• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1215-1217
• /
• 2000

For the application of soft-switching technique to single Phase-full bridge inverter. in this paper ZCT(Zero Current Transition) and ZVT(Zero Voltage Transition) techniques proposed previously are compared and discussed the merit and demerit of both. Both have a excellency that can reduce the number of auxiliary switch and resonant circuit compared to other techniques and achive soft-switching in auxiliary switch itself. Therefore, it has enabled us to have benifits of realizing high efficiency and reliability, low EMI for high switching frequency and reducing the cost as well as size of device.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.372-374
• /
• 2007

본 논문에서는 LCD Backlight를 위한 기존 Phase shift Full bridge 인버터 방식을 검토하여, 이를 바탕으로 기존의 Full bridge Inverter 토폴로지와 전력 시스템은 동일하게 가져가고 좀 더 나은 성능을 위해 독자 기술의 새로운 구동 및 제어 방식을 구현하고자 한다. 인버터 부의 최적 동작을 위해 인버터 구동 신호의 주파수와 시비율을 고정하는 대신 펄스 개수를 제어하는 새로운 Pulse Count Modulation (PCM) 방식을 제안하며 이론적 및 실험적 검증을 통해 제안된 방식의 우수성을 확인한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.265-267
• /
• 2007

본 논문은 LCD Backlight 구동을 위한 새로운 방식의 회로를 제안한다. 제안된 회로는 Charge Pump 캐패시터를 이용한 Half-Bridge 타입의 인버터로 Full Bridge 회로와 동등한 성능을 갖는다. 제안 회로는 넓은 입력 범위와 넓은 부하 범위에서 영전압 스위칭(ZVS) 확보가 가능해서 인버터의 고효율 동작이 확보되고, MOSFET의 surge 및 noise를 저감시킨다. 제안된 회로의 동작 원리를 설명하고, 시뮬레이션 및 40" LCD 패널에 실제 적용 실험하여, 회로의 동작을 입증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.214-216
• /
• 2005

The PAL (Pohang Accelerator Laboratory) is persuading to construct a SASE-XFEL facility (PAL XFEL) that supplies coherent X-rays. The bright and stable electron beam is essential for the PAL XEL. The electron beams has to have an emittance of 1.0 mm-mrad, a peak current of 3 kA, and a low energy spread of 1.0 MeV. In order to provide reasonably stable SASE output, the RF stability of 0.02% rms is required for both RF phase and amplitude. This is a technologically challenging issue for PAL XFEL. An inverter technology is to be applied to charge the PFN of a new modulator. Therefore, a new inverter system should provide very stable charging performances. This paper presents the development of an ultra stable klystron-modulator with an inverter power supply.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.466-470
• /
• 1991

In this paper, full bridge inverter with IGBT is proposed. By Controlling phase angle difference between 2 arms, PWM controlled high frequency link inverter has VVVF capability. For the simplicity, flexibility and compactness of control circuit, 16 bit single chip microcontroller 8797 BH is used and its characteristic is examined through experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.721-723
• /
• 1993

A PWM switching control strategy based on instantaneous integration concept for reducing hamonic components of inverter system with fluctuating input voltage is presented. Applying this strategy to single phase full bridge PWM inverter through bipolor switching method and unipolor switching method, reduction of hamonic components of output voltage and current is demonstrated through simulation. The system operation is examined and confirmed by experiments.

• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.454-462
• /
• 2019

When compared to traditional bridge-type inverters, the dual-buck inverter has a higher reliability due to the fact that its bridge legs do not have a shoot-through problem. In this paper, the working principle of the dual-buck inverter is analyzed. A comparison of the working modes under full-cycle and half-cycle control is discussed. With half-cycle control, the inverter can realize a higher efficiency. However, this results in current zero-crossing distortion. The corresponding control strategy of the dual-buck inverter is proposed in order to realize both high efficiency and low current harmonic distortion. In addition, the system stability is analyzed. Dead-time is unnecessary due to the advantages of the topology. Thus, the current harmonic distortion can be further reduced. An inverter with the proposed control strategy has the advantages of high reliability, high efficiency and low current harmonic distortion. Finally, simulation and experimental results are given to verify the theoretical analysis.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1315-1324
• /
• 2018

A novel three-phase four-wire inverter topology is presented in this paper. This topology is equipped with a special capacitor balance grid without magnetic saturation. In response to unbalanced load and unequal split DC-link capacitors problems, a qusi-full-bridge DC/DC topology is applied in the balance grid. By using a high-frequency transformer, the energy transfer within the two split dc-link capacitors is realized. The novel topology makes the voltage across two split dc-link capacitors balanced so that the neutral point voltage ripple is inhibited. Under the condition of a stable neutral point voltage, the three-phase four-wire inverter can be equivalent to three independent single phase inverters. As a result, the three-phase inverter can produce symmetrical voltage waves with an unbalanced load. To avoid forward transformer magnetic saturation, the voltages of the primary and secondary windings are controlled to reverse once during each switching period. Furthermore, an improved mode chosen operating principle for this novel topology is designed and analyzed in detail. The simulated results verified the feasibility of this topology and an experimental inverter has been built to test the power quality produced by this topology. Finally, simulation results verify that the novel topology can effectively improve the inhibition of an inverter with a three-phase unbalanced load while decreasing the value of the split capacitor.

• 조명전기설비학회논문지
• /
• 제15권4호
• /
• pp.7-13
• /
• 2001

본 논문에서는 풀브리지 인버터를 사용한 100[W] 고압 나트륨램프용 타려식 전자식 안정기를 설계하였다. L-C 병렬 풀브리지 회로에 대한 P-SPICE 시뮬레이션도 수행하였다 제안된 등가 L-C 병렬공진 탱크 회로에서의 인덕터와 커패시터의 값을 이론적으로 계산하였다. 그리고 계산 결과를 검증하기 위하여 설계에 따른 전자식 안정기를 제작하였다. 실측한 안정기의 제반 특성은 시뮬레이션 결과와 대단히 유사하였다.

• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.283-288
• /
• 2000

본 논문은 마이크로프로세서를 이용하여 구현하는 전파브리지 인버터의 새로운 PWM 제어 방법을 제안한다. 이 방법은 단방향 전파 브리지 인버터의 한 주기를 주파수 변조비로 등간격 분할하고 기준 기본파와 인버터의 출력 기본파의 진폭을 비교하는 PWM 제어 방법이다. 이 방법을 이용하면 각 간격의 turn-on time 계산이 매우 용이하여 마이크로프로세서 구현에 매우 적합하다. 그리고, 고조파 해석에 있어서 주파수 변조비가 크면 모든 고조파를 무시할 수 있음을 보여준다 시뮬레이션과 실험을 통하여 타당성을 입증하였다.