• Fashion & Textile Research Journal
• /
• v.22 no.3
• /
• pp.368-377
• /
• 2020

This study provided basic data to develop functional and fitness cycling wear for cyclists. We analyzed the domestic and overseas cycling wear brand patterns for tops and tights as well as compared pads attached to tights. The results were as follows. The tops of the cycling wear were designed with cutting lines in the lateral or yoke in the back to reflect cycling posture. It is necessary to study if there is a difference in the air resistance or fitness of the athlete. The sleeve hem band affected by arm movement during cycling, proper sewing and band pressure are also important. The tights have a brand that does not insert a band in front of the waist in consideration of the cyclist's breathing. It should take into account methods of constructing a proper garment pressure that does not interfere with cycling. Analyzing the cycling pad indicated that the three-dimensional shape and size of the pad show many differences for each brand, indicating a difference in cycling movement suitability. In addition, many of the cutting lines should account for the productive aspects because of the high consumption of the fabric in order to design a pattern considering the cycling posture.

• Fashion & Textile Research Journal
• /
• v.20 no.3
• /
• pp.343-352
• /
• 2018

The objective of this study is to investigate the market of fitness compression wear as well as to design an optimal fitness compression wear by analyzing the muscle and movement characteristics of the elderly women in Korea. In this regard, research for functional garments is needed to increase muscle activity of elderly people during physical exercise. Firstly, we investigated the brand, design, size, material, and pattern of fitness wear based on the market survey. Secondly, we identified preference, evaluation items, evaluation method, and pattern design method based on the literature review. Finally, in addition, the motion type, range, angle to improve the muscle strength of the elderly were investigated and the maximum muscle strengths of each motion were analyzed by using 2007 Size Korea data (n = 386). It is also designed for muscle fatigue through exercise and rapid fatigue recovery after exercise. The evaluation methods for fitness compression wear were classified as motor functionality, physiological comfort, pattern and material suitability evaluations. The muscle strength at leg (pushing force) and waist (lifting force) of the ages of 60 to 69 years old showed 239.3 N and 274.5 N, respectively, which were the lowest forces compared to younger age groups. By applying these results to the design process of fitness wear, it is anticipated that the fitness wear will have a proper fit to the body shape of elderly people in South Korea as well as it can increase muscle efficiency to promote physical capability and healthy life for senior people.

• Fashion & Textile Research Journal
• /
• v.18 no.3
• /
• pp.338-350
• /
• 2016

The purpose of this study is to analyze joint angle for a range of swing motion derived through 3D motion analysis in order to design the ergonomic golf wear, use it for evaluation method of apparel fit to improve exercise functionality and provide the basic materials necessary for designing clothes. In order to do this, the subjects for this study were 3 men of age 20s. The data for a range of motion of golf swing were collected by using equipment for 3D motion analysis and then were used for analysis of joint angles and evaluation method of apparel fit. Range of motion was derived through 3D motion analysis of golf swing motion and joint angles for items of joint motion item and of X, Y, and Z-axis were calculated, respectively. In order to set the evaluation questions for evaluation of apparel fit, to find a range of motion at the maximal value and the minimal value of swing motion. As a result, during the swinging motion, neck extension, right shoulder extension, right/left elbow extension, right/left elbow supination did not appear. Items of joint motion showing the maximum at range of each swing motion were applied into 55 questions and consisted. The results of this study were meaningful as a basic study to apply 3D motion analysis to the fashion industry. It's expected to be used to design functional clothing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.5
• /
• pp.910-920
• /
• 2016

This study is to understand the problems of current police raincoats for professional policemen and conscripted policemen. Interviews and a survey were completed to investigate the wearing conditions of current police raincoats. The questionnaire was composed of questions on current wearing conditions of raincoat, motional adaptability, dimensional compatibility, design suitability and demographic information on the research target. The results indicated that the wearing frequency of raincoats had significant difference according to duty and age range. The main reason for the low wearing frequency was the uncomfortableness of working while wearing the raincoat, followed by the inconvenience of managing the raincoat after use and feeling hot while wearing the raincoat. The three most important factors when wearing a raincoat was pleasantness, activity capability and the functionality of the fabric. The satisfaction on body parts during motions tended to be evaluated lower as the raincoat size increased. The results of the dissatisfaction factors indicated that the raincoat hood had the most problems. There was inconvenience when using the equipment belt because officers have to wear their belts inside the raincoat. In regards to the fabric satisfaction level, respondents were less satisfied with ventilation, hygroscopicity, and drying time. Therefor it appeared that the current raincoat had problems due a lack of functionality in regards to ventilation, hygroscopicity, and quick drying; in addition, the satisfaction on motional adaptability had a significant difference according to raincoat size.

