• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.5
• /
• pp.507-524
• /
• 2002

Load transfer of implant overdenture varies depending on anchorage systems that are the design of the superstructure and substructure and the choice of attachment. Overload by using improper anchorage system not only will cause fracture of the framework or screw but also may cause failure of osseointegration. Choosing anchorage system in making prosthesis, therefore, can be considered to be one of the most important factors that affect long-term success of implant treatment. In this study, in order to determine the effect of anchorage systems on load transfer in mandibular implant overdenture in which 4 implants were placed in the interforaminal region, patterns of stress distribution in implant supporting bone in case of unilateral vertical loading on mandibular left first molar were compared each other according to various types of anchorage system using three-dimensional photoelastic stress analysis. The five photoelastic overdenture models utilizing Hader bar without cantilever using clips(type 1), cantilevered Hader bar using clips(type 2), cantilevered Hader bar with milled surface using clips(type 3), cantilevered milled-bar using swivel-latchs and frictional pins(type 4), and Hader bar using clip and ERA attachments(type 5), and one cantilevered fixed-detachable prosthesis(type 6) model as control were fabricated. The following conclusions were drawn within the limitations of this study, 1. In all experimental models. the highest stress was concentrated on the most distal implant supporting bone on loaded side. 2. Maximum fringe orders on ipsilateral distal implant supporting bone in a ascending order is as follows: type 5, type 1, type 4, type 2 and type 3, and type 6. 3. Regardless of anchorage systems. more or less stresses were generated on the residual ridge under distal extension base of all overdenture models. To summarize the above mentioned results, in case of the patients with unfavorable biomechanical conditions such as not sufficient number of supporting implants, short length of the implant and unfavorable antero-posterior spread. selecting resilient type attachment or minimizing distal cantilever bar is considered to be appropriate methods to prevent overloading on implants by reducing cantilever effect and gaining more support from the distal residual ridge.

• Journal of the Korean association of regional geographers
• /
• v.17 no.6
• /
• pp.679-697
• /
• 2011

This study analyzed the characteristics of spaces to and from which middle school students transfer, especially centering around the school districts of Southern area in Gyeonggi Province such as Suwon, Osan, Yongin, and Hwaseong. This study was conducted to provide the suggestions regarding educational policies such as the positioning to appropriate school districts, improving of educational environment, and implementing of educational equity, by analyzing, based on the empirical data, the educational spaces of four cities showing rapid population growth due to recent suburbanization. The characteristics of distribution of variables such as schools for each district affecting the student transfer, housing development, and socioeconomics in the research object region are mainly analyzed through the correlation analysis, multiple regression analysis, and cluster analysis. As a result, there is shown a distinct spatial difference between school districts of the cty downtown and urban fringe, and between school districts of the conventional cities(cities that have been from the past: note of translator) and new land development regions. First, the school districts in the city downtown showed lots of transfers between neighboring school districts, while the school districts in the urban fringes showed transfer-out tendencies strongly. Second, it was the new land development regions where the transfer-in rate is the highest in the Southern area of Gyeonggi Province. Third, the said new land development regions required the supply of educational installations and educational support that can meet educational demands, since these regions have relatively lower qualitied educational environments compared to the conventional cities where the fluidity of students is lower. Fourth, in the summary of all of the said three results, the student transfer in the southern area of Gyeonggi Province was shown in the spaces centering around the multi-core area by reflecting the restructuring of suburban area.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.121-126
• /
• 2013

