• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.1
• /
• pp.27-33
• /
• 2012

Photoelasticity is a technique of experimental methods and has been widely used in various domains of engineering to determine the stress distribution of structures. Without complicated mathematical formulation, this technique can conveniently provide a fairly accurate whole-field stress analysis for a mechanical structure. Here, stress distribution around an inclined crack tip of finite-width plate is studied by 8-step phase-shifting method. This method is a kind of photoelastic phase-shifting techniques and can be used for the determination of the phase values of isochromatics and isoclinics. According to stress-optic law, the stress distribution could be obtained from fringe patterns. The results obtained by polariscope arrangement combined with 8-step method and ABAQUS FEM simulations are compared with each other. Good agreement between them shows that 8-step phase-shifting method is reliable and can be used for determination of stress by experiment.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.11
• /
• pp.2723-2729
• /
• 1993

Moire principles are applied to the measurement of the spindle radial error motion. As opposed to conventional techniques, no master cylinder or ball is needed in the measurement so that the offset and out-of-roundness errors of the master can be inherently eliminated. Two periodic circular gratings are used, one is made on the spindle and the other is held stationary on the reference frame. When the two gratings are seen superimposed during spindle rotation, an interference fringe pattern is observed from which the information on the eccentricity between the two gratings can be extracted with high precision. The optical design and fringe analysis techniques of a prototype measurement system are described in detail with exemplary measurement results.

• Korean Journal of Remote Sensing
• /
• v.21 no.3
• /
• pp.221-228
• /
• 2005

Baekdusan is a Cenozoic stratovolcano in which a series of micro-seismic events and gaseous emissions have been reported in 1990s. Two-pass DInSAR technique was applied to determine displacement in the volcano by using 10 ERS SAR and 41 JERS-1 SAR datasets. Most interferometric phases out of 58 JERS-1 differential interferograms showed concentric fringe patterns that correlated with elevation. From an analysis of fringe-duration relation, the fringe patterns were found to be severely distorted specifically by stratified troposphere. To estimate the tropospheric delay, we used the data in the Sobaeksan located about 20 km away from the summit of Baekdusan. The maximum and mean magnitudes of the phase delay in the Baekdusan were respectively 13.8 cm and 3.8 cm over 1200 m in altitude. After removing tropospheric effects, a mean inflation rate was estimated to be about 3 mm per year from 1992 to 1998. Although the inflation rate of the volcano is inconclusive without ground truth data, the results indicate that there exists slow upward deformation in the Baekdusan volcano.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.1
• /
• pp.38-44
• /
• 2004

An experimental study for a crane hook was performed to investigate the stress distribution along a certain line where the maximum and minimum stresses to be developed. On this line, the isoclinic fringe and/or principal stress direction is constant. The crane hook was modeled into a 2-dimensional plate made of urethane rubber called 'Photoflex' The Photoflex is very sensitive to a load and has low photoelastic fringe constant. The Tardy compensation method with the fringe sharpening process and the 4-step phase shifting method, was used for the photoelastic technique. Experimental results by photoelasticity were compared with the calculated stresses from the simple curved beam theory and tile finite element analysis. Ail the results were close to each other.

• The Journal of the Korea Contents Association
• /
• v.21 no.1
• /
• pp.498-510
• /
• 2021

This study aims to analyze the influence relationship between the level of fringe benefits and relational contract among social workers in the non-profit organization. Under this relationship, we explored the dual mediating effect of perceived superior's support and perceived organizational support. A total of 371 self-administered questionnaires were distributed to social workers in Gwangju, South Korea, and 271 questionnaires (73.0%) were used for study analysis after excluding incomplete and unreliable responses. This study performed structural equation modeling, the results are as follows. Perceived superior's support and perceived organizational support both have a positive (+) influence on relational contract. Furthermore, perceived superior's support and perceived organizational support were found to mediate effect between fringe benefits and relational contract. Therefore, these results contribute to provide academic meaning that the range of future studies by identifying the dual mediated effect of the fringe benefits and social worker 's relational contract.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.3
• /
• pp.37-43
• /
• 2002

Electronic speckle contouring(ESC) based on electronic speckle pattern interferometry is the optical method for measuring object shape by using fringe-projection techniques. This method has the advantages of being non-contact, non-destructive and a whole-field measurement of the surface under investigation. Fringes in ESC represent the difference in depth along the view direction between the master wavefront and the test component. The contour maps of three-dimensional diffuse objects can be obtained by small shifts of optical fiber carrying the dual-object-beams and 4-frame phase shifting. In this study we proposed the contouring method by shifting the collimated illumination beams through optical fiber in order to obtain the contour fringe patterns. And also, we performed the addition of incremental images through the geometrical analysis to obtain the contour fringe interval when we performed the incremental addition of images and experiments based on this method. We obtained both quantitative increment without decorrelation effect and qualitative improvement by reducing the noise of contour fringes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.5
• /
• pp.1524-1533
• /
• 1996