• Ocean Systems Engineering
• /
• v.7 no.3
• /
• pp.179-193
• /
• 2017

Dynamic response analysis of offshore triceratops with stiffened buoyant legs under impact and non-impact waves is presented. Triceratops is relatively new-generation complaint platform being explored in the recent past for its suitability in ultra-deep waters. Buoyant legs support the deck through ball joints, which partially isolate the deck by not transferring rotation from legs to the deck. Buoyant legs are interconnected using equally spaced stiffeners, inducing more integral action in dispersing the encountered wave loads. Two typical nonlinear waves under very high sea state are used to simulate impact and non-impact waves. Parameters of JONSWAP spectrum are chosen to produce waves with high vertical and horizontal asymmetries. Impact waves are simulated by steep, front asymmetric waves while non-impact waves are simulated using Stokes nonlinear irregular waves. Based on the numerical analyses presented, it is seen that the platform experiences both steady state (springing) and transient response (ringing) of high amplitudes. Response of the deck shows significant reduction in rotational degrees-of-freedom due to isolation offered by ball joints. Weak-asymmetric waves, resulting in non-impact waves cause steady state response. Beat phenomenon is noticed in almost all degrees-of-freedom but values in sway, roll and yaw are considerably low as angle of incidence is zero degrees. Impact waves cause response in higher frequencies; bursting nature of pitch response is a clear manifestation of the effect of impact waves on buoyant legs. Non-impact waves cause response similar to that of a beating phenomenon in all active degrees-of-freedom, which otherwise would not be present under normal loading. Power spectral density plots show energy content of response for a wide bandwidth of frequencies, indicating an alarming behaviour apart from being highly nonlinear. Heave, being one of the stiff degrees-of-freedom is triggered under non-impact waves, which resulted in tether tension variation under non-impact waves as well. Reduced deck response aids functional requirements of triceratops even under impact and non-impact waves. Stiffened group of buoyant legs enable a monolithic behaviour, enhancing stiffness in vertical plane.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.127-127
• /
• 2018

Probiotics are microorganisms that have beneficial effects on the health of the host. The health promoting effect by probiotics influences suppressing harmful bacteria, prevention of constipation, blood cholesterol reduction and regulation of blood pressure. Prebiotics are used to promote the growth or activity of microorganisms. Synbiotics, which are a mixture of probiotics and prebiotics, synergize in the intestines by complementing each other. Synbiotics not only improves the viability of the probiotics while passing through the gastrointestinal tract, maintain intestinal homeostasis, but also regulate balance of harmful and useful bacterial growth. Glycine max Merr (GMM) has been widely used in Asian countries to treat cancer, obesity, oxidative stress and imbalanced immune diseases. In addition, it has been reported that dietary fiber-rich grains promote bowel movements and prevent constipation. In this study, we investigated the viability of LactobacillIus buchneri (L.buchneri) strains, known as lactic acid bacteria under conditions of gastric fluid and intestinal fluid to determine the suitability of L.buchneri as probiotics. The adhesion ability of L.buchneri to caco-2 cells was also confirmed. The present studies showed that GMM extract promoted the growth and activity of L.buchneri strains as prebiotics. Also, this results suggested that the mixture of L.buchneri and GMM extract can helps maintain intestinal health and healthy body as synbiotics and health functional food material.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.135-145
• /
• 2011

As communication technology, an enabling technology for ITS, becomes diversified with DSRC, CDMA, Wireless LAN, it is expected that type and function of ITS services will become gradually expanded. As a result, research and development of a standard platform that can provide support so that numerous communication technologies that are being used in various ITS services to receive various ITS services can be operated in one integrated terminal are being carried out. On Board Unit (OBU) for a recent standard platform was also built and tested recently. However, verification for standard suitability of the standard platform OBU that was developed must be carried out. Standard technology must be realized and sufficient functional and operational testing must be carried out in order to guarantee efficient operation in an actual ITS system and increase utilization of standard technology. Therefore, In this paper we had constructed test road and we had tested a standard platform OBU for a standard application.

