rather than using a single model. Each sub-model is implemented by ELM. To show the effectiveness of the proposed method, we performed various experiments by dataset acquired during 2014 in real-plant.

• 전기학회논문지
• /
• 제66권4호
• /
• pp.692-700
• /
• 2017

In this paper, we propose the structural design of Interval Type-2 FCM based RBFNN. Proposed model consists of three modules such as condition, conclusion and inference parts. In the condition part, Interval Type-2 FCM clustering which is extended from FCM clustering is used. In the conclusion part, the parameter coefficients of the consequence part are estimated through LSE(Least Square Estimation) and WLSE(Weighted Least Square Estimation). In the inference part, final model outputs are acquired by fuzzy inference method from linear combination of both polynomial and activation level obtained through Interval Type-2 FCM and acquired activation level through Interval Type-2 FCM. Additionally, The several parameters for the proposed model are identified by using differential evolution. Final model outputs obtained through benchmark data are shown and also compared with other already studied models' performance. The proposed algorithm is performed by using Iris and Vehicle data for pattern classification. For the validation of regression problem modeling performance, modeling experiments are carried out by using MPG and Boston Housing data.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제4권2호
• /
• pp.129-134
• /
• 2004

XML is the new universal format for structured documents and data on the World Wide Web. As the Web becomes a major means of disseminating and sharing information and as the amount of XML data increases substantially, there are increased needs to manage and design such XML document in a novel yet efficient way. Moreover a demand of XML Schema(W3C XML Schema Spec.) that verifies XML document becomes increasing recently. However, XML Schema has a weak point for design because of its complication despite of various data and abundant expressiveness. Thus, it is difficult to design a complex document reflecting the usability, global and local facility and ability of expansion. This paper shows a simple way of modeling for XML document using a fundamental means for database design, the Entity-Relationship model. The design from the Entity-Relationship model to XML Schema can not be directly on account of discordance between the two models. So we present some algorithms to generate XML Schema from the Entity-Relationship model. The algorithms produce XML Schema codes using a hierarchical view representation. An important objective of this modeling is to preserve XML Schema's object-oriented concepts such as reusability, global and local ability. In addition to, implementation procedure and evaluation of the proposed design method are described.

• Environmental Engineering Research
• /
• 제14권2호
• /
• pp.111-119
• /
• 2009

A prototype GIS-based decision support system (DSS) was developed by using a database management system (DBMS), a model management system (MMS), a knowledge-based system (KBS), a graphical user interface (GUI), and a geographical information system (GIS). The method of selecting a dispersion model or a modeling scheme, originally devised by Park and Seok, was developed using our GIS-based DSS. The performances of candidate models or modeling schemes were evaluated by using a single index(statistical score) derived by applying fuzzy inference to statistical measures between the measured and predicted concentrations. The fumigation dispersion model performed better than the models such as industrial source complex short term model(ISCST) and atmospheric dispersion model system(ADMS) for the prediction of the ground level $SO_2$ (1 hr) concentration in a coastal area. However, its coincidence level between actual and calculated values was poor. The neural network models were found to improve the accuracy of predicted ground level $SO_2$ concentration significantly, compared to the fumigation models. The GIS-based DSS may serve as a useful tool for selecting the best prediction model, even for complex terrains.

• 해양환경안전학회지
• /
• 제17권1호
• /
• pp.53-60
• /
• 2011

본 연구에서는 의사결정자의 대립관계가 있는 항만개발 문제에 대한 우선순위 평가와 보상관계를 분석하였다. 이를 위해 먼저 항만개발에 대한 관련문헌을 분석하여 평가요소를 추출하였고, FSM법을 이용하여 평가요소를 구조화하고, 구조화 분석을 통해 평가항목을 선정하였다. 두 번째, 항만개발 평가 주체를 지역주민, 이용자, 지자체로 선정하고 AHP법을 이용하여 종합 평가치를 산출하였다. 세 번째 JMPR법을 이용하여 평가주체간 제휴를 구성하였을때 종합 평가결과와 대체안 선정에 따른 불만량을 최소로 하여 평가하는 방법을 제시하였다. 또한 대체안 선정에 따른 보상문제를 정량화하고 보상관계를 분석하였다. 그 결과 대상 항만중 부산항 개발이 가장 우선되어야 하며, 항만이용자는 환경에 대한 인식의 개선과, 지자체에서는 환경 친화적인 항만개발을 위한 환경 인센티브 정책을 추진해야 할 것이다.

