• Title/Summary/Keyword: fundamental ring

Search Result 120, Processing Time 0.02 seconds

Cloning and Expression Analysis of a Novel Mouse Zinc Finger Protein Gene Znf313 Abundantly Expressed in Testis

  • Li, Na;Sun, Huaqin;Wu, Qiaqing;Tao, Dachang;Zhang, Sizhong;Ma, Yongxin
    • BMB Reports
    • /
    • v.40 no.2
    • /
    • pp.270-276
    • /
    • 2007
  • We have cloned a novel mouse zinc finger protein gene Znf313 by rapid amplification of cDNA ends (RACE) according to the homologue of human ZNF313 gene. The cDNA is 2,163 base pairs (bp) in length and encodes a 229 amino acids (aa) protein with a $C_3HC_4$ ring finger domain and three $C_2H_2$ domains. 89% and 93% nucleotide (nt) and aa sequence identity is observed with its human homologue. Revealed by Northern blot and RT-PCR, full mRNA consists of 2.16 kb and widely expresses in tissues as a single transcript, most abundantly in heart, liver, kidney and testis. The expression of Znf313 in testis is detected in all development stages. Western blot analysis also reveals that Znf313 is expressed in the tissues. Immunohistochemical staining and subcellular localization demonstrate that Znf313 is expressed both in the cytoplasm and nucleus whereas predominantly localized in the nucleus. Present data suggests that Znf313 gene might play a fundamental role in gene transcription and regulation in organism and relates to spermatogenesis.

A NOTE ON WITT RINGS OF 2-FOLD FULL RINGS

  • Cho, In-Ho;Kim, Jae-Gyeom
    • Bulletin of the Korean Mathematical Society
    • /
    • v.22 no.2
    • /
    • pp.121-126
    • /
    • 1985
  • D.K. Harrison [5] has shown that if R and S are fields of characteristic different from 2, then two Witt rings W(R) and W(S) are isomorphic if and only if W(R)/I(R)$^{3}$ and W(S)/I(S)$^{3}$ are isomorphic where I(R) and I(S) denote the fundamental ideals of W(R) and W(S) respectively. In [1], J.K. Arason and A. Pfister proved a corresponding result when the characteristics of R and S are 2, and, in [9], K.I. Mandelberg proved the result when R and S are commutative semi-local rings having 2 a unit. In this paper, we prove the result when R and S are 2-fold full rings. Throughout this paper, unless otherwise specified, we assume that R is a commutative ring having 2 a unit. A quadratic space (V, B, .phi.) over R is a finitely generated projective R-module V with a symmetric bilinear mapping B: V*V.rarw.R which is nondegenerate (i.e., the natural mapping V.rarw.Ho $m_{R}$ (V, R) induced by B is an isomorphism), and with a quadratic mapping .phi.:V.rarw.R such that B(x,y)=(.phi.(x+y)-.phi.(x)-.phi.(y))/2 and .phi.(rx)= $r^{2}$.phi.(x) for all x, y in V and r in R. We denote the group of multiplicative units of R by U(R). If (V, B, .phi.) is a free rank n quadratic space over R with an orthogonal basis { $x_{1}$, .., $x_{n}$}, we will write < $a_{1}$,.., $a_{n}$> for (V, B, .phi.) where the $a_{i}$=.phi.( $x_{i}$) are in U(R), and denote the space by the table [ $a_{ij}$ ] where $a_{ij}$ =B( $x_{i}$, $x_{j}$). In the case n=2 and B( $x_{1}$, $x_{2}$)=1/2, we reserve the notation [ $a_{11}$, $a_{22}$] for the space.the space.e.e.e.

  • PDF

Optimum topology design of geometrically nonlinear suspended domes using ECBO

  • Kaveh, A.;Rezaei, M.
    • Structural Engineering and Mechanics
    • /
    • v.56 no.4
    • /
    • pp.667-694
    • /
    • 2015
  • The suspended dome system is a new structural form that has become popular in the construction of long-span roof structures. Suspended dome is a kind of new pre-stressed space grid structure that has complex mechanical characteristics. In this paper, an optimum topology design algorithm is performed using the enhanced colliding bodies optimization (ECBO) method. The length of the strut, the cable initial strain, the cross-sectional area of the cables and the cross-sectional size of steel elements are adopted as design variables and the minimum volume of each dome is taken as the objective function. The topology optimization on lamella dome is performed by considering the type of the joint connections to determine the optimum number of rings, the optimum number of joints in each ring, the optimum height of crown and tubular sections of these domes. A simple procedure is provided to determine the configuration of the dome. This procedure includes calculating the joint coordinates and steel elements and cables constructions. The design constraints are implemented according to the provision of LRFD-AISC (Load and Resistance Factor Design-American Institute of Steel Constitution). This paper explores the efficiency of lamella dome with pin-joint and rigid-joint connections and compares them to investigate the performance of these domes under wind (according to the ASCE 7-05), dead and snow loading conditions. Then, a suspended dome with pin-joint single-layer reticulated shell and a suspended dome with rigid-joint single-layer reticulated shell are discussed. Optimization is performed via ECBO algorithm to demonstrate the effectiveness and robustness of the ECBO in creating optimal design for suspended domes.

