• Steel and Composite Structures
• /
• v.21 no.5
• /
• pp.1045-1067
• /
• 2016

Concrete bridges with corrugated steel webs and prestressed by both internal and external tendons have emerged as one of the promising bridge forms. In view of the different behaviour of components and the large shear deformation of webs with negligible flexural stiffness, the assumption that plane sections remain plane may no longer be valid, and therefore the classical Euler-Bernoulli and Timoshenko beam models may not be applicable. In the design of this type of bridges, both the ultimate load and ductility should be examined, which requires the estimation of full-range behaviour. An analytical sandwich beam model and its corresponding beam finite element model for geometric and material nonlinear analysis are developed for this type of bridges considering the diaphragm effects. Different rotations are assigned to the flanges and corrugated steel webs to describe the displacements. The model accounts for the interaction between the axial and flexural deformations of the beam, and uses the actual stress-strain curves of materials considering their stress path-dependence. With a nonlinear kinematical theory, complete description of the nonlinear interaction between the external tendons and the beam is obtained. The numerical model proposed is verified by experiments.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.2
• /
• pp.78-85
• /
• 2003

This study aims to investigate the effect of partially distributed loads on the static behavior of parabolic arches by using the elastic-plastic finite element model. For this purpose, the vertical, the radial, and the anti-symmetric load cases are considered, and the ratio of loading range and arch span is increased from 20% to 100%. Also, the elastic-visco-plastic analysis has been carried out to estimate the elapse time to reach the stable state of arches when the ultimate load obtained by the finite element analysis is applied. It is noted that the ultimate load carrying capacities of parabolic arches are 6.929 tf/$m^2$ for the radial load case, and 8.057 tf/$m^2$ for the vertical load case. On the other hand, the ultimate load is drastically reduced as 2.659 tf/$m^2$ for the anti-symmetric load case. It is also shown that the maximum ultimate load occurs at the full ranging distributed load, however, the minimum ultimate loads of the radial and vortical load cases are obtained by 2.336 tf/$m^2$, 2.256 tf/$m^2$, respectively, when the partially distributed load is applied at the 40% range of full arch span.

• The Korean Journal of Financial Management
• /
• v.26 no.2
• /
• pp.181-201
• /
• 2009

This study is on the forecasting performance analysis of range volatility estimators(Parkinson, Garman and Klass, and Rogers and Satchell) relative to historical one using two-scale realized volatility estimator as a benchmark. American sub-prime mortgage loan shock to Korean stock markets happened in sample period(January 2, 2006~March 10, 2008), so the structural change somewhere within this period can make a huge influence on the results. Therefore sample was divided into two sub-samples by May 30, 2007 according to Zivot and Andrews unit root test results. As expected, the second sub-sample was much more volatile than the first sub-sample. As a result of forecasting performance analysis, Rogers and Satchell volatility estimator showed the best forecasting performance in the full sample and relatively better forecasting performance than other estimators in sub-samples. Range volatility estimators showed better forecasting performance than historical volatility estimator during the period before the outbreak of structural change(the first sub-sample). On the contrary, the forecasting performance of range volatility estimators couldn't beat that of historical volatility estimator during the period after this event(the second sub-sample). The main culprit of this result seems to be the increment of range volatility caused by that of intraday volatility after structural change.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.8
• /
• pp.1055-1063
• /
• 2014

Power losses of a 1-stage DC-DC converter and 2-stage DC-DC converter are compared in this paper. A phase-shift full-bridge DC-DC converter is considered as 1-stage topology. This topology has disadvantages in the stress of rectifier diodes because of the resonance between the leakage inductor of the transformer and the junction capacitor of the rectifier diode. 2-stage topology is composed of an LLC resonant full-bridge DC-DC converter and buck converter. The LLC resonant full-bridge DC-DC converter does not need an RC snubber circuit of the rectifier diode. However, there is the drawback that the switching loss of the buck converter is large due to the hard switching operation. To reduce the switching loss of the buck converter, SiC MOSFET is used. This paper analyzes and compares power losses of two topologies considering temperature condition. The validity of the power loss analysis and calculation is verified by a PSIM simulation model.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1224-1232
• /
• 2014

A full-bridge secondary dual-resonant DC-DC converter using the asymmetrical pulse-width modulated (APWM) strategy is proposed in this paper. The proposed converter achieves zero-voltage switching for the power switches and zero-current switching for the rectifier diodes in the whole load range without the help of any auxiliary circuit. Given the use of the APWM strategy, a circulating current that exists in a traditional phase-shift full-bridge converter is eliminated. The voltage stress of secondary rectifier diodes in the proposed converter is also clamped to the output voltage. Thus, the existing voltage oscillation of diodes in traditional PSFB converters is eliminated. This paper presents the circuit configuration of the proposed converter and analyzes its operating principle. Experimental results of a 1 kW 385 V/48 V prototype are presented to verify the analysis results of the proposed converter.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.35.1-35.1
• /
• 2011

The solar X-ray telescopes, the Yohkoh SXT and the Hinode XRT, have observed for a couple of decades a variety of coronal structures in the range of wide field-of-view (FOV) covering the full solar disk. It has been emphasized that the optical structure of solar telescopes should be designed with care for improving the uniformity over the full FOV. The vignetting effect is one of the important optical characteristics for describing the performance of a telescope, which reflects the ability of collecting the incoming light at different locations and different photon energies. The correction of this vignetting effect would be an important calibration step that should be performed in advance, especially when the observed images are to be used for photometric purposes. Since the vignetting effect of solar X-ray telescopes shows wavelength dependence, a special care should be taken when, for example, performing the temperature analyses with thin and thick filters for flaring activities observed at the periphery of the full FOV. The results of analysis of pre-launch calibration data for the evaluation of vignetting effect will be introduced in detail.