• 한국지능시스템학회논문지
• /
• 제15권2호
• /
• pp.245-250
• /
• 2005

인터넷의 급격한 발전으로 교육환경$\cdot$방법에 대한 새로운 패러다임 창출요구가 증가하고 있으며 전통적인 교육산업도 교육의 전 분야에서 이론 활용한 e-teaming이 많은 분야에서 도입되었고, 빠른 속도로 그 영역이 확장되고 있다. 이러한 e-learning 확산 노력에 힘입어 그동안 e-learning의 학습자 만족도에 대한 연구도 많이 진행되어 왔지만 기업체를 대상으로 한 연구가 거의 대부분이었고 고등학교를 대상으로 한 연구는 거의 없는 실정이다. 따라서, 본 연구에서는 이러한 배경을 바탕으로 고등학생을 대상으로 한 e-learning 교육만족도 평가를 위한 모델을 제안하고, 제안한 모델을 대상으로 퍼지구조 모델링법을 이용하여 고등학생의 e-learning 교육 만족도에 관한 의식구조를 분석하였다. 또한, 의식구조분석의 결과가 고려된 평가모델을 구축하여 e-learning 교육 만족도를 평가하고, 민감도분석을 통하여 e-learning 교육만족도 향상 방안을 제시 하였다.

• 한국항해항만학회지
• /
• 제27권5호
• /
• pp.569-576
• /
• 2003

우리나라가 속해 있는 동북아지역은 동남아시아와 더불어 세계 물류의 중심지 및 생산공장의 역할을 수행하고 있다. 특히 동북아시아를 선도하고 있는 한국, 중국, 일본의 경우 동아시아의 물류 거점역활 선점과 글로벌기업 유치를 위하여 다양한 Free Zone제도를 제정 도입하여 활성화에 노력을 기울이고 있다. 이러한 상황에서 동 제도의 시행초기 단계에 있는 우리나라의 경우, 주변국을 벤치마킹하여 성공요인을 찾는 것이 시행착오를 줄이고 경쟁의 우위를 확보하는 지름길이 될 것이다. 한편, 주변국의 Free Zone들은 다양한 전략을 가지고 경쟁을 하고 있으나, 우리나라의 경우 자유무역지대 활성화 전략에 포함되는 구성요소간의 종속관계, 계층파악 등의 시스템 적인 차원에서의 접근은 전무한 실정이다. 따라서 본 논문은 이러한 점에 착안하여, 군산 자유무역지대(Free Trade Zone) 성공요인을 파악하고, 이를 바탕으로 하여 군산자유무역지대 활성화를 위한 구조모델을 FSM법을 사용하여 구축하는 것을 연구의 목적으로 하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권11호
• /
• pp.5568-5587
• /
• 2018

This research uses artificial intelligence methods for computer network intrusion detection system modeling. Primary classification is done using self-organized maps (SOM) in two levels, while the secondary classification of ambiguous data is done using Sugeno type Fuzzy Inference System (FIS). FIS is created by using Adaptive Neuro-Fuzzy Inference System (ANFIS). The main challenge for this system was to successfully detect attacks that are either unknown or that are represented by very small percentage of samples in training dataset. Improved algorithm for SOMs in second layer and for the FIS creation is developed for this purpose. Number of clusters in the second SOM layer is optimized by using our improved algorithm to minimize amount of ambiguous data forwarded to FIS. FIS is created using ANFIS that was built on ambiguous training dataset clustered by another SOM (which size is determined dynamically). Proposed hybrid model is created and tested using NSL KDD dataset. For our research, NSL KDD is especially interesting in terms of class distribution (overlapping). Objectives of this research were: to successfully detect intrusions represented in data with small percentage of the total traffic during early detection stages, to successfully deal with overlapping data (separate ambiguous data), to maximize detection rate (DR) and minimize false alarm rate (FAR). Proposed hybrid model with test data achieved acceptable DR value 0.8883 and FAR value 0.2415. The objectives were successfully achieved as it is presented (compared with the similar researches on NSL KDD dataset). Proposed model can be used not only in further research related to this domain, but also in other research areas.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.739-744
• /
• 2002