Risidual stress of cylindrical glass rods are measured by photoelasticity to study the variation of stresses with respect to heat treatment temperatures. In order to measure the stresses accurately, fringe sharpening and multiplication techniques are applied to the determination of photoelastic fringe orders. Filon's separationmethod is used to resolve circumferential and redial stress ocmponents from isochromatic fringes which are the same as in-plane maximum shearing stresses. According to the photoelastic measurements, residual stress is increased as the heat treatment temperature of the rods is raised from $560^{\circ}C$ to $650^{\circ}C$ All the circumferential stress components are changed from tensile stresses to compressive ones at approximate $R_m$/$R_o$ = 0.6, where $R_o$/ is outer radius and $R_m$any measured radius. This analysis shows that residual stresses of the glass rods approach zero if the rods are heat-treated near the strain point.

• The Journal of Korean Medicine
• /
• v.21 no.4
• /
• pp.148-158
• /
• 2000

Objective : The purpose of this study was to investigate the back shape of school children using the phase-shifting scanning grating projection moire interferometer, which was developed by the Korea Advanced Institute of Science and Technology and is useful in evaluating three dimensional back shape. Methods : In this study the subjects consisted of 1,358 pupils [711 boys(52.36%), 647 girls(47.64%)] attending elementary and middle schools in Seoul. Their ages ranged from nine to fifteen and the average age was 12.2. With the phase-shifting scanning grating projection moire interferometer, the posterior view of the body were taken to see if there are correlations of moire fringe number, width difference between left and right, and correlation between differences in moire fringe number and width on both sides in the scapular, lumbar and gluteal regions. Results : The results were as follows : I. More frequent findings of fringe were observed on the right in all regions : in the scapular region, 309 boys(43.4%) and 156 girls(24.2%) had more fringe numbers on the right side; in the lumbar region, 68 boys(9.5%) and 11 girls(1.7%); and in the gluteal region, 160 boys(22.4%) and 63 girls(9.8%). Such tendency was striking especially in the scapular and lumbar regions, and in boys rather than in girls. In the scapula, 661 subjects(48.7%) with one moire fringe on either side need further attention and 110 subjects(8.I %) with two or more are required to do follow-up radiography for scoliosis. 2. In an analysis of width difference in the trunk, the left side is wider in all regions except for the gluteal region in boys : in the scapular region 21 boys(3.0%) and 103 girls(15.9%); in the lumbar region, 87 boys(12.2%) and 250 girls(38.6%); and in the gluteal region 197 girls(30.4%) had a wider left side and 45 boys(6.3%) showed a wider right side. 3. In correlation analysis of the number of moire fringe and width difference in each region, the side where more moire fringes were observed was significantly wider in the lumbar and gluteal regions, but not in the scapular region.(p<0.01) Conclusions : From these results, it is concluded that the back shape of elementary and middle school students in Seoul shows that the right side had more moire fringes; the left side was wider; and especially in the lumbar and gluteal regions the side where more moire fringes were observed was wider.

• Research in Plant Disease
• /
• v.26 no.3
• /
• pp.179-182
• /
• 2020

In July 2018, a serious rust symptom was found throughout the fringe trees planted in Gangjin-gun, Korea. Yellow and brown spots were observed on the adaxial (topside) surface of the collected fringe tree leaves, and yellow color aecia were observed on the abaxial (underside) surface leaves. The size of aeciospore and urediniospores of JCK-KCFR1 strain were measured to 41.2 ㎛ (Φ) and 28.84 ㎛ (Φ) with a light microscope. Phylogenetic analysis of the small subunit rRNA, internal transcribed spacer, and large subunit rRNA region indicated that JCK-KCFR1 strain is novel species of the genus Puccinia and closely related to Puccinia kusanoi, which has been reported a rust pathogen on bamboo. In May 2019, rust symptoms were also discovered on the bamboo leaves planted around the fringe tree on Muwisa-ro, and their telia and teliospores were observed on the abaxial leaf surfaces of the bamboo with 100% sequence homology with the rust of the fringe tree. This is the first report that Puccinia sp. JCK-KCFR1 is a new species that requires both primary (fringe tree) and alternative (bamboo) host plants to complete its life cycle in Korea.

• Proceedings of the Optical Society of Korea Conference
• /
• 1996.09a
• /
• pp.50-50
• /
• 1996