• Journal of Nutrition and Health
• /
• 제28권7호
• /
• pp.675-687
• /
• 1995

The purpose of this study were to analyze work patterns of clinical dietitians by time study, to investigate labor time used in each clinical dietetic activity, and to develop standardized indices of clinical dietetic staffing needs. Two general hospitals(A & B) in Seoul were selected for study. The results of this study can be summarized as follows. 1) For the A hospital, the percentage of clinical dietetic activities such as attending meeting, professional research, foodservicemanagement, clerical activity for the foodservice, administrative activity and delay were 17.5%, 1.3%, 14.5%, 23.4%, 21.3%, 4.6%, and 17.3% respectively, while 22.4% 3.5%, 23.7%, 10.9%, 15.8%, 4.2%, and 19.5% respectively for the B hospital. 2) For the A hospital, the percentage of direct patient care like outpatient nutrition education, group nutrition education, and patient meal planning were 69.5%, 10.5%, 7.6%, and 12.4% respectively while 78.9%, 7.3%, 8.9%, and 5.1% respectively for the B hospital. 3) Time spent for performing direct patient care such as basic care, intermediate care, and indepth care per patient were 28.0min, 73.1min, and 53.0 min respectively for the A hospital, while 45.3 min, 76.2 min, and 52.6 min respectively for the B hospital. 4) Full time clinical dietitian staffing needs were calculated for the three parts ; basic care, intermediate care, and in-depth care. For A hspital, the appropriate numbers of full time clinical dietitian were 3.5 persons in basic care, 3.6 persons in intermediate care, and 1.3 persons in in-depth care, while 6.1 persons, 6.3 persons, 3.2 persons respectively for B hospital.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2503-2508
• /
• 2005

In this paper, we propose a new discrete-time predictive current controller for a PMSM(Permanent Magnet Synchronous Motor). The main objectives of the current controllers are to ensure that the measured stator currents tract the command values accurately and to shorten the transient interval as much as possible, in order to obtain high-performance of ac drive system. The conventional predictive current controller is hard to implement in full digital current controller since a finite calculation time causes a delay between the current sensing time and the time that it takes to apply the voltage to motor. A new control strategy in this paper is seen the scheme that gets the fast adaptation of transient current change, the fast transient response tracking. Moreover, the validity of the proposed method is demonstrated by numerical simulations and the simulation results will present the improvements of predictive controller and accuracy of the current controller.

• ETRI Journal
• /
• 제38권6호
• /
• pp.1240-1249
• /
• 2016

With the number of IP cores in a multicore system-on-chip increasing to up to tens or hundreds, the role of on-chip interconnection networks is vital. We propose a networks-on-chip-style bus network as a compromise and redefine the exploration problem to find the best IP tiling patterns and communication path combinations. Before solving the problem, we estimate the time complexity and validate the infeasibility of the solution. To reduce the time complexity, we propose two fast exploration algorithms and develop a program to implement these algorithms. The program is executed for several experiments, and the exploration time is reduced to approximately 1/22 and 7/1,200 at the first and second steps of the exploration process, respectively. However, as a trade-off for the time saving, the time cost (TC) of the searched architecture is increased to up to 4.7% and 11.2%, respectively, at each step compared with that of the architecture obtained through full-case exploration. The reduction ratio can be decreased to 1/4,000 by simultaneously applying both the algorithms even though the resulting TC is increased to up to 13.1% when compared with that obtained through full-case exploration.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.191-192
• /
• 2014

Multiple output converters (MOCs) are widely used for applications which require various levels of the output voltages due to their benefits in cost, volume, and efficiency. However, most of the MOCs developed so far can regulate only one output tightly and require as many secondary windings in the transformer as the number of the outputs. In this paper, a novel Time Division Multiple Control (TDMC) method to regulate all the outputs in high precision is proposed and applied for the multiple output battery charger based on the phase shift full bridge topology to charge a multiple number of batteries at one time. The proposed converter can charge three different kinds of batteries or same kind of batteries in different state of charges (SOCs) by using constant current/constant voltage (CC/CV) charge mode independently. At the same time it can provide an even degree of tight regulation for each output to satisfy the strict ripple requirement of the battery. The validity and feasibility of the proposed method are verified through the experiments.

