• 농업생명과학연구
• /
• 제43권2호
• /
• pp.1-8
• /
• 2009

우리나라 석회암지대는 한반도에서 그다지 넓지 않은 좁은 지역에 집중적으로 분포하고 있고, 독특한 생태계 지역이므로 석회암지대 산림관리를 위한 기초자료를 제공하고자 산림식생의 유형분류, 산림토양의 이화학적 특성, 환경요인과 식생유형의 상관관계 등을 구명한 결과, 식생은 굴참나무군락군과 신갈나무군락군의 2개 군락군으로 크게 분류되었고, 기타 하위식생단는 4개 군락, 6개 군, 2개 소군으로 세분되어 총 8개의 식생단위로 나타났다. 석회암지대 조사지의 토성은 미사질양토로 나타났고, A층의 토양산도는 7.55로 나타났으며, 치환성 양이온인 칼슘($Ca^{2+}$)과 마그네슘($Mg^{2+}$) 함량은 각각 평균 $26.04cmol_{c}/kg$와 $2.93cmol_{c}/kg$으로서 매우 높게 나타났다. 굴참나무군락군은 pH가 높고, 사면경사가 급하고, 노암율이 높으며, Ca 이온의 농도가 높은 입지에 주로 분포하는 경향이었고, 신갈나무군락군은 표고가 높은 입지에 분포하는 경향이었다.

• 한국방재안전학회논문집
• /
• 제13권4호
• /
• pp.75-92
• /
• 2020

일반적으로 물수지 분석 시 공급에 해당되는 회귀수량의 경우 용수별 회귀율을 일률적으로 정하여 산정하는 방법을 채택하고 있어 정확한 가용유량을 산정하지 못하는 한계를 갖고 있다. 이에 본 연구에서는 회귀수 중 하·폐수에 초점을 두었고 인공신경망 등의 기계학습 모형을 적용하여 하수종말처리장의 방류량 예측 모형을 개발하였다. 시계열 자료예측 시 사용되는 주요 기계학습 모형인 LSTM (Long Short-Term Memory), GRU (Gated Recurrent Units), SVR (Support Vector Regression)모형을 적용하였으며 관측 값과 예측 값을 비교하는 오차지표를 통하여 방류량 예측의 최적의 모형을 선정하였다. 모형 적용 결과, GRU 모형의 평균제곱근 오차(Root Mean Square Error, RMSE)는 LSTM 모형과 SVR 모형보다 작으며 Nash-Sutcliffe 계수(NSE)는 LSTM 모형과 SVR 모형보다 큰 것을 확인하였고, 이를 근거로 하수종말처리장의 방류량 예측에 최적모형은 GRU 모형이라고 판단하였다. 다만, 극값에서는 예측 값이 과소 및 과대 산정되는 경향을 보여 추후 예측 정확도 향상을 위해서는 극한사상에 대한 추가자료 구축 및 입력 자료의 최소시간단위를 축소하는 것이 필요할 것으로 판단되었다. 또한, 예측하고자 하는 대상지의 용수이용량을 검토하고 계절적 영향을 반영할 수 있는 추가인자를 고려하게 되면 기후변동성에 대비하여 정확한 방류량 예측이 가능하며 예측 결과를 토대로 종합적인 하천수 사용관리 및 물이용 계획 수립을 위한 기초자료로 활용될 수 있을 것으로 기대된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1066-1070
• /
• 2003

Recently technologies have created new principle and theory but the PID control system remains its popularity as the PID controller contains simple structure, including maintenance and parameter adjustment being so simple. Thus, this paper proposes auto tune PID by fuzzy logic controller based on FPGA which to achieve real time and small size circuit board. The digital PID controller design to consist of analog to digital converter which use chip TDA8763AM/3 (10 bit high-speed low power ADC), digital to analog converter which use two chip DAC08 (8 bit digital to analog converters) and fuzzy logic tune digital PID processor embedded on chip FPGA XC2S50-5tq-144. The digital PID processor was designed by fundamental PID equation which architectures including multiplier, adder, subtracter and some other logic gate. The fuzzy logic tune digital PID was designed by look up table (LUT) method which data storage into ROM refer from trial and error process. The digital PID processor verified behavior by the application program ModelSimXE. The result of simulation when input is units step and vary controller gain ($K_p$, $K_i$ and $K_d$) are similarity with theory of PID and maximum execution time is 150 ns/action at frequency are 30 MHz. The fuzzy logic tune digital PID controller based on FPGA was verified by control model of level control system which can control level into model are correctly and rapidly. Finally, this design use small size circuit board and very faster than computer and microcontroller.

