• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.6
• /
• pp.587-595
• /
• 2002

Recently, the electric vehicles which are powered by such sources as battery, solar cell, fuel-cell, and so forth attract increasing attention. However, the unit cell voltages of these power sources are so low that a number of cells should be stacked in series to drive the vehicle inverter systems, which increases the complexity of the structure of power source. In this paper, a high-efficiency high-power boost converter for electric vehicle applications, which is able to convert a relatively low source voltage into a sufficiently high regulated DC link voltage, is proposed, and the design guidelines and the experimental results are presented.

• Resources Recycling
• /
• v.26 no.3
• /
• pp.79-91
• /
• 2017

The core of Hydrogen Fuel Cell Vehicles (FCV) is polymer solid fuel cell (PEFC), and the core material that generates electrochemical electricity in the cell is platinum catalyst. Platinum is localized in South Africa and Russia, and the world production of Pt is about 178 tons per year, which is expensive and recycled. At present, the amount of Pt used in PEFC is $0.2{\sim}0.1mg/cm^2$. In order to reduce the price of the battery and increase the FCV supply, the target is to reduce the amount of Pt used to $0.05{\sim}0.03mg/cm^2$. $Pt-Pd/Al_2O_3$, Pt/C, Pt/GCB, Pt/Au/C, PtCo/C, PtPd/C, etc. by using polyol method using nano Pt, improved Cu-UPD/Pt substitution method and nano-capsule method, Have been researched and developed, and there have been reported techniques for improving the activity of Pt catalysts and stabilizing them. This paper investigates the production technology of nano-Pt and nano-Pt catalysts, recycling of spent Pt catalysts and application trends of Pt catalysts.

• Journal of the Korean Society of Industry Convergence
• /
• v.1 no.1
• /
• pp.31-41
• /
• 1998

Fuel conservation and environmental pollution control are the principal motivating factors that are urging at present widespread research and development activities for electric hybrid vehicles throughout the world. The paper describes different possible energy storage devices, such as battery, flywheel and ultra capacitor, and power sources, such as gasoline engine, diesel engine, gas turbine and fuel cell for next generation hybrid electric vehicle. The technology trend and comparison in energy storage and power devices indicate that battery and gasoline engine, respectively will remain the most viable devices for hybrid vehicle at least in the near future.

• Korean Journal of Materials Research
• /
• v.22 no.3
• /
• pp.159-167
• /
• 2012

Hydrogen is in the spotlight as an alternative next generation energy source for the replacement of fossil fuels because it has high specific energy density and emits almost no pollution, with zero $CO_2$ emission. In order to use hydrogen safely, reliable storage and transportation methods are required. Recently, solid hydrogen storage systems using metal hydrides have been under extensive development for application to fuel cell vehicles and fuel cells of MCFC and SOFC. For the practical use of hydrogen on a commercial basis, hydrogen storage materials should satisfy several requirements such as 1) hydrogen storage capacity of more than 6.5wt.% $H_2$, moderate hydrogen release temperature below $100^{\circ}C$, 3) cyclic reversibility of hydrogen absorption/desorption, 4) non toxicity and low price. Among the candidate materials, Li based metal hydrides are known to be promising materials with high practical potential in view of the above requirements. This paper reviews the characteristics and recent R&D trends of Li based complex hydrides, Li-alanates, Li-borohydrides, and Li-amides/imides.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.6
• /
• pp.1-8
• /
• 2010

In this paper, we present some results of technical surveys, power analyses, and weight estimation on electric propulsion systems for 1-ton class Personal Air Vehicles(PAV) applications. When hybrid electric propulsion is adopted, its power performance using fuel cells and batteries in inferior to that of internal combustion engines. However, hybrid electric propulsion systems may replace IC engines when energy density and power density reach 0.75 kW$^*$hr/kg and 2.5 kW/kg, respectively.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.11
• /
• pp.8-15
• /
• 2020

The government has announced its Hydrogen Economy Roadmap to strengthen global competitiveness on the hydrogen economy by focusing on hydrogen fuel cell electric vehicles and fuel cells. In this regard, the interest on the economics and safety of the infrastructure of hydrogen stations has also increased. In this study, a test bed similar to an actual hydrogen charging facility was built, and a prototype of a piston-type compressor was modeled. In this model, the piston was hydraulically compressed to progressively test leakage, leakage rate, and durability and to check for any malfunction. Moreover, the leakage rate, cylinder leak performance, and compressor operation durability were evaluated for safety; it was confirmed that there were no abnormalities. Nevertheless, an investigation of the long-term use and operating pressure of the compressor is necessary to verify the safety of developing a100-MPa domestic compressor in the future.