Background: Significance of HPV infection and genic mutation of APC and K-ras in rectal cancer has been investigated but not clarified. The objective of our study was to investigate these parameters in patients with rectal cancer to analyze correlations with biological behaviour, to determine relationships among the three, and also to demonstrate survival prognosis effects. Methods: From December 2007 to September 2008, 75 rectal cancer cases confirmed by histopathology in the Tumor Hospital of Xinjiang Medical University were enrolled. The control group consisted of normal rectal mucous membrane taken simultaneously, a least 10 cm distant from the carcinoma fringe. HPV DNA, the MCR of APC and exon-1 of K-ras were detected by PCR and PCR-SSCP. All results were analyzed in relation to clinical pathological material, using chi-square and correlation analysis via SPSS.13 and Fisher's Exact Probability via STATA. 9.0. All 75 patients were followed up for survival analysis using Kaplan-Meier and Log-rank tests. Results: 55 out of 75 cases demonstrated gene HPV L1 while it was notdetected in normal rectal mucosa tissue. HPV infection was correlated with age and lymphatic metastasis (P<0.05) but not other characteristics, such as ethnicity, tumor size, histological type, tumor type, Duke's stage and infiltration depth. Some 43 cases exhibited APC genic mutation (57.3%) and 34 K-ras genic mutation (45.3%). APC genic mutation was correlated with gender(P<0.05), but not age, histological type, infiltration depth, lymphatic metastasis and Duke's stage. In 55 cases of rectal cancer with HPV infection, there were 31 cases with genic mutation of APC (56.4%) and 24 with genic mutation of K-ras (43.6%). For the 20 cases of rectal cancer with non-HPV infection, the figures were 12 cases (60%) and 10 (50.0%), respectively, with no significant relation. Survival analysis showed no statistical significance for K-ras genic mutation, APC genic mutation or HPV infection (P>0.05). However, the survival time of the patients with HPV infection was a little shorter than in cases without HPV infection. Conclusions: Our results suggest that HPV infection might be an important factor to bring about malignant phenotype of rectal cancer and influence prognosis. Genic mutation of APC and K-ras might be common early molecular events of rectal cancer, but without prognostic effects on medium-term or early stage patients with rectal cancer.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.1
• /
• pp.50-64
• /
• 2009

The freshwater lakes located at the fringe of urban cities are a habitat for diverse organisms. However, they are facing severe danger of environment deterioration and water pollution caused by reckless development of the area. In this study, an ecological management plan was suggested to promote the biodiversity through appointing management area based on the research and analysis data of flora and fauna as well as maintain biodiversity and harmonize utilization of freshwater lakes such as Duryang Reservoir at Sacheon, Gyeongsangnam-do. Base on the data of ecological research and analysis, this study conducted research on biotope assessment, wild life habitat assessment and presence of protected species. As a result, the ecosystem conservation area including multi-layer structured natural forests, waterside and wetland that are home to various species and the edge area with high habitat diversity were recognized as highly preservable regions. Management areas were ecologically disturbed region, highly polluted commercial district and damaged waterside caused by fishing. Proactive management must be implemented through vegetation management such as vegetation transition and shrub planting as well as establishing pollutant management system. The deterioration of waterside and forest vegetation of freshwater lake has a direct influence on biodiversity and water quality. Therefore, the conservation area and development area should be totally separated from each other, and the development area must be restored and managed strictly.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.4
• /
• pp.425-442
• /
• 2004

Statement of problem: A difficulty in achieving a passive-fitting prosthesis can be overcome by individual crown restoation of multiple implants. But individualized crown has another difficulty in control of contact tightness and stress distribution. Purpose: This in vitro study is to evaluate the stress distribution and the magnitude in the supporting tissues around Endopore implants with different crown lengths, interproximal contact tightness, and the splinting effects. Material & methods: Three Endopore implants($4.1{\times}9mm$) were placed in the mandibular posterior edentulous area distal to the canine and photoelastic model was made with PL-2 resin(Measurements Group, Raleigh, USA). Restorations were fabricated in two crown lengths: 9, 13 mm. For non-splinted restorations, individual crowns were fabricated on three custom-milled titanium abutments. After the units were cemented, 4 levels of interproximal contact tightness were evaluated: open, ideal($8{\mu}m$ shim stock drags without tearing), medium($40{\mu}m$), and heavy($80{\mu}m$). For splinted restorations, 3-unit fixed partial dentures were fabricated. This study was examined under simulated non-loaded and loaded conditions(6.8 kg). Photoelastic stress analysis was carried out to measure the fringe order around the implant supporting structure. Results: 1. When restorations were not splinted, the more interproximal contact tightness was increased among the three implants, the more stress was shown in the cervical region of each implant. When crown length was increased, stresses tended to increase in the apex of implants but there were little differences in stress fringes. 2. When nonsplinted restorations were loaded on the first or third implant, stresses were increased in the apex and cervical region of loaded implant. Regardless of interproximal contact tightness level, stresses were not distributed among the three implants. But with tighter interproximal contact, stresses were increased in the cervical region of loaded first or third implant. 3. When the nonsplinted restorations were not loaded, there were little stresses on the supporting structure of implants, but low level stresses were shown in the splinted restorations even after sectioning and soldering. 4. With splinted restorations, there were little differences in stresses between different crown lengths. When splinted restorations were loaded, stresses were increased slightly on the loaded implant, but relatively even stress distribution occurred among the three implants. Conclusions: Splinting the crowns of adjacent implants is recommended for Endopore implants under the overloading situation.

