• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6289-6295
• /
• 2014

Rework systems are the equipment used to install or remove semiconductor chips with BGA or SMD forms in printed circuit boards. The rework systems have hot air outlets. At the outlets, precise temperature control is needed to avoid heat shock. The aim of this paper was to suggest a new controller for temperature control at the hot air outlets. The suggested controller was a fuzzy PID controller. The fuzzy PID controllers were composed of TSK fuzzy rules and had outstanding ability for nonlinear systems control. This paper reports the design algorithm of fuzzy PID controllers, and the design process of the fuzzy PID controller for the temperature control of the outlets. Temperature control experiments were performed to verify the ability of the suggested controller. As a result, the RMS of the proposed method is 9.44 and the general method is 15.88. The experiments showed that the temperatures at the outlet using the suggested fuzzy PID controller followed the desired ones better than the commonly used PID controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.646-651
• /
• 2004

This paper deals with a new adaptive fuzzy sliding mode controller and its application to an inverted pendulum. We propose new method of adaptive fuzzy sliding mode control scheme that the fuzzy logic system is used to approximate the unknown system functions in designing the SMC of uncertain nonlinear systems. The controller's construction and its analysis involve sliding modes. The proposed controller consists of two components. Sliding mode component is employed to eliminate the effects of disturbances, while a fuzzy model component equipped with an adaptation mechanism reduces modeling uncertainties by approximating model uncertainties. To demonstrate its performance, the proposed control algorithm is applied to an inverted pendulum. The results show that both alleviation of chattering and performance are achieved

• International Journal of Control, Automation, and Systems
• /
• v.4 no.2
• /
• pp.178-186
• /
• 2006

We propose and analyze a robust adaptive fuzzy controller for nonlinear systems without a priori knowledge of the sign of the input gain function. No assumptions are made about the type of nonlinearities of the system, except that such nonlinearities are smooth. The uncertain nonlinearities are captured by the fuzzy systems that have been proven to be universal approximators. The proposed control scheme completely overcomes the singularity problem that occurs in the indirect adaptive feedback linearizing control. Projection in the estimated parameters and switching in the control input are both not required. The stability of the closed-loop system is guaranteed in the Lyapunov viewpoint.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.6
• /
• pp.560-564
• /
• 2015

This paper presents a design method of a static output feedback controller for continuous T-S fuzzy systems via parallel distributed compensation (PDC). The existence condition of a set of static output feedback gains is represented in terms of linear matrix inequalities (LMIs). The sufficient condition presented here does not need any transformation matrices and equality constraints and is less conservative than the previous results seen in [20].

• International Journal of Control, Automation, and Systems
• /
• v.5 no.6
• /
• pp.712-717
• /
• 2007

This paper is concerned with the problem of state feedback control of continuous-time nonlinear Markovian jump systems, which are represented by Takagi-Sugeno fuzzy models. A new method for designing state feedback stabilizing controllers is presented in terms of solvability of a set of linear matrix inequalities (LMIs), and it is shown that the new design method provides better or at least the same results of the existing method in the literature. Finally, a numerical example is given to illustrate the effectiveness of the proposed method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.3
• /
• pp.272-279
• /
• 1997

In this paper, a fuzzy generalized predictive control (FGPC) for non-linear plants is proposed. In the proposed method, the receding horizon control is applied to the control part, while fuzzy systems are used for the predictor part. It is suggested that the fuzzy predictor is time-varying affine with respect to input variables for easy computation of control inputs. Since the receding horizon control can be obtained only with a predictor instead of a plant model, the fuzzy predictor is obtained directly from input-output data without identifying a plant model. A parameter estimation algorithm is used for identifying the fuzzy predictor. The control inputs of the FGPC are computed by minimizing a receding horizon cost function with predicted plant outputs. The proposed controller has a similar architecture to the generalized predictive control (GPC) except for the predictor synthesis method, and thus may possess inherent good properties of the GPC. Computer simulations show that the performance of the FGPC is satisfactory.

• Transactions on Control, Automation and Systems Engineering
• /
• v.4 no.1
• /
• pp.49-55
• /
• 2002

A decrease in the birthrate and aging are progressing in Japan and several countries. In that society, it is important that physically weak persons such as elderly persons are able to take care of themselves. We have been developing exoskeletal robots for human (especially for physically weak persons) motion support. In this study, the controller controls the angular position and impedance of the exoskeltal robot system using multiple fuzzy-neuro controllers based on biological signals that reflect the human subject's intention. Skin surface electromyogram (EMG) signals and the generated wrist force by the human subject during the elbow motion have been used as input information of the controller. Since the activation level of working muscles tends to vary in accordance with the flexion angle of elbow, multiple fuzzy-neuro controllers are applied in the proposed method. The multiple fuzzy-neuro controllers are moderately switched in accordance with the elbow flexion angle. Because of the adaptation ability of the fuzzy-neuro controllers, the exoskeletal robot is flexible enough to deal with biological signal such as EMG. The experimental results show the effectiveness of the proposed controller.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.941-944
• /
• 1993

In this paper, we present an international benchmark used in the adaptive control specialist community in order to evaluated the fuzzy control performances. Before solving the corresponding problems, we introduce some improvements on a classic fuzzy controller in order to consider high order systems and time delays. At the end of this paper, the simulation results obtained with the extended Fuzzy Controller will be compared with those obtained with a Supervised Adaptive Controller.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.1 no.1
• /
• pp.44-49
• /
• 2001

For minimum phase systems, the conventional fuzzy logic controllers (FLCs) use the error and the change-of-error as fuzzy input variables. Then the control rule table is a skew symmetric type, that is, it has UNLP (Upper Negative and Lower Positive) or UPLN property. This property allowed to design a single-input FLC (SFLC) that has many advantages. But its control parameters are not automatically adjusted to the situation of the controlled plant. That is, the adaptability is still deficient. We here design a single-input direct adaptive FLC (SDAFLC). In the AFLC, some parameters of the membership functions characterizing the linguistic terms of the fuzzy rules are adjusted by an adaptive law. The SDAFLC is designed by a stable error dynamics. We prove that its closed-loop system is globally stable in the sense that all signals involved are bounded and its tracking error converges to zero asymptotically. We perform computer simulations using a nonlinear plant and compare the control performance between the SFLC and the SDAFLC.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.1
• /
• pp.130-135
• /
• 2007

In this paper, a direct model reference adaptive fuzzy control (MRAFC) scheme is developed for the plant model whose structure is represented by the MIMO Takagi-Sugeno fuzzy model. The MRAFC scheme is proposed to provide asymptotic tracking of a reference signal lot the systems with uncertain or slowly time-varying parameters. The developed control law and adaptive law guarantee that all signals in the closed-loop system are bounded. In addition, the plant state tracks the state of the reference model asymptotically with time tot any bounded reference input signal.