• Corrosion Science and Technology
• /
• v.22 no.4
• /
• pp.221-231
• /
• 2023

Interest in aluminum alloys for the hydrogen valves of fuel cell electric vehicles (FCEVs) is growing due to the reduction in fuel efficiency by the high weight. However, when an aluminum alloy is used, deterioration in mechanical characteristics caused by hydrogen embrittlement and wear is regarded as a problem. In this investigation, the aluminum alloy used to prevent hydrogen embrittlement was subjected to surface treatments by performing hard anodizing and plasma ion nitriding processes. The hard anodized Al alloy exhibited brittleness in which the mechanical characteristics rapidly deteriorated due to porosity and defects of surface, resulting in a decrease in the ultimate tensile strength and modulus of toughness by 15.58 and 42.51%, respectively, as the hydrogen charging time increased from 0 to 96 hours. In contrast, no distinct nitriding layer in the plasma ion-nitrided Al alloy was observed due to oxide film formation and processing conditions. However, compared to 0 and 96 hours of hydrogen charging time, the ultimate tensile strength and modulus of toughness decreased by 7.54 and 13.32%, respectively, presenting excellent resistance to hydrogen embrittlement.

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.2
• /
• pp.121-129
• /
• 2022

With the advent of the post-2020 climate regime, the hydrogen industry is growing rapidly around the world. In order to build the hydrogen economy, it is important to identify social issues related to hydrogen and prepare countermeasures for them. Accordingly, this study conducted a semantic network analysis on hydrogen news from NAVER. As a result of the analysis, the number of hydrogen news in 2020 increased by 4.5 times compared to 2016, and as of 2018, the hydrogen issue has shifted from an environmental aspect to an economic aspect. In addition, although the initial government-led hydrogen industry is expanding to the mobility field such as privately-led fuel cell electric vehicles and hydrogen fuel, terms showing concerns about the safety such as explosions are constantly being exposed. Thus, it is necessary not only to expand the hydrogen ecosystem through the participation of private companies, but also to promote hydrogen safety.

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.26-31
• /
• 2023

For durability improvement of polymer electrolyte membrane fuel cell (PEMFC) polymer membrane, accelerated durability evaluation methods that can evaluate durability in a short time have been researched and developed. However, the lifespan of fuel cells for large commercial vehicles such as trucks and buses is more than three times that of passenger cars, and the chemical accelerated stress test (AST) time is also longer, reaching 1,500 hours or more. Therefore, in this study, as a method to evaluate the chemical durability of a membrane within a short time, it was examined whether the durability could be predicted by the pristine membrane characteristics. Hydrogen crossover current density (HCCD) and short resistance (SR) were estimated as initial characteristics, and AST time was predicted through the Fenton experiment, which was possible as an out-of-cell experiment for 3 hours. As the HCCD and fluoride ion emission concentration increased, the AST time tended to be linearly shortened, but there was a deviation (R² ≒0.65). When the SR decreased, the AST time showed a linear increase, and the accuracy was high (R² =0.93), so the AST time could be predicted with the initial SR of the membrane.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.3
• /
• pp.342-347
• /
• 2007

The research on production and application of hydrogen as an alternative energy in the future is being carried out actively. It hydrogen storage is necessary in order that user use hydrogen economically without much difficulty. Among the ways of hydrogen storage the method which is compressed hydrogen gas by high pressure is easier for application than other methods. In this study, we have been calculated gas with changing pressure and temperature variation of container wall through applied to mass and energy balance equation when compressing hydrogen by high pressure, and also to Beattie-Bridgeman equation of state for the kinetic of hydrogen. We will apply above date as a preliminary for design of hydrogen storage tank.