• 한국산림과학회지
• /
• 제103권3호
• /
• pp.353-358
• /
• 2014

다래의 수확적기를 판정할 수 있는 기초자료를 제공하고자 다래 신품종 '새한', '대성' 및 '칠보'의 생육시기별 과실품질과 후숙 특성을 조사하였다. 과실의 비대는 '새한', '대성' 및 '칠보'의 경우 각각 만개 후 66일, 85일 및 78일 까지 진행되었다. 생장곡선은 3품종 모두 이중 S자형으로 나타났다. 상관분석 결과 세 품종 모두 과실 무게가 증가할수록 과실 내 종자수가 많아지는 정의 상관관계가 있었다(r = 0.94~0.97, p<0.01). 과실의 크기, 가용성 고형물 함량 및 산함량에서 품종 간 및 과실의 생육시기 간에 통계적인 유의적 차이가 있었다. 산함량은 3품종 모두 수확적기까지 증가하였고, 수확적기의 산함량은 '새한' 1.77%, '대성' 1.22%, '칠보' 1.37%로 나타났다. 수확 후 후숙 특성을 조사한 결과 수확적기의 만개 후 생육일수는 '새한'이 108일(9월 23일), '대성'과 '칠보'가 92일(9월 9일)로 나타났다.

• 대한지역사회영양학회지
• /
• 제24권4호
• /
• pp.331-342
• /
• 2019

Objectives: This study examines the intake of food and nutrients of children according to the employment and working hours of their mothers. Methods: The married women in the source data from the 6th National Health and Nutrition Survey were classified into full-time working mothers, part-time working mothers and housewives according to the working type and the data on their children from 3 to 18 years old were analyzed using SAS 9.4. Results: The group from 3 to 5 years old was the smallest group with 682 children (20.2%), followed by the group from 6 to 11 years with 1,345 children (39.8%) and the group from 12 to 18 years old with 1,355 children (40.1%). The lowest rates for having no breakfast and dinner were observed in the group with housewives (p<0.05). The calcium and phosphorous intakes were the highest in the group with housewives at 61.9% and 126.8%, respectively, and the lowest in the group with full-time working mothers at 54.7% and 115.3%, respectively (p<0.05). The group with full-time working mothers had the highest rate in the calcium and iron intake less than the dietary reference intake at 74.9% and 30.0%, respectively. It indicated that the group with full-time working mothers did not have sufficient nutrients as compared to the other two groups. Moreover, the group with the part-time working mothers showed the high vitamin A intake ratio of 41.4% (p<0.05). Conclusions: This study found evidence of a negative association between mother's employment status and children's diet quality. The employment and economic activity of married women will continuously increase in the future. Therefore, a national nutrition policy is required to provide quality nutrition care for children in the households.

• 지역연구
• /
• 제35권2호
• /
• pp.59-71
• /
• 2019

우리나라 연평균 근로시간은 OECD 최상위 수준이다. 장시간 근로는 근로자의 생산성을 저해하고 일과 가정의 양립을 방해하는 등 삶의 질을 하락시키는 요인이 된다. 최근 정부는 시간제 일자리를 증가하는 등 유연근로제를 장려하고 있지만, 양질의 시간제 일자리가 부족한 현실이다. 시간제 근로는 일과 개인의 삶을 병행할 수 있게 하지만, 동시에 열악한 근로환경과 부정적인 사회적 시선을 보유하여 개인의 삶의 만족도에 미치는 영향이 전일제 근로와는 다를 것으로 예상된다. 특히 여성의 경우 노동시장에서 성별 격차를 경험하고 있으며, 일과 가정의 병행이라는 측면에서 시간제 근로가 삶의 만족도에 미치는 영향이 남성과 다르게 나타날 수 있다. 본 연구는 2017년도 "서울서베이 도시정책지표조사" 자료를 활용하여 근무유형-성별의 교차효과가 개인의 삶의 만족도에 미치는 영향을 순서형 로지스틱 회귀모형을 통해 실증적으로 분석하였다. 분석결과에 따르면, 삶의 만족도는 전일제 여성, 전일제 남성, 시간제 여성, 시간제 남성 순으로 높은 것으로 나타났다. 또한 시간제 여성 근로자가 낮은 삶의 만족도를 가질 확률이 가장 높은 반면, 높은 삶의 만족도를 가질 확률은 가장 낮게 나타났다. 대조적으로 전일제 남성 근로자는 낮은 삶의 만족도를 가질 확률이 가장 낮은 반면, 높은 삶의 만족도를 가질 확률은 가장 높은 것으로 나타났다.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.236-248
• /
• 2017