• 한국환경복원기술학회지
• /
• 제18권6호
• /
• pp.179-190
• /
• 2015

This study was carried out to suggest fundamental concepts and data ideas for biodiversity and confrontation strategy on global environmental changes by analyzing geomorphic milieu and geotop in Mt. Jeombong experimental forest. Elements of landform were classified as landform sets by scale. Scale for classification could be decide on four categories. We could classify landforms which scale zero is seven elements, scale one is twelve elements, scale two is fifteen elements, scale three is twenty nine elements. Especially mountain wetlands were classed as valley and channel types in Mt. Jeombong. Geotop by clustering methods could be four spatial units as 2, 3, 5, and 7 classes, and analyzed geodiversity as landform sets for explanation of vegetation distribution. Rate of rise of temperature was $0.031^{\circ}C$ per year, change ratio was increased $1.25^{\circ}C$, and also precipitation was increased 320mm during forty year(from year 1973 to year 2012). The result of this research can be affordable to provide information for forest management of mountainous areas.

• 한국항공우주학회지
• /
• 제34권11호
• /
• pp.84-91
• /
• 2006

최근에 인공위성용 전자소자는 우주방사선에 좀 더 강한 소자를 요구되어진다. 왜냐하면, 인공위성의 수명과 기능은 우주방사선으로부터 영향을 받기 때문이다. 또한, 과거에는 부품단위의 우주방사선 시험을 수행하지 않고 유닛 또는 서브시스템 단위의 우주방사선 시험을 수행하였다. 게다가, 발사된 인공위성이 작동오류 상태에 있을 때 그 이유를 분석하기에는 그다지 쉬운 일은 아니다. 따라서, 발사 전 부품 단위 우주방사선 시험을 수행하여 주요 소자에 대한 우주방사선에 의한 영향을 분석 할 필요가 있으며, 지상에서 데이터를 확보할 필요가 있다. 그러므로, 본 논문에서는 모든 전자소자의 기본이라 할 수 있는 금속-산화막 반도체 전계효과 트랜지스터의 총이온화선량에 대한 영향 시험을 수행하기 위한 테스트 베드를 제안한다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제22권1호
• /
• pp.5-11
• /
• 1999

This paper reviews recent major activities on instrumentation and methodology of PET. The performance of the PET instrumentation can be expressed by four physical characteristics, 1) spatial resolution, 2) coincidence resolving time, 3) energy resolution, and 4) detection efficiency. The physical and technical aspects of PET systems are briefly discussed along with these characteristics. Toward high resolution PET the recent trend has been to design multiple rings of densely packed detector arrays with scintillators. In order to satisfy the sampling requirement in reconstruction, continuous detector units has been developed. Iterative image reconstruction algorithms have received considerable attention for improvement of both the sampling requirement and image quality toward the stationary PET. Better resolving time improves the maximum true coincidence rate, which is also increased with more detectors placed in coincidence with each other. It suggests that volume PET is promising for enhancement of detection efficiency. The scattered coincidence event rate may be reduced by using detectors with better energy resolution. The use of interplane septa, however, takes over improvement of energy resolution in 2D PET. Energy resolution becomes an important factor for image quality under the condition of septa removal such as volume PET. Toward full utilization of emitting photons, 3D reconstruction incorporating oblique rays has been studied, and volume reconstruction algorithms have been developed. Practical volume PET systems impose heavy burden not only to detector sets and coincidence circuits, but also to computers in the memory requirements and the data processing. In conclusion, there have been many ingenious methods in development of PET instrumentation, which are based on unique capability of PET. They will be expected to overcome technical limitations, and to approach the fundamental limits.

• 대한수학회보
• /
• 제22권2호
• /
• pp.121-126
• /
• 1985

D.K. Harrison [5] has shown that if R and S are fields of characteristic different from 2, then two Witt rings W(R) and W(S) are isomorphic if and only if W(R)/I(R)$^{3}$ and W(S)/I(S)$^{3}$ are isomorphic where I(R) and I(S) denote the fundamental ideals of W(R) and W(S) respectively. In [1], J.K. Arason and A. Pfister proved a corresponding result when the characteristics of R and S are 2, and, in [9], K.I. Mandelberg proved the result when R and S are commutative semi-local rings having 2 a unit. In this paper, we prove the result when R and S are 2-fold full rings. Throughout this paper, unless otherwise specified, we assume that R is a commutative ring having 2 a unit. A quadratic space (V, B, .phi.) over R is a finitely generated projective R-module V with a symmetric bilinear mapping B: V*V.rarw.R which is nondegenerate (i.e., the natural mapping V.rarw.Ho $m_{R}$ (V, R) induced by B is an isomorphism), and with a quadratic mapping .phi.:V.rarw.R such that B(x,y)=(.phi.(x+y)-.phi.(x)-.phi.(y))/2 and .phi.(rx)= $r^{2}$.phi.(x) for all x, y in V and r in R. We denote the group of multiplicative units of R by U(R). If (V, B, .phi.) is a free rank n quadratic space over R with an orthogonal basis { $x_{1}$, .., $x_{n}$}, we will write < $a_{1}$,.., $a_{n}$> for (V, B, .phi.) where the $a_{i}$=.phi.( $x_{i}$) are in U(R), and denote the space by the table [ $a_{ij}$ ] where $a_{ij}$ =B( $x_{i}$, $x_{j}$). In the case n=2 and B( $x_{1}$, $x_{2}$)=1/2, we reserve the notation [ $a_{11}$, $a_{22}$] for the space.the space.e.e.e.