• The Korean Journal of Community Living Science
• /
• v.26 no.3
• /
• pp.499-509
• /
• 2015

Efforts to have children consume milk continue across the world for the sufficient supply of calcium and protein. This study examines the frequency and amount of dairy milk and the recognition, acceptability, and knowledge of milk and dairy products by considering fifth- and sixth-graders in Hwaseong, Korea. The acceptability of milk and dairy products measured based on a five-point Likert-type scale was assessed to determine its correlations with breakfast frequency, the frequency of milk intake, and milk knowledge. According to descriptive statistics, 47% and 53% of the subjects were fifth- and sixth-graders, respectively, 53% and 47% were male and female, respectively, 45.3% and 51.2% had mothers in their thirties and forties, respectively, and 57% had working mothers. Breakfast frequency was 5.2 and 5.3 times per week, and milk and dairy intake was 4.6 times. The milk knowledge score was 5.3 out of 10 points. The average daily intake of milk was a cup (55.1%), and a vast majority preferred white milk (68.6%). Ice cream bar type (4.49 points) and cone type (4.48 points) showed the highest acceptability, and breakfast frequency was positively correlated with white milk and cheddar cheese (p<0.01). Daily milk intake frequency was positively correlated with white milk and fortified milk. Milk knowledge was positively correlation with white milk, fortified milk, functional yogurt (p <0.05), fermented milk, and cheese (p<0.01). The higher the breakfast frequency, the more likely the intake of white milk (p<0.01). An increase in milk intake increased milk knowledge (p<0.05). The higher the level of knowledge, the more likely the intake of fortified milk and the frequency of milk intake. These results suggest that school lunch milk may increase awareness and milk intake through continuing education in milk knowledge. High acceptability scores for white milk, fortified milk, and fermented milk indicate their suitability for school milk consumption.

• Journal of the Korean Home Economics Association
• /
• v.43 no.5 s.207
• /
• pp.235-248
• /
• 2005

The objective of the study was to design a Battle Dress Uniform(BDU with improved motional flexibility, body fit, and protectiveness to cope with the special operational environment of the subjects. For this purpose, the researcher conducted a questionnaire survey on 92 male members of Special Weapon Attack Team(SWAT units in a former study, and based on the results of the survey, made the two-piece and one- piece BDU samples to overcome the identified problems and inconveniences. The sample uniforms were designed ergonomically from five aspects. Subsequentlv, the new BDU was compared with the current operational uniform in terms of outward appearance(design and fit), motional flexibility, and suitability for field activities. The samples were evaluated by 5 SWAT members as subjects and 8 graduate school students majoring in clothing and textiles as experts. According to the results, the two-piece and one-piece samples gained higher scores than the existing operational uniform in terms of outward appearance(design and fitness) and motional flexibility, and the one-piece sample was preferred with regard to fit when worn by the subjects with their full kit for field operations. That is, the one-piece sample appeared to be more suited to the special work environment of SWAT and to be more functional in terms of ease of putting on and taking off, motional flexibility, body fit and protectiveness than the current operational uniform(two-piece type).

• KSBB Journal
• /
• v.24 no.4
• /
• pp.341-346
• /
• 2009

Candida Antarctica lipase A (CalA) has been used because of its suitability in industrial applications. CalA has unique features capable to accept tertiary and sterically hindered alcohols among many hydrolases. CalA gene was cloned and constructed in expression vector such as pColdIII/CalA and $pPICZ{\alpha}A$/CalA. The gene encoding pColdIII/CalA was functionally expressed in the cytoplasm of Escherichia coli $Origami^{TM}$ B (DE3) cells. The plasmid $pPICZ{\alpha}A$/CalA linearized by BstX I was integrated into 5'AOX1 region of the chromosomal DNA and was functionally expressed in the methyl atrophic yeast Pichia pastoris. Expressed CalA in P. pastoris (0.7 Unit/mL) showed 35 times higher activity than that in E. coli expression system (0.02 Unit/mL).