• 전력전자학회논문지
• /
• 제18권4호
• /
• pp.305-311
• /
• 2013

This paper proposes a performance improvement of existing single-phase current-fed qZ-Source inverter. Voltage gain of the traditional voltage-fed full-bridge inverter and single-phase current-fed qZ-source inverter is only equal to or smaller than input voltage. The proposed inverter can obtain twice higher voltage gain than the single-phase current-fed qZ-Source inverter by adding an extra switch and a capacitor in the circuit. In addition, the proposed inverter shares the common ground between dc input and ac output voltage. Therefore, the proposed inverter can eliminate the possible ground leakage current problem when it is used for grid-tied photovoltaic inverter system. A 120 W prototype inverter is built and tested to verify performances of the proposed inverter.

• Journal of Power Electronics
• /
• 제12권3호
• /
• pp.387-398
• /
• 2012

It is known that transformer based power supplies for ozone generators have low efficiency, high cost and exhibits a limited frequency range of operation. To overcome these disadvantages, this paper proposes a high frequency ozone generator with the absence of a transformer. The voltage step-up is achieved only by utilizing the resonant tank. This is made possible by a novel combination of ozone chamber materials that allow ozone to be generated at only 1.5 - 3.5 $kV_{p-p}$. The input to the resonant tank is driven by a PWM full bridge resonant inverter. Furthermore, zero-current zero-voltage switching (ZCZVS) operation is achieved by employing a duty factor of 25% between the switches of the full bridge. The advantages of the proposed system include high efficiency, low cost and the ability to control ozone production by varying the input voltage to the inverter. The prototype is verified by both simulation and experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1313-1315
• /
• 2002

This paper proposes an inverter for the grid-connected photovoltaic system based on the transformer-less inverter. This system consists of a high frequency inverter bridge, high frequency transformer, diode bridge rectifiers, a DC filter, a low frequency inverter bridge, and an AD filter. The high frequency inverter bridge switching at 20kHz is used to generate bipolar PWM pulse, which is subsequently rectified by diode bridge rectifiers to result in a full-wave rectified sine wave. Finally, it is unfolded by a low frequency inverter bridge to result in a 60Hz sine wave power output. In this paper, the control algorithm for synchronous current feedback control method and a maximum power point tracking (MPPT) method using DSP are described. And, the simulation and experimental results are shown to verify the validity of the proposed system.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권4호
• /
• pp.366-373
• /
• 2005

This paper presents two new circuit topologies of the dc busline side active resonant snubber assisted voltage source high frequency link soft switching PWM full-bridge dc-dc power converters acceptable for either utility ac 200V-rms or ac 400V-rms input grid. These high frequency switching dc-dc converters proposed in this paper are composed of a typical voltage source-fed full-bridge PWM inverter, high frequency transformer with center tap, high frequency diode rectifier with inductor input filter and dc busline side series switches with the aid of a dc busline parallel capacitive lossless snubber. All the active switches in the full-bridge arms as well as dc busline snubber can achieve ZCS turn-on and ZVS turn-off transition commutation with the aid of a transformer leakage inductive component and consequently the total switching power losses can be effectively reduced. So that, a high switching frequency operation of IGBTs in the voltage source full bridge inverter can be actually designed more than about 20 kHz. It is confirmed that the more the switching frequency of full-bridge soft switching inverter increases, the more soft switching PWM dc-dc converter with a high frequency transformer link has remarkable advantages for its power conversion efficiency and power density implementations as compared with the conventional hard switching PWM inverter type dc-dc power converter. The effectiveness of these new dc-dc power converter topologies can be proved to be more suitable for low voltage and large current dc-dc power supply as arc welding equipment from a practical point of view.

• Journal of Power Electronics
• /
• 제14권5호
• /
• pp.918-925
• /
• 2014

This study presents an extended boost single-phase qZ-source DC-AC inverter for a single-phase photovoltaic system. Unlike the previously proposed single-phase qZ-source and semi-qZ-source inverters that achieve the same output voltage as that of the traditional voltage-fed full-bridge inverter, the proposed inverter can obtain higher output than input voltage. The proposed inverter also shares a common ground between DC input voltage and AC output voltage. Thus, possible ground leakage current problem in non-isolated grid-tied inverters can be eliminated with the proposed inverter. A 120 W prototype inverter is built and tested to verify the performance of the proposed inverter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.1963-1965
• /
• 1998

In this paper, a new simplified configuration for a multi-level PWM inverter is proposed. The proposed inverter consists of an auxiliary circuit with one switching device, and 3 phase full-bridge inverter. The proposed inverter, in spite of reduction of the switching devices, offers characteristics similar to the NPC(Neutral - point - clamped)- PWM inverter. Also, since the reduction of the switching devices, the control strategy is simplified. And switching loss is reduced. In addition to, it is possible that reliable DC level voltage than former multi-level inverter. And load power application is same to conventional NPC-PWM inverter. The performance of the system is verified by simulation. In this paper, show the simulation result of the single phase full bridge inverter application.