Wood Properties of Quercus acuta due to Thinning Intensity (붉가시나무의 간벌 강도에 따른 재질 특성)

  • Hong, Nam-Euy;Won, Kyung-Rok;Jung, Su-Young;Lee, Kwang-Soo;Byeon, Hee-Seop
    • Journal of the Korean Wood Science and Technology
    • /
    • v.43 no.6
    • /
    • pp.721-729
    • /
    • 2015
  • Wood properties depend on not only environmental factors such as soil, climate change, or forest stand characteristics, but also silviculture practices such as thinning, regeneration, or selection. This study report influences of the extent of thinning intensity from no thinning, moderate and heavy thinning to the wood property of Quercus acuta forest stands in Wan-do arboretum, Jeollanam-do Province. The results showed that there were close relationships between thinning intensity and anatomical, physical or mechanical properties of Quercus acuta wood. Especially, there are close relationships between thinning intensity and ring width or mechanical properties of wood. As a result, this study showed high correlations between Quercus acuta wood properties and thinning intensity of Quercus acuta forest stand. These findings are expected to be very useful as fundamental data for the implementation of silviculture practices of this specie to produce timber.

TIMBER AGE ESTIMATION OF COMMERCIAL TIMBERLAND IN TENNESSEE, USA USING REMOTELY SENSED DATA

  • Lee, Jung-Bin;Kim, Sung-Hoon;Jayakumar, S.;Heo, Joon
    • Proceedings of the KSRS Conference
    • /
    • 2007.10a
    • /
    • pp.449-451
    • /
    • 2007
  • In the commercially managed timber lands, the information such as height, age, stand density, canopy closure and leaf area index need to be collected periodically. Stand volume is the most fundamental information in the valuation of timber, however, stand age information is the primary element of forest inventory and these two are highly correlated. Conventional method of collecting stand age information by field surveys such as ring count method is accurate; however, it is expensive, labor-intensive and time consuming. In the present study it was aimed to collect stand age information using modem techniques in a commercially managed timberland situated in Tennessee, USA. The Landsat Thematic Mapper (TM), Enhanced Thematic Mapper (ETM+) of three different periods, Shuttle Radar Topography Mission (SRTM), National elevation dataset (NED) and field inventory data were used. Normalized difference vegetation index (NDVI) and Tasselled Cap (TC) transformation techniques were applied on the TM and ETM+ data. The regression analysis was carried out to identify the correlation between stand age and NDVI, TC. In the present study about 2,469 datasets were analyzed. The $R^{2}$ value for stand age estimation was 0.713. The NDVI, TC2 and TC3 were found to produce accurate timber age information.

  • PDF

Characteristics and Combined Sewer Overflows (합류식 하수관거의 유출 특성 분석 조사)

  • An, Ki-Sun;Jang, Sung-Ryong;Kwon, Young-Ho
    • Journal of Environmental Science International
    • /
    • v.19 no.6
    • /
    • pp.747-753
    • /
    • 2010
  • It follows in quality and sewage exclusion method of the investigation objective sector and the Combined Sewer Overflows which is suitable in regional characteristics and the confluence area against the rainfall initially a flow and the medulla and measurement - it analyzes the initial rainfall outflow possibility control plan which is suitable in the domestic actual condition and it proposes the monitor ring plan for the long-term flow and pollution load data accumulation. From the research which it sees the Infiltration water/Influent water and CSOs investigation it passes by the phase of hazard chain and Namwon right time 4 it does not hold reverse under selecting, Measurement it used the hazard automatic flow joint seal Sigma 910 machine and in case 15 minute interval of the I/I, it measured a flow at case 5, 15 minute standing of the CSOs. The water quality investigation for the water leakage investigation of the I/I and the sewage from the point which is identical with flow measurement during on-the-spot inspection duration against 6 items which include the BOD sampling and an analysis, when the rainfall analysis for CSOs fundamental investigation analyzed against 18 items which include the BOD sampling. Consequently, for the optimum interpretation invasion water / inflow water of the this investigation area day average the lowest flow - water quality assessment veterinarian optimum interpretation hazard average per day - lowest flow - it averages a medulla evaluation law department one lowest flow evaluation technique and it selects, it presentation collectively from here it gets, position result with base flow analysis of invasion water / inflow water.