A direct stator flux vector control scheme in discrete-time domain is proposed in this paper for the interior permanent magnet synchronous motor (IPMSM) drive to remove the proportional-integral (PI) controller from the direct torque control (DTC) scheme applied to IPMSM and to obtain faster dynamic response and lower torque ripple output. The output of speed outer loop is used as the desired torque angle instead of the desired torque in the proposed scheme. The desired stator flux vector in dq coordinate is calculated with a given amplitude. The state-space equations in discrete-time for IPMSM are established, the actual stator flux vector is estimated in deadbeat manner by a full-order state observer, and then the closed-loop control is achieved by the pole placement. The stator flux error vector is utilized to calculate the reference stator voltage vector. Extracting the angle position and amplitude from the estimated stator flux vector and estimating the output torque are eliminated for the direct feedback control of the stator flux vector. The proposed scheme is comparatively investigated with a PI-SVM DTC scheme by experiment results. Experimental results show the feasibility and advantages of the proposed control scheme.

• 제어로봇시스템학회논문지
• /
• 제5권6호
• /
• pp.698-704
• /
• 1999

There are several types of defects of SMDs mounted on PCB, that is, missing components, misalignment, wrong parts and poor solder joints. This research study mainly focuses on measuring of deviation of SMD leads using the partial image of component, not using the full image. This processing based on the partial image has the advantage of the reduction in calculation time compared to the full image. Since position of lead is calculated with respect of the reduction in calculation time compared to the full image. Since position of lead is calculated with respect to pad, the accuracy of the system is not dependent on percise positioning stage. The grabbed image of gray scale is converted into binary format using a cutomatic threshold. After small fragments in the image is removed by a series of morphology operations such as opening and closing, the centroids of PCB pads and SMD leads is obtained together with labeling of blobs. Translational shift and rotationial angle of SMD are succedingly estimated using above information and chip data. The expression that can calculate the maximum deviation of leads with respect to PCB pads has been derived, and inferior mounting of SMD is judged by a given criterion. Some experiments have been executed to verify this measuring scheme.

• Corrosion Science and Technology
• /
• 제21권4호
• /
• pp.314-324
• /
• 2022

The objective of this investigation was to indentify major factors affecting surface roughness among various parameters of electropolishing process using the design of an experiment method (full factorial design) for UNS S31603. Factors selected included electrolyte composition ratio, applied current density, and electrolytic polishing time. They were compared through analysis of variance (ANOVA). Results of ANOVA revealed that all parameters could affect surface roughness, with the influence of electrolyte composition ratio being the highest. As a result of surface analysis after electropolishing, the specimen with the deepest surface damage was about 35 times greater than the condition with the smallest surface damage. The largest value of surface roughness after electropolishing was higher than that of mechanical polishing due to excessive processing. On the other hand, the smallest value of surface roughness after electropolishing was 0.159 ㎛, which was improved by more than 80% compared to the previous mechanical polishing. Taken all results together, it is the most appropriate to perform electrolytic polishing with a sulfuric acid and phosphoric acid ratio of 3:7, an applied current density of 300 mA/cm², and anelectrolytic polishing time of 5 minutes.