• Journal of the Korean association of regional geographers
• /
• v.16 no.6
• /
• pp.706-723
• /
• 2010

The impervious surface was frequently employed as a proxy of the total environmental burden in the urban area. The impervious surface was extracted from a satellite image and the GIS (Geographical Information System) database for childhood asthma hospitalizations was generated for a total of 62,136 children using the National Health Insurance database of South Korea. Children living in an impervious environment do result in almost twice as many hospitalizations (26.58%) for asthma, as compared to the sub-urban pervious living (15.82%). Furthermore, the risk zones with persistently high hospitalizations for three years were specifically identified over the impervious sub-district alone. The impervious zone showed a small inter-year variation of hospitalizations (r: 0.937) while the sub-urban pervious fringe was found to display a yearly variation(r: 0.371). The strong temporal autocorrelation means that the impervious areas have frequent long-lived hospitalizations for asthma, thus children living in impervious areas were likely to have had more chronic asthma attacks than those living in pervious areas. These experimental results indicate that an impervious surface as thematic parameter of analysis is a crucial explanatory variable for asthma hospitalizations and its longer persistence among children.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.3
• /
• pp.457-478
• /
• 1992

Electrical resistance strain gauges, brittle-coatings, Moir'e fringe analysis, photoelasticity methods, etc, have been employed in the study of stress analysis and three-dimensional photoelasticity method used in this experiment. The author fabricated a total of 24 samples of maxillary and mandibular edentulous ridges with normal and sharp shapes using epoxy resin, one of the photoelastic materials. In addition, complete denture made from artificial resin teeth in other twoo sizes, large and medium size, were affixed to the specimens and attached to an articulator. The following results were attained by cutting 9 slice specimens into 6mm thick portions, in accordance with the three dimensional photoelastic stress freezing method, to analyze stress distribution status under specific static loading in the central, lateral and protrusive occlusions of the shape of edentulous ridge. 1. In the case of central occlusion, when complete resin artificial teeth in large and medium sizes were used on normal and sharp alveolar ridges, high stress distribution was broadly shown in the labio-buccal sides, and low and concentrated in the lingual sides, in all cases. Generally, the highest stresses were shown at the top of the alveolus, or at 2mm below the top of the alveolus, particularly in the specimen 2, 3, and stresses were more or less the same in the symmetrical right and left sides. 2. In the case of lateral occlusion, when the same load was applied, high stresses were shown broadly at the working sides in both the labio-buccal and lingual sides, and low and concentrated at the balanced sides. The highest stresses were shown in the top of the alveolus on the working sides in specimen 2 portion, and the lowest stresses at the balanced sides in specimen 6, slightly higher stresses were shown at retromolar parts in the balanced sides. 3. In the case of protrusive occlusion, high stresses were broadly shown at the labio-buccal sides, and slightly higher stresses at the top 2, 4, and 6mm parts of the alveolus with concentration. The highest stresses were shown in specimen No. 5 and the lowes stresses in specimen 1, 9 and stresses were more of less the same at the symmetrical right and left sides.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.253-263
• /
• 2013