Analysis of the Tsyganenko Magnetic Field Model Accuracy during Geomagnetic Storm Times Using the GOES Data

  • Song, Seok-Min;Min, Kyungguk
    • Journal of Astronomy and Space Sciences
    • /
    • v.39 no.4
    • /
    • pp.159-167
    • /
    • 2022
  • Because of the small number of spacecraft available in the Earth's magnetosphere at any given time, it is not possible to obtain direct measurements of the fundamental quantities, such as the magnetic field and plasma density, with a spatial coverage necessary for studying, global magnetospheric phenomena. In such cases, empirical as well as physics-based models are proven to be extremely valuable. This requires not only having high fidelity and high accuracy models, but also knowing the weakness and strength of such models. In this study, we assess the accuracy of the widely used Tsyganenko magnetic field models, T96, T01, and T04, by comparing the calculated magnetic field with the ones measured in-situ by the GOES satellites during geomagnetically disturbed times. We first set the baseline accuracy of the models from a data-model comparison during the intervals of geomagnetically quiet times. During quiet times, we find that all three models exhibit a systematic error of about 10% in the magnetic field magnitude, while the error in the field vector direction is on average less than 1%. We then assess the model accuracy by a data-model comparison during twelve geomagnetic storm events. We find that the errors in both the magnitude and the direction are well maintained at the quiet-time level throughout the storm phase, except during the main phase of the storms in which the largest error can reach 15% on average, and exceed well over 70% in the worst case. Interestingly, the largest error occurs not at the Dst minimum but 2-3 hours before the minimum. Finally, the T96 model has consistently underperformed compared to the other models, likely due to the lack of computation for the effects of ring current. However, the T96 and T01 models are accurate enough for most of the time except for highly disturbed periods.

A Comparative Anatomical Study of Saururus chinensis (Lour.) Baill. and Houttuynia cordata Thunb. (Saururaceae) (삼백초와 약모밀의 내부형태 비교 연구)

  • Yang, Sungyu;Choi, Goya
    • The Korea Journal of Herbology
    • /
    • v.33 no.3
    • /
    • pp.11-18
    • /
    • 2018
  • Objectives : Saururus chinensis and Houttuynia cordata (Saururaceae) are perennial herbs using for medicinal purposes in Korea. The objectives of this study are to compare anatomical key characters between two medicinal plants and to provide fundamental information for the identification of two herbal medicines by using anatomical features. Methods : Cross-sections of root, rhizome, stem, petiole, and leaf for each species were observed in this study. Materials were analyzed through dehydration, paraffin embedding and micro-sectioning, and double staining with Safranin O and Fast-Green FCF. Observations of permanent preparation were conducted using light microscope. Results : S. chinensis and H. cordata were distinguished with anatomical differentiations; Idioblasts with essential oil were scattered in the parenchyma cell of cortex, pith, and phloem of S. chinensis, on the other hand, in H. cordata, idioblasts were distributed ring-shaped in the cortex of the root. S. chinensis had two cycles of vascular bundles in the stem while H. cordata had one cycle. Hypodermis layer was conspicuous in a stem of H. cordata, crystals were observed the only parenchyma in a stem of S. chinensis, and epidermal oil cells were developed in the epidermis of H. cordata. S. chinensis had air cavity at the cortex and pith of the stem. The shape of cross-section was polygonal in the stem of S. chinensis and was circular in the stem of H. cordata. Conclusions : We investigated anatomical study of Korean S. chinensis and H. cordata. To identify two herbal medicines, we considered main anatomical features and provided identification key here.

Fundamental Study of Domestic Wood for the Materials for High-class Furnitures and Woodcrafts -Anatomical & Physical Characteristics of Chestnut Woods Grown in Korea- (국산목재의 고급가구 및 목공예 용재 개발을 위한 기초연구 - 국내산 밤나무 7품종의 해부 및 물리적 특성-)

