• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.103-113
• /
• 1999

Point contact film thickness in elastohydrodynamic lubrication (EHL) is analyzed by the image processing method for the monochromatic incident light. Interference between the reflected lights both on Cr coating of glass disk and on super finished ball makes circular fringes, which are regarded as film thickness together with numbering of fringe order. In this study, we developed technology to measure the film thickness by analyzing dark and bright intensity waves which results from monochrome green light. Two typical fringe patterns only with intensity values 3re examined for the measurement of point contact EHL film thickness. We expect that this technology will give valuable clue to improve color image processing analysis for high resolution of EHL film thickness with white incident light.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.377-383
• /
• 1996

Recently, a new technique called Electronic Speckle Pattern Inteferometry(ESPI) has been developed to overcome the drawbacks of existing holography. This technique enable real-time interference fringes to be displayed directly on TV monitor without recourse to any form of photographic processing. This research was carried out for the purpose of applying the vibration analysis method employing Electronic Speckle Pattern Interference technique to the vibration analysis of uniform rectangular cantilever plate, The natural vibration frequencies found by ESPI were in fair agreement with theoretical eigen frequencies acquired using theoretical formula G. B. Warburton proposed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 춘계학술대회 논문집
• /
• pp.195-201
• /
• 1991

This paper presents appliation of optical moire topography to mesuring force profiles of dies and clay models for practical use in the field of production engineering. Moire topography has been studied intensively during last few decades in the area of optical physics and its mathmatical theory has now been established. In this study, two optical configurations are suggested in which resultant moire fringes can be readily analyzed, so that 3D proviles of the models are constructed through a series of image processing by suing ma chine vision techniques. Experimental results demonstreated by using a micro- computer and CCD camera show 0.05mm measuring spatial resulution, so that the optical method can effectively adopted in order to overcome many difficulties arising when using the existing contact-type digitizing methods.

• Journal of the Optical Society of Korea
• /
• 제3권2호
• /
• pp.41-46
• /
• 1999

Spatial and temporal dynamics arising in a photorefractive crystal(BaTiO3) during the process of double phase conjugation was studied experimentally. We studied the dynamical effects caused by the buildup of the diffraction grating and turn on of phase conjugated beams, as well as the spatial effects caused by the finite transverse coupling of beams and the propagation direction of beams. We observed conical emission in DPCM. We believe that various temporal and spatial instabilities are due to movement of the nonlinear grating. For a real beam coupling and constructive interaction of interference fringes in the crystal, we observed steady, periodic, irregular temporal behavior. And, by the calculation of the correlation index, we found that the spatial correlation decreased as the transverse interaction region was increased.

• 설비공학논문집
• /
• 제2권4호
• /
• pp.257-267
• /
• 1990

A numerical and experimental investigation has been carried out to understand a characteristic of natural convection within a horizontal non-circular annulus. A finite-difference method has been used to solve the governing equations numerically. The effect of Rayleigh number. Prandtl number, aspect ratio and diameter ratio is studied analytically. The ranges of the parameters studied herein are Rayleigh number from $10^3$ to $2{\times}10^4$, Prandtl number from 0.1 to 10, aspect ratio from 0.25 to 1.5 and diameter ratio from 1.5 to 9.0. A Mach-Zehnder interferometer is used to obtain isothermal fringes for a diameter ratio Do/Di=2.6 and aspect ratio H/L=0.75 experimentally. A comparison between the experimental and numerical results under similar conditions shows good agreement.

• Journal of the Optical Society of Korea
• /
• 제20권3호
• /
• pp.435-440
• /
• 2016

We developed a simple and real-time readout autocorrelator for several tens and sub-10fs pulses, based on the two photon absorption phenomena of a commercial GaP photodetector including a transimpedance amplifier. With a suitable gain adjustment, we demonstrated that the interferometric autocorrelation for sub-nJ pulses delivered as a high output voltage as to resolve all fringes in an autocorrelation trace with features of low noise and a low offset voltage. By fitting the measured quadratic power dependence of output voltages, we obtained the quantum efficiency of TPA for the GaP detector comparable with those of a GaAsP diode and an SHG with a thin BBO crystal. The autocorrelator of a TPA based GaP photodetector is highly suitable for sensitively measuring a few cycle pulses with a broad spectral distribution from 600 nm to 1100 nm.

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.538-545
• /
• 2014

Microlens array (MLA) films have been used as brightness-enhancement components in many illumination systems, such as a backlight, which should meet the industrial needs of low cost and high brightness performance. A hexagonally-arranged MLA (HA-MLA) was chosen due to its high filling factor, which was a prerequisite for achieving high brightness-enhancement capability. The moir$\acute{e}$ fringes produced in a film stack composed of two HA-MLA were investigated, under four different lens configurations, by optical simulation. It was found that randomizing the lens configuration, while keeping the filling factor high, was effective way to develop high-gain MLA films for backlight applications.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.234-235
• /
• 2008

The surface flatness of heteroepitaxially grown 3C-SiC thin films is a key factor affecting electronic and mechanical device applications. This paper describes the surface flatness of poly(polycrystalline) 3C-SiC thin films according to Ar flow rates and the geometric structures of reaction tube, respectively. The poly 3C-SiC thin film was deposited by APCVD (Atmospheric pressure chemical vapor deposition) at $1200^{\circ}C$ using HMDS (Hexamethyildisilane : $Si_2(CH_3)_6)$ as single precursor, and 1~10 slm Ar as the main flow gas. According to the increase of main carrier gas, surface fringes and flatness are improved. It shows the distribution of thickness is formed uniformly.

• Journal of the Optical Society of Korea
• /
• 제19권2호
• /
• pp.165-168
• /
• 2015

A simple method to determine the focal length of a lens using the Talbot image is presented. This method uses only one grating, requiring neither Moir$\acute{e}$ fringe analysis nor the angle between the gratings. The original Fourier transform was used to access the spectrum beyond the limitation set of the usual fast Fourier transform to determine the (de)magnification accurately enough to be used for the focal length. A set of Talbot images simulated numerically with the Fresnel diffraction integral was used to demonstrate the method. For focal lengths between 5550 mm and 5650 mm, the mean difference between the focal lengths determined from the Talbot images and the true values was 3.3 mm with the standard deviation of the difference being 3.8 mm. The true focal lengths can be recovered with an accuracy of 0.06%.

• 한국광학회지
• /
• 제10권3호
• /
• pp.254-258
• /
• 1999

전계흡수형 반도체 광도파로에서 흡수된 빛에 의해 발생된 광전류는 전파되는 파장에 따라 Fabry-Perot 모드의 간섭패턴을 나타냄을 보이고, 이로부터 인가전압에 따른 흡수계수의 변화를 측정할 수 있는 방법을 제시하였다. 광전류 신호는 파장에 따라 공명 반공명을 반복해서 나타내며 그 진폭은 흡수계수의 크기에 의존하므로 전계에 따른 흡수계수의 변화량을 측정 할 수 있었고, 1.55 $\mu\textrm{m}$ 파장에서 역전압 1.5V 인가시 bulk in GaAsP의 흡수계수 변화는 대략 157cm-1임을 알 수 있었다.