Recently we have discovered that sediments should be separated from lithosphere, and soil should be separated from biosphere, both sediment and soil will be mixed sediments-soil-sphere (Seso-sphere), which is using particulate mechanics to be solved. Erosion and sediment both are moving by particulate matter with water or wind. But ancient sediments will be erosion same to soil. Nowadays, real soil has already reduced much more. Many places have only remained sediments that have ploughed artificial farming layer. Thus it means sediments-soil-sphere. This paper discusses sediments-soil-sphere erosion modeling. In fact sediments-soil-sphere erosion is including water erosion, wind erosion, melt-water erosion, gravitational water erosion, and mixed erosion. We have established geographical remote sensing information modeling (RSIM) for different erosion that was using remote sensing digital images with geographical ground truth water stations and meteorological observatories data by remote sensing digital images processing and geographical information system (GIS). All of those RSIM will be a geographical multidimensional gray non-linear equation using mathematics equation (non-dimension analysis) and mathematics statistics. The mixed erosion equation is more complex that is a geographical polynomial gray non-linear equation that must use time-space fuzzy condition equations to be solved. RSIM is digital image modeling that has separated physical factors and geographical parameters. There are a lot of geographical analogous criterions that are non-dimensional factor groups. The geographical RSIM could be automatic to change them analogous criterions to be fixed difference scale maps. For example, if smaller scale maps (1:1000 000) that then will be one or two analogous criterions and if larger scale map (1:10 000) that then will be four or five analogous criterions. And the geographical parameters that are including coefficient and indexes will change too with images. The geographical RSIM has higher precision more than mathematics modeling even mathematical equation or mathematical statistics modeling.

• 한국지능시스템학회:학술대회논문집
• /
• 한국지능시스템학회 2007년도 추계학술대회 학술발표 논문집
• /
• pp.415-418
• /
• 2007

가까운 미래에 인간생활에 활용될 지능형 로봇은 인간과 공존하면서도 효과적으로 인간을 도와줄 수 있는 인간친화형 로봇이라 할 수 있다. 이러한 것을 실현하기 위해서 로봇은 미지의 환경 내에서 자신의 위치 및 방향을 인식해야 할 필요가 있다. 더욱이, 이것은 일상생활에서 자연스럽게 이뤄지는 것이 당연하다. 로봇을 제어하는 가장 중요한 문제중의 하나로서 이동로봇의 주행에서의 위치불확실성을 해결함으로서 로봇의 위치를 추정하는 것이 바람직하다 할 수 있다. 본 논문에서는 실내외 공간에서 인간을 포한함 이동물체의 영상정보를 이용하여 이동로봇의 자기위치를 인식하기 위한 방법을 제시하고 있다. 제시한 방법은 로봇자체의 DR센서 정보와 카메라에서 얻은 영상정보로부터 로봇의 위치추정방법을 결합 한 것이다. 그리고 이동물체의 이전 위치정보와 관측 카메라의 모델을 사용하여 이동물체에 대한 영상프레임 좌표와 추정된 로봇위치 간의 관계를 표현할 수 있는 식을 제시하고 있다. 또한 이동하는 인간과 로봇의 위치와 방향을 추정하기 위한 제어방법을 제시하고 이동로봇의 위치를 추정하기위해서 칼만필터 방법을 적용하였다. 그리고 시뮬레이션 및 실험을 통하여 제시한 방법을 검증하였다.