  • Lee, Seon-Hwa;Kwon, Sung-Min;Park, Byung-Ho;Lee, Sung-Jae;Lee, Uk;Kim, Mahn-Jo;Kim, Nam-Hun
    • Journal of the Korean Wood Science and Technology
    • /
    • v.36 no.6
    • /
    • pp.23-32
    • /
    • 2008
  • Anatomical and physical characteristics of seven cultivars of chestnut wood (Castanea crenata Sieb. et Zucc.), Tanzawa, Ibuki, Mansung, Arima, Ginyose, Tsukuba, and Riheiguri, were investigated to obtain some valuable information for their possibilities to be used for high quality furnitures and woodcrafts. Solitary pore and figured-porous or ring-porous wood types were observed in wide growth rings, and ring-porous in narrow growth rings. Procumbent type was prevalent in ray cells although upright and square types were scarcely existed. Uniseriate, biseriate, and multiseriate rays were observed in tangential section. Uniseriate ray was abundant near the pith, and biseriate and multiseriate rays were frequently existed near the bark. The occurrence rate of biseriate and multiseriate rays was significantly high in Tanzawa, Ibuki, Mansung and Tsukuba, but was somewhat low in Arima, Ginyose and Riheiguri. The inner region showed larger vessel diameter, more vessel number, fewer ray number and higher ray height than the outer region. Growth-ring width in inner region was larger than that in outer region. Growth-rings in inner region of Mansung and Arima were wide while that of Ibuki was narrow. Outer region in all cultivars showed higher latewood percentage than inner region. Especially, Mansung and Tsukuba showed significantly high latewood percentage in their outer region. Green moisture content and density of heartwood were higher than those of sapwood. Tsukuba and Riheiguri had higher green moisture content, and Ibuki and Riheiguri had higher green density than the other chestnut cultivars.

This Study of the Arms Used in the Three Kingdoms (삼국시대(三國時代) 병기체제(兵器體制)의 연구(硏究))

  • Kim, sung-tae
    • Korean Journal of Heritage: History & Science
    • /
    • v.34
    • /
    • pp.20-58
    • /
    • 2001
  • In order to unravel the characteristics of arms used in the 'Three Kingdoms,' Kokuryo, Silla and Paikje. the classification and the developing procedures of the arms should be first discussed. At first, the basic arms of the soldiers of Three Kingdoms were iron swords, iron spearheads, and bows. During that period, swords attached a ring pommel were commonly used. But after 5A. D. a sword with a decoration pommel appeared. Infantry generally used iron spearheads. From the late 4A. D. the long spearheads were broadly used in cavalry battles. In the late 6A. D. infantry mainly used long spearheads, and this resulted in the foundation of long spearheads units. There were two kinds of bows: Short Bow whose arch is small and Long Bow whose arch is long. It is known that the Short Bow was widely used in Kokuryo and Paikje up to 5A. D. In the early era, infantry used Long Bow, yet it was vastly used after 6A. D. when a castle's strategical value was great and defending a castle was. significant. Above mentioned, as basic combat weapons, iron spearhead and bow were fundamental. In particular, the spearhead was the essential weapon to a soldier. Yet, arrow gun and hook-shape cutters were important weapons. Especially, after 6A.D., when a castle became strategically pivotal in military, the arrow gun became the important weapon. This resulted in the foundation of arrow gun units. Hook-shape cutters were used to snatch horsemen or to climb up to fall the castle. Yet, the cutter was not the Three Kingodoms' basic weapon. In addition, the three stages of arms development in the Three Kingdoms are formation stage, development stage, and settlement stage. The formation stage was the period when premitive military unit appeared in the Three Kingdoms. It ranged from 1B. C. to the mid 3A. D. At that time according to regions. there were two weapon systems operating: North area including Kokuryo and the northern part of Paikje and South area including Silla, Kaya and the southern part of Paikje. ln North area a sword with a ring attached at the end of the holder, iron spear with neck and mid-size flat holder and iron arrowhead with an extension to fix, were used. In this period, during a war calvary units were mostly used and their weapon systems seemed possibly to succeed in that of Kochosun. In the development stage, when LoLang's influence on surroundings became weak, Koguryo, Paikjae and Silla had directly contacted each other. In the late 3A.D. to the early 6A.D., Silla achieved a drastic improvement in weapon system. This was the period when Kokuryo played a leading role in arms race. Kokuryo's arms manufacturing techniques passed onto Silla, Kaya and Paikje. In combat strategy a joint operation between infantry and calvary prevailed even if their military tactics were different. In a calvary battle heavily armed horsemen played import roles at this period. The horsemen and even horses were heavily guarded with iron armors. After all, the appearance of fully armed horsemen implies the very need of powerful destructive forces in weapon system. At that time, basic weapons were a big sword with a ring attached at the end of the holder, swallow's tail-shape spear with neck, and iron spearhead with neck and an extension. The settlement stage began at the mid 6A.D., when it was the revolutionary period in the arms development history. Of course, actual proofs and picture documents were not sufficient enough to penetrate full scale of the weapon system. But, according to historical circumstances and historic records, it is very certain that this period was the peak in arms development. In this period special military units, such as infantry-calvary companies, Archery units and Long spear units, that executed particular duties with special weapons, were founded. This became the characteristics of the settlement stage.