• 복식
• /
• 제64권7호
• /
• pp.97-113
• /
• 2014

The study aims to determine the significance and characteristics of self-similarity inherent in natural objects or phenomena, the existence of self-similarity in design created by fashion designers, and the traits and internal significance implied in self-similarity and their effects on fashion. The subject of the study is Viktor & Rolf, and the scope of the study is the collections created from 2001 to 2014, which include designs implemented in their early years and those unveiled in the media. Self-similarity means attributes of a fractal structure appearing without change in the original form, even after modification of scale or direction in terms of shape or phenomena. As self-similarity is applied to the arts and design sectors, it leads people to pay attention to fundamental characteristics and intrinsic forms as a factor of expressing a unique creative world. Analysis of Viktor & Rolf collections generated ribbons, overlapping/juxtaposition, side decorations and exaggerated design elements as basic units of self-similarity. These factors had self-similarity rates as high as 84%. Self-similarity was established as design elements formed in the incipient stage were repeated in a certain form, and continued for a long period of time. It served as an element that recognizes design and a fashion designer at the same time. Characteristics of self-similarity appearing in Viktor & Rolf collections can be summarized as homeostasis based on an equivalent relationship, balance based on self-organization, reducibility into essential elements, and uniqueness based on odd shapes. These characteristics influenced the pursuit of consistent brand image, the maintenance of a fashion designer's creative world, the formation of styles and the expression of a fashion designer's identity.

• 한국산업보건학회지
• /
• 제30권1호
• /
• pp.28-38
• /
• 2020

Objectives: The purpose of this study is to identify the perceived problems of and suggest improvement measures for asbestos abatement companies in support of asbestos-related systems and policies. Methods: For this study a questionnaire was prepared consisting of current work (two questions), the contribution and necessity of a risk assessment system for asbestos abatement (two questions), and problems with and improvement measures for systems and policies (nine questions). The questionnaires were sent to 2,170 asbestos abatement companies and were returned by 83 companies (return rate = 3.8%). We conducted frequency analysis, ANOVA, and a Chi-squared test at the 5% significance level. Results: Asbestos abatement companies expressed difficulties with complying with wet work (43% of unenrolled managers), negative pressure enclosure (36% of all respondents), and installation and use of decontamination units (26% of all respondents) as stipulated in the relevant regulations. In addition, 43% of the respondents expressed concerns that the expertise of the company was not considered during bidding for asbestos abatement and hoped that an advantage (e.g., bid point) would be given to the upper grades for asbestos risk assessment (38%). Asbestos abatement companies generally rented and used negative pressure devices (including negative pressure recording devices) and suggested that periodic calibration (32%) is needed to ensure the performance of the rented equipment. Finally, the respondents asked for clear definitions for three situations specified in the Occupational Safety and Health Acts: (1) temporarily leaving the asbestos abatement workplace; (2) tasks with less airborne asbestos; and (3) physically breaking or cutting using a machine. Conclusions: The problems and improvement measures identified in this study of asbestos abatement companies can be utilized as fundamental information for the improvement of the systems and policies for safe asbestos abatement.

• 생물환경조절학회지
• /
• 제9권4호
• /
• pp.212-222
• /
• 2000

본 연구는 온실 난방시스템의 연소 체임버에 부착된 연소가스 배출연통에 열회수기를 장착하여 배출가스로부터 열을 회수하는 열회수장치의 성능에 대해 실험·분석하였다. 열회수시스템은 LPG 연소 체임버와 두 개의 열회수기로 구성되어있다. 열회수기-A는 배기가스 연통에 직접 연결되어 있으며 열회수기-B는 열회수기-A에 직렬로 연결되어 있다. 회수되는 열량은 가스의 질량흐름율과 두 측점간의 엔탈피 차이로서 산정하였으며 5가지의 송풍전압별로 각 열회수기의 성능을 검토하였다. 각 열회수기의 공기튜브 다발에 공급된 공기와 튜브 다발에 가로질로 통과하는 연소가스간의 열교환, 열회수기 유·출입부간의 압력감소, 열회수기의 총열회수성능 등으로 온실의 연통을 통해 낭비되는 열을 회수하여 연료 절감 효과를 얻을 수 있는 최적의 열회수장치 설계용 기초자료 확보에 본 연구의 목적이 있다.