Frequency Scanning Interferometry(FSI) system, one of the most promising optical surface measurement techniques, generally results in superior optical performance comparing with other 3-dimensional measuring methods as its hardware structure is fixed in operation and only the light frequency is scanned in a specific spectral band without vertical scanning of the target surface or the objective lens. FSI system collects a set of images of interference fringe by changing the frequency of light source. After that, it transforms intensity data of acquired image into frequency information, and calculates the height profile of target objects with the help of frequency analysis based on Fast Fourier Transform(FFT). However, it still suffers from optical noise on target surfaces and relatively long processing time due to the number of images acquired in frequency scanning phase. 1) a Polarization-based Frequency Scanning Interferometry(PFSI) is proposed for optical noise robustness. It consists of tunable laser for light source, ${\lambda}/4$ plate in front of reference mirror, ${\lambda}/4$ plate in front of target object, polarizing beam splitter, polarizer in front of image sensor, polarizer in front of the fiber coupled light source, ${\lambda}/2$ plate between PBS and polarizer of the light source. Using the proposed system, we can solve the problem of fringe image with low contrast by using polarization technique. Also, we can control light distribution of object beam and reference beam. 2) the signal processing acceleration method is proposed for PFSI, based on parallel processing architecture, which consists of parallel processing hardware and software such as Graphic Processing Unit(GPU) and Compute Unified Device Architecture(CUDA). As a result, the processing time reaches into tact time level of real-time processing. Finally, the proposed system is evaluated in terms of accuracy and processing speed through a series of experiment and the obtained results show the effectiveness of the proposed system and method.

• Asian Journal of Turfgrass Science
• /
• v.23 no.1
• /
• pp.143-150
• /
• 2009

High salt concentration is one of the most important limit factor on plant growth at a disused saltpan for golf course construction site. The control of salt in soil is definitely required and the monitoring of salt concentration in soil and ground water also required to amend soil physiochemical properties. This research was carried out to monitor the pH and salt concentration changes by the height of ground water. By the physiochemical analysis test, the soil contains a high salt concentration and classified as a slight alkaline clay soil. The height of ground water table changed to 1.3m, 3.3m and 2.8m at dry season(mid-late June, 2005), monsoon season(early-mid July) and after monsoon(late July), respectively. Compare to the average ground level of 2.9m, the ground water was over flooded about OAm at monsoon season. The electrical conductivity(ECe) was measured above $4.0dS{\cdot}m^{-1}$ over all areas and however, some areas showed over $20dS{\cdot}m^{-1}$. During a monsoon season, ECe was lowered to $1.2{\sim}15.0dS{\cdot}m^{-1}$, compared with those of the dry season. Therefore, the interception of the capillary connection between planting layer and ground water which contains high salt concentration should be adapted when golf courses are constructed on disused saltpan. The phytotoxicity caused by salt damage may be controled by the interception of capillary fringe of salt flow to the topsoil profile at the upper layer of the ground water table.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.711-721
• /
• 1997

The purpose of this study was to investigate the stress distribution and intensity derived from the transpalatal lingual arch in the investing bone composed of photoelastic material(PL-3). The transpalatal lingual arch wire was deflected in the horizontal and vertical direction to give the various conditions. The two-dimensional photoelastic stress analysis was performed, and the stress distrebution was recored by photography The results were as follows: 1. In bilateral expansion, as horizontal deflection was singly applied, the stress was more concentrated on the root apex in square free end than round. In square free end, as vertical deflection was increased gradually, the black line meaning center of rotation moved inferiorly together with the increment of whole fringes. 2. In application of vertical deflection on anchorage side for unilateral expansion, the stress distribution that expansive force leaned to expansion side was observed. As vortical deflection increased, the extruding stress was observed on molar of expansion side. And as horizontal deflection increased, the tipping stress on the molar of anchorage side was observed. 3. In unilateral rotation with the asymmetric toe-in, the fringe appeared on the distal aspect of root apex.