• YAKHAK HOEJI
• /
• v.31 no.2
• /
• pp.116-125
• /
• 1987

It is still difficult and time consuming to obtain cDNA sequences that contain the entire nucleotide sequence of the corresponding mRNA. A rapid and high efficient cloning method to obtain full-length cDNA segments is thus developed. The cloning procedure described here consists of the construction of oligo(dT)-tailed vector primer using pWR34 plasmid, polyadenylation of mRNA-cDNA heteroduplex using terminal deoxytransferase, and replacement of MRNA strand with DNA by RNase H and DNA polymerase I. The restriction endonuclease analysis shows that the size of inserted-cDNA is in the range of 1.5~4.0 kb long suggesting that most of cloned cDNA are full-length or nearly full-length cDNA. The plasmid-DNA recombinants obtained were 4$\times$$10^5$~$10^{6}$ per $\mu\textrm{g}$ of rat liver poly (A$^+$)mRNA, which is 4 to 10 fold higher cloning efficiency in comparison to the presently used methods for full-length cDNA cloning. The results indicate that the described cloning system is much simpler, less time consuming, and very efficient cloning method to construct a cDNA library.

• Physical Therapy Rehabilitation Science
• /
• v.3 no.1
• /
• pp.69-75
• /
• 2014

Objective: We developed a Motor-Assisted Rowing Machine (MARM) for Spinal Cord Injury (SCI), by modification of the Concept II rowing machine, so that the seats could be operated automatically in a backward and forward direction by a motor. Design: Case report. Methods: Motor rowing consisted of a chair with inclination control, a motor system, control button, monitor, program, leg supporter, safety belt, and seat. The patients were 2 men rowing athletes with SCI, classified as American Spinal Injury Association class B, participated in the study. Level of thoracic injury ranged from T8 to T10. The subjects rowed at a self-selected stroke rate with 50 watts. Two different rowing methods (static rowing without movement of the seat, dynamic rowing using MARM) were assigned to each participant during 10 minutes; 34 reflective markers were attached to their full bodies. Kinematic data were collected using the Vicon motion analysis system. Based on the full body model provided as a default by the equipment. In the rowing exercise, the rowing motions were divided into Drive Phase and Recovery Phase. Results: The two rowing methods differ in handle range, seat range, handle and seat ratio, handle velocity, and seat velocity during static and dynamic rowing. The rowing exercise using a rowing machine developed MARM increased tendency to the range of motion in the dynamic method compared to the static method. Conclusions: The newly developed MARM could be a useful whole body exercise for people with SCI.

• Clinics in Shoulder and Elbow
• /
• v.17 no.1
• /
• pp.25-30
• /
• 2014

Background: Normal elbow joint kinematics has been widely studied in cadaver, whilst in vivo study, especially of the forearm, is rare. Our study analyses, in vivo, the kinematics of normal forearm and of malunited forearm using a three-dimensional computerized simulation system. Methods: We examined 8 patients with malunited Monteggia fracture and 4 controls with normal elbow joint. The ulna and radius were reconstructed from CT data placing the forearm in three different positions; full pronation, neutral, and full supination using computer bone models. We analyzed the axis of rotation 3-dimentionally based on the axes during forearm rotation from full pronation to full supination. Results: Axis of rotation of normal forearm was pitch line, with a mean range of 2 mm, from full pronation to full supination, connecting the radial head center proximally and ulnar fovea distally. In normal forearm, the mean range was 1.32 mm at the proximal radioulnar joint and 1.51 mm at the distal radioulnar joint. However in Monteggia fracture patients, this range changed to 7.65 mm at proximal and 4.99 mm at distal radoulnar joint. Conclusions: During forearm rotation, the axis of rotation was constant in normal elbow joint but unstable in malunited Monteggia fracture patients as seen with radial head instability. Therefore, consideration should be given not only to correcting deformity but also to restoring AOR by 3D kinematics analysis before surgical treatment of such fractures.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.4
• /
• pp.517-525
• /
• 1996

A Simple AC complex circuit analysis for LCL type series resonant converter with phase shift control is proposed. Based on these analyses, a set of characteristic curves which allows a optimal design procedure for this converter is shown, without increasing the volt-ampere rating of tank circuit Especially, inverter output peak current can be minimized in both full load and partial load conditions. The presented design considerations can make the load range wide from full loads to light loads achieving turn-on with zero voltage switching (ZVS) operation. The detailed analysis and experimental results show the effectiveness of the proposed design algorithms. (author). refs., figs., tab.