• Journal of Power Electronics
• /
• 제9권4호
• /
• pp.593-603
• /
• 2009

This paper proposes and describes the design and operational principles of a three-phase three-level nine switch voltage source inverter. The proposed topology consists of three bi-directional switches inserted between the source and the full-bridge power switches of the classical three-phase inverter. As a result, a three-level output voltage waveform and a significant suppression of load harmonics contents are obtained at the inverter output. The harmonics content of the proposed multilevel inverter can be reduced by half compared with two-level inverters. A Fourier analysis of the output waveform is performed and the design is optimized to obtain the minimum total harmonic distortion. The full-bridge power switches of the classical three-phase inverter operate at the line frequency of 50Hz, while the auxiliary circuit switches operate at twice the line frequency. To validate the proposed topology, both simulation and analysis have been performed. In addition, a prototype has been designed, implemented and tested. Selected simulation and experimental results have been provided.

• 전기전자학회논문지
• /
• 제26권4호
• /
• pp.584-589
• /
• 2022

고전압 태양광 패널에서 단상 계통으로의 직류-교류 전력 변환을 위해 벅부스트 컨버터에 풀브리지 인버터를 종속적으로 연결하는 두 단계의 무변압기 인버터가 주로 사용된다. 태양광 패널의 큰 기생 커패시턴스에 기인하는 과도한 누설 전류를 피하기 위해 풀브리지 인버터는 단극성 PWM에 비해 훨씬 더 많은 전력 손실을 초래하는 양극성 PWM으로만 스위칭할 수 있다. 그런 낮은 효율을 개선하기 위해 본 논문은 벅부스트 컨버터에 회로 절연을 위한 IGBT와 다이오드를 하나씩 추가한 새로운 토폴로지를 제안한다. 제안된 회로 절연 방식은 누설 전류를 증가시키지 않으면서 풀브리지 인버터에서 단극성 PWM을 가능케 함으로써 전체 효율을 개선한다. 제안된 방법의 타당성은 컴퓨터 시뮬레이션과 전력 손실 계산을 통해 검증한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.989-991
• /
• 2001

The new converter topology using full bridge inverter for the switched reluctance motor drives is proposed. The proposed SRM drives are supplied by the pulse voltage source, while the conventional drives are supplied by dc voltage source. Proposed converter maintains the characteristics of asymmetric bridge converter and has advanced characteristics.

• 전력전자학회논문지
• /
• 제9권5호
• /
• pp.438-447
• /
• 2004

본 논문에서는 하프ㆍ풀-브리지 셀을 이용하는 새로운 멀티레벨 인버터를 제안하고 독립형 태양광 인버터로서의 가능성을 평가한다. 기본 회로 구조는 기존의 11-레벨형 PWM 인버터에 기초하며 세 개의 풀-브리지 모듈 중 하나의 모듈을 하프-브리지 구조로 대체한다. 이 간단한 회로 구조의 변경으로 제안된 멀티레벨 인버터는 세 가지의 장점을 가지게 된다. 첫째, 출력 전압 레벨 수의 증가를 통해 보다 정현적인 출력 전압 파형을 형성 시킬 수 있다. 둘째, 풀-브리지 모듈 대신 하프-브리지 셀을 이용하므로 두 개의 전력 스위치를 줄일 수 있다. 셋째, 쵸핑용으로 이용되는 인버터와 결합된 변압기에 의해 부하로 전달되는 전력량을 저감 시킬 수 있어 전체 효율 개선에 유리하다. 즉, 대부분의 전력은 저주파 스위칭 동작으로 기본 출력전압을 형성하는 인버터와 이와 결합된 변압기에 의해 부하단으로 전달되고, 고주파 스위칭을 하는 쵸핑용 인버터와 이와 결합된 변압기를 통한 출력은 최종 출력전압을 보다 정현화 하기 위한 목적으로 사용되도록 한다. 기존의 11-레벨형 PWM 인버터와 비교를 통해 제안하는 인버터를 평가하고, 컴퓨터 시뮬레이션 및 실험 결과를 통해 독립형 태양광 인버터로서의 가